List of waitForCondition() Examples

Examples of waitForCondition()

ch.ethz.ssh2.Session.waitForCondition()
This method blocks until certain conditions hold true on the underlying SSH-2 channel.
This method returns as soon as one of the following happens:
- at least of the specified conditions (see {@link ChannelCondition}) holds true
- timeout > 0 and a timeout occured (TIMEOUT will be set in result conditions)
- the underlying channel was closed (CLOSED will be set in result conditions)
In any case, the result value contains ALL current conditions, which may be more than the specified condition set (i.e., never use the "==" operator to test for conditions in the bitmask, see also comments in {@link ChannelCondition}).
Note: do NOT call this method if you want to wait for STDOUT_DATA or STDERR_DATA and there are concurrent threads (e.g., StreamGobblers) that operate on either of the two InputStreams of this Session (otherwise this method may block, even though more data is available in the StreamGobblers). @param condition_set a bitmask based on {@link ChannelCondition} values @param timeout non-negative timeout in ms, 0 means no timeout @return all bitmask specifying all current conditions that are true
com.thoughtworks.selenium.DefaultSelenium.waitForCondition()
com.thoughtworks.selenium.Selenium.waitForCondition()
Runs the specified JavaScript snippet repeatedly until it evaluates to "true". The snippet may have multiple lines, but only the result of the last line will be considered.
Note that, by default, the snippet will be run in the runner's test window, not in the window of your application. To get the window of your application, you can use the JavaScript snippet selenium.browserbot.getCurrentWindow(), and then run your JavaScript in there
@param script the JavaScript snippet to run @param timeout a timeout in milliseconds, after which this command will return with an error
com.trilead.ssh2.Session.waitForCondition()
This method blocks until certain conditions hold true on the underlying SSH-2 channel.
This method returns as soon as one of the following happens:
- at least of the specified conditions (see {@link ChannelCondition}) holds true
- timeout > 0 and a timeout occured (TIMEOUT will be set in result conditions)
- the underlying channel was closed (CLOSED will be set in result conditions)
In any case, the result value contains ALL current conditions, which may be more than the specified condition set (i.e., never use the "==" operator to test for conditions in the bitmask, see also comments in {@link ChannelCondition}).
Note: do NOT call this method if you want to wait for STDOUT_DATA or STDERR_DATA and there are concurrent threads (e.g., StreamGobblers) that operate on either of the two InputStreams of this Session (otherwise this method may block, even though more data is available in the StreamGobblers). @param condition_set a bitmask based on {@link ChannelCondition} values @param timeout non-negative timeout in ms, 0 means no timeout @return all bitmask specifying all current conditions that are true
net.thucydides.core.pages.integration.StaticSitePage.waitForCondition()

Examples of com.trilead.ssh2.Session.waitForCondition()

                InputStream stderr = sess.getStderr();


                byte[] buffer = new byte[8192];
                while (true) {
                    if ((stdout.available() == 0) && (stderr.available() == 0)) {
                        int conditions = sess.waitForCondition(ChannelCondition.STDOUT_DATA | ChannelCondition.STDERR_DATA | ChannelCondition.EOF, 120000);


                        if ((conditions & ChannelCondition.TIMEOUT) != 0) {
                            s_logger.info("Timeout while waiting for data from peer.");
                            return null;
                        }

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()

                InputStream stderr = sess.getStderr();


                byte[] buffer = new byte[8192];
                while (true) {
                    if ((stdout.available() == 0) && (stderr.available() == 0)) {
                        int conditions = sess.waitForCondition(
                                ChannelCondition.STDOUT_DATA
                                | ChannelCondition.STDERR_DATA
                                | ChannelCondition.EOF, 120000);


                        if ((conditions & ChannelCondition.TIMEOUT) != 0) {

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()




                byte[] buffer = new byte[8192];
                while (true) {
                    if ((stdout.available() == 0) && (stderr.available() == 0)) {
                        int conditions = sess.waitForCondition(
                                ChannelCondition.STDOUT_DATA
                                | ChannelCondition.STDERR_DATA
                                | ChannelCondition.EOF, 120000);


