List of visitIntInsn() Examples

Examples of visitIntInsn()

com.alibaba.fastjson.asm.MethodVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode is either BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
When opcode is BIPUSH, operand value should be between Byte.MIN_VALUE and Byte.MAX_VALUE.
When opcode is SIPUSH, operand value should be between Short.MIN_VALUE and Short.MAX_VALUE.
When opcode is NEWARRAY, operand value should be one of {@link Opcodes#T_BOOLEAN}, {@link Opcodes#T_CHAR}, {@link Opcodes#T_FLOAT}, {@link Opcodes#T_DOUBLE}, {@link Opcodes#T_BYTE}, {@link Opcodes#T_SHORT}, {@link Opcodes#T_INT} or {@link Opcodes#T_LONG}.
com.sleepycat.asm.MethodVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode iseither BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
When opcode is BIPUSH, operand value should be between Byte.MIN_VALUE and Byte.MAX_VALUE.
When opcode is SIPUSH, operand value should be between Short.MIN_VALUE and Short.MAX_VALUE.
When opcode is NEWARRAY, operand value should be one of {@link Opcodes#T_BOOLEAN}, {@link Opcodes#T_CHAR}, {@link Opcodes#T_FLOAT}, {@link Opcodes#T_DOUBLE}, {@link Opcodes#T_BYTE}, {@link Opcodes#T_SHORT}, {@link Opcodes#T_INT} or {@link Opcodes#T_LONG}.
org.apache.openejb.asm.MethodVisitor.visitIntInsn()
org.apache.xbean.asm.MethodVisitor.visitIntInsn()
org.apache.xbean.asm4.MethodVisitor.visitIntInsn()
org.apache.xbean.asm5.MethodVisitor.visitIntInsn()
org.deuce.objectweb.asm.MethodVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode iseither BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
Whenopcode is BIPUSH, operand value should be between Byte.MIN_VALUE and Byte.MAX_VALUE.
When opcode is SIPUSH, operand value should be between Short.MIN_VALUE and Short.MAX_VALUE.
When opcode is NEWARRAY, operand value should be one of {@link Opcodes#T_BOOLEAN}, {@link Opcodes#T_CHAR}, {@link Opcodes#T_FLOAT}, {@link Opcodes#T_DOUBLE}, {@link Opcodes#T_BYTE}, {@link Opcodes#T_SHORT}, {@link Opcodes#T_INT} or {@link Opcodes#T_LONG}.
org.drools.asm.MethodVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode iseither BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
When opcode is BIPUSH, operand value should be between Byte.MIN_VALUE and Byte.MAX_VALUE.
When opcode is SIPUSH, operand value should be between Short.MIN_VALUE and Short.MAX_VALUE.
When opcode is NEWARRAY, operand value should be one of {@link Opcodes#T_BOOLEAN}, {@link Opcodes#T_CHAR}, {@link Opcodes#T_FLOAT}, {@link Opcodes#T_DOUBLE}, {@link Opcodes#T_BYTE}, {@link Opcodes#T_SHORT}, {@link Opcodes#T_INT} or {@link Opcodes#T_LONG}.
org.eclipse.persistence.internal.libraries.asm.CodeVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode iseither BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
org.eclipse.persistence.internal.libraries.asm.MethodVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode is either BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
When opcode is BIPUSH, operand value should be between Byte.MIN_VALUE and Byte.MAX_VALUE.
When opcode is SIPUSH, operand value should be between Short.MIN_VALUE and Short.MAX_VALUE.
When opcode is NEWARRAY, operand value should be one of {@link Opcodes#T_BOOLEAN}, {@link Opcodes#T_CHAR}, {@link Opcodes#T_FLOAT}, {@link Opcodes#T_DOUBLE}, {@link Opcodes#T_BYTE}, {@link Opcodes#T_SHORT}, {@link Opcodes#T_INT} or {@link Opcodes#T_LONG}.
org.mvel2.asm.MethodVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode is either BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
When opcode is BIPUSH, operand value should be between Byte.MIN_VALUE and Byte.MAX_VALUE.
When opcode is SIPUSH, operand value should be between Short.MIN_VALUE and Short.MAX_VALUE.
When opcode is NEWARRAY, operand value should be one of {@link Opcodes#T_BOOLEAN}, {@link Opcodes#T_CHAR}, {@link Opcodes#T_FLOAT}, {@link Opcodes#T_DOUBLE}, {@link Opcodes#T_BYTE}, {@link Opcodes#T_SHORT}, {@link Opcodes#T_INT} or {@link Opcodes#T_LONG}.
org.objectweb.asm.CodeVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode iseither BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
org.objectweb.asm.MethodVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode iseither BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
When opcode is BIPUSH, operand value should be between Byte.MIN_VALUE and Byte.MAX_VALUE.
When opcode is SIPUSH, operand value should be between Short.MIN_VALUE and Short.MAX_VALUE.
When opcode is NEWARRAY, operand value should be one of {@link Opcodes#T_BOOLEAN}, {@link Opcodes#T_CHAR}, {@link Opcodes#T_FLOAT}, {@link Opcodes#T_DOUBLE}, {@link Opcodes#T_BYTE}, {@link Opcodes#T_SHORT}, {@link Opcodes#T_INT} or {@link Opcodes#T_LONG}.
org.objectweb.asm.commons.GeneratorAdapter.visitIntInsn()
org.ow2.asm.MethodVisitor.visitIntInsn()
Visits an instruction with a single int operand. @param opcode the opcode of the instruction to be visited. This opcode iseither BIPUSH, SIPUSH or NEWARRAY. @param operand the operand of the instruction to be visited.
Whenopcode is BIPUSH, operand value should be between Byte.MIN_VALUE and Byte.MAX_VALUE.
When opcode is SIPUSH, operand value should be between Short.MIN_VALUE and Short.MAX_VALUE.
When opcode is NEWARRAY, operand value should be one of {@link Opcodes#T_BOOLEAN}, {@link Opcodes#T_CHAR}, {@link Opcodes#T_FLOAT}, {@link Opcodes#T_DOUBLE}, {@link Opcodes#T_BYTE}, {@link Opcodes#T_SHORT}, {@link Opcodes#T_INT} or {@link Opcodes#T_LONG}.
org.ow2.easybeans.asm.MethodVisitor.visitIntInsn()

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()


                        x = Math.max( 3, x );


                    }  else if ( "long".equals( field.getTypeName() ) ) {


                        mv.visitIntInsn( BIPUSH, 31 );
                        mv.visitVarInsn( ILOAD, 1 );
                        mv.visitInsn( IMUL );
                        mv.visitVarInsn( ALOAD, 0 );
                        mv.visitMethodInsn( INVOKEVIRTUAL, proxyType, BuildUtils.getterName( field.getName(), field.getTypeName() ),
                                            "()" + Type.getDescriptor( field.getType() ) );

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()

                        mv.visitMethodInsn( INVOKEVIRTUAL, proxyType, BuildUtils.getterName( field.getName(), field.getTypeName() ),
                                            "()" + Type.getDescriptor( field.getType() ) );
                        mv.visitVarInsn( ALOAD, 0 );
                        mv.visitMethodInsn( INVOKEVIRTUAL, proxyType, BuildUtils.getterName( field.getName(), field.getTypeName() ),
                                            "()" + Type.getDescriptor( field.getType() ) );
                        mv.visitIntInsn( BIPUSH, 32 );
                        mv.visitInsn( LUSHR );
                        mv.visitInsn( LXOR );
                        mv.visitInsn( L2I );
                        mv.visitInsn( IADD );
                        mv.visitVarInsn( ISTORE, 1 );

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()


                        x = Math.max( 6, x );


                    } else {


                        mv.visitIntInsn( BIPUSH, 31 );
                        mv.visitVarInsn( ILOAD, 1 );
                        mv.visitInsn( IMUL );
                        mv.visitVarInsn( ALOAD, 0 );
                        mv.visitMethodInsn( INVOKEVIRTUAL, proxyType, BuildUtils.getterName( field.getName(), field.getTypeName() ),
                                            "()" + Type.getDescriptor( field.getType() ) );