                        if ((conditions & ChannelCondition.TIMEOUT) != 0) {

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()

        if (stdout == null || stderr == null) {
          throw new sshException("stdout or stderr of ssh session is null");
        }
        
        if ((stdout.available() == 0) && (stderr.available() == 0)) {
          int conditions = sshSession.waitForCondition(
              ChannelCondition.STDOUT_DATA
              | ChannelCondition.STDERR_DATA
              | ChannelCondition.EOF, 120000);
          
          if ((conditions & ChannelCondition.TIMEOUT) != 0) {

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()

        


        byte[] buffer = new byte[8192];
        while (true) {
          if ((stdout.available() == 0) && (stderr.available() == 0)) {
            int conditions = sess.waitForCondition(
                ChannelCondition.STDOUT_DATA
                    | ChannelCondition.STDERR_DATA
                    | ChannelCondition.EOF, 120000);


            if ((conditions & ChannelCondition.TIMEOUT) != 0) {

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()

            InputStream stderr = sess.getStderr();


            byte[] buffer = new byte[8192];
            while (true) {
                if ((stdout.available() == 0) && (stderr.available() == 0)) {
                    int conditions = sess.waitForCondition(ChannelCondition.STDOUT_DATA | ChannelCondition.STDERR_DATA | ChannelCondition.EOF, 120000);


                    if ((conditions & ChannelCondition.TIMEOUT) != 0) {
                        s_logger.info("Timeout while waiting for data from peer.");
                        System.exit(2);
                    }

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()

                InputStream stderr = sess.getStderr();


                byte[] buffer = new byte[8192];
                while (true) {
                    if ((stdout.available() == 0) && (stderr.available() == 0)) {
                        int conditions = sess.waitForCondition(ChannelCondition.STDOUT_DATA | ChannelCondition.STDERR_DATA | ChannelCondition.EOF, 120000);


                        if ((conditions & ChannelCondition.TIMEOUT) != 0) {
                            s_logger.info("Timeout while waiting for data from peer.");
                            return null;
                        }

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()

                InputStream stderr = sess.getStderr();


                byte[] buffer = new byte[8192];
                while (true) {
                    if ((stdout.available() == 0) && (stderr.available() == 0)) {
                        int conditions = sess.waitForCondition(ChannelCondition.STDOUT_DATA | ChannelCondition.STDERR_DATA | ChannelCondition.EOF, 120000);


                        if ((conditions & ChannelCondition.TIMEOUT) != 0) {
                            s_logger.info("Timeout while waiting for data from peer.");
                            return null;
                        }

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()

                InputStream stderr = sess.getStderr();


                byte[] buffer = new byte[8192];
                while (true) {
                    if ((stdout.available() == 0) && (stderr.available() == 0)) {
                        int conditions = sess.waitForCondition(ChannelCondition.STDOUT_DATA | ChannelCondition.STDERR_DATA | ChannelCondition.EOF, 120000);


                        if ((conditions & ChannelCondition.TIMEOUT) != 0) {
                            s_logger.info("Timeout while waiting for data from peer.");
                            return null;
                        }

View Full Code Here

Examples of com.trilead.ssh2.Session.waitForCondition()

                InputStream stderr = sess.getStderr();


                byte[] buffer = new byte[8192];
                while (true) {
                    if ((stdout.available() == 0) && (stderr.available() == 0)) {
                        int conditions = sess.waitForCondition(ChannelCondition.STDOUT_DATA | ChannelCondition.STDERR_DATA | ChannelCondition.EOF, 120000);


                        if ((conditions & ChannelCondition.TIMEOUT) != 0) {
                            s_logger.info("Timeout while waiting for data from peer.");
                            return null;
                        }

View Full Code Here

0 1 2

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.