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()

        MethodVisitor mv;


        {
            mv = cw.visitMethod( ACC_PUBLIC, "hashCode", "()I", null, null );
            mv.visitCode();
            mv.visitIntInsn( BIPUSH, 31 );
            mv.visitVarInsn( ISTORE, 1 );


            int count = 0;
            int x = 2;
            int y = 2;

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()

                if ( field.isKey() ) {
                    count++;


                    if ( ! BuildUtils.isPrimitive( field.getTypeName() ) ) {


                        mv.visitIntInsn( BIPUSH, 31 );
                        mv.visitVarInsn( ILOAD, 1 );
                        mv.visitInsn( IMUL );
                        mv.visitVarInsn( ALOAD, 0 );
                        mv.visitMethodInsn( INVOKEVIRTUAL, proxyType, BuildUtils.getterName( field.getName(), field.getTypeName() ), 
                                            "()" + Type.getDescriptor( field.getType() ) );

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()

                        mv.visitJumpInsn( GOTO, l3 );
                        mv.visitLabel( l2 );
                        mv.visitInsn( LCONST_0 );
                        mv.visitLabel( l3 );
                        mv.visitVarInsn( LSTORE, 2 );
                        mv.visitIntInsn( BIPUSH, 31 );
                        mv.visitVarInsn( ILOAD, 1 );
                        mv.visitInsn( IMUL );
                        mv.visitVarInsn( LLOAD, 2 );
                        mv.visitVarInsn( LLOAD, 2 );
                        mv.visitIntInsn( BIPUSH, 32 );

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()

                        mv.visitIntInsn( BIPUSH, 31 );
                        mv.visitVarInsn( ILOAD, 1 );
                        mv.visitInsn( IMUL );
                        mv.visitVarInsn( LLOAD, 2 );
                        mv.visitVarInsn( LLOAD, 2 );
                        mv.visitIntInsn( BIPUSH, 32 );
                        mv.visitInsn( LUSHR );
                        mv.visitInsn( LXOR );
                        mv.visitInsn( L2I );
                        mv.visitInsn( IADD );
                        mv.visitVarInsn( ISTORE, 1 );

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()

                        x = Math.max( 6, x );
                        y = Math.max( 4, y );


                    } else if ( "boolean".equals( field.getTypeName() ) ) {


                        mv.visitIntInsn( BIPUSH, 31 );
                        mv.visitVarInsn( ILOAD, 1 );
                        mv.visitInsn( IMUL );
                        mv.visitVarInsn( ALOAD, 0 );
                        mv.visitMethodInsn( INVOKEVIRTUAL, proxyType, BuildUtils.getterName( field.getName(), field.getTypeName() ), 
                                            "()" + Type.getDescriptor( field.getType() ) );

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()

                        mv.visitJumpInsn( GOTO, l3 );
                        mv.visitLabel( l2 );
                        mv.visitInsn( LCONST_0 );
                        mv.visitLabel( l3 );
                        mv.visitVarInsn( LSTORE, 2 );
                        mv.visitIntInsn( BIPUSH, 31 );
                        mv.visitVarInsn( ILOAD, 1 );
                        mv.visitInsn( IMUL );
                        mv.visitVarInsn( LLOAD, 2 );
                        mv.visitVarInsn( LLOAD, 2 );
                        mv.visitIntInsn( BIPUSH, 32 );

View Full Code Here

Examples of org.mvel2.asm.MethodVisitor.visitIntInsn()

                        mv.visitIntInsn( BIPUSH, 31 );
                        mv.visitVarInsn( ILOAD, 1 );
                        mv.visitInsn( IMUL );
                        mv.visitVarInsn( LLOAD, 2 );
                        mv.visitVarInsn( LLOAD, 2 );
                        mv.visitIntInsn( BIPUSH, 32 );
                        mv.visitInsn( LUSHR );
                        mv.visitInsn( LXOR );
                        mv.visitInsn( L2I );
                        mv.visitInsn( IADD);
                        mv.visitVarInsn( ISTORE, 1 );

View Full Code Here

0 1 2 3 4 5 6

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.