List of readPacket() Examples

Examples of readPacket()

com.caucho.hmtp.HmtpReader.readPacket()
Reads the next HMTP packet from the stream, returning false on end of file.
com.caucho.hmtp.HmtpWebSocketReader.readPacket()
Reads the next HMTP packet from the stream, returning false on end of file.
com.chaosinmotion.asn1.TestParser.readPacket()
com.sun.messaging.jmq.io.Packet.readPacket()
Read a packet from a ReadableByteChannel. This method may be used for blocking and non-blocking I/O. If you are using blocking I/O then you should specify "true" for 'block'. If you are using non-blocking then specify "false". Returns "true" if a complete packet has been read, else "false". If this method returns false then you may call it again (as many times as necessary) to try and complete the read. If 'block' is true, then the method will block until a complete packet is read. If the packet being read is larger than the limit set by setMaxPacketSize() then the packet bytes are skipped over and this method will throw a BigPacketException. At that point the packet is partially constructed, and only the header fields in the fixed portion of the packet are valid.
com.sun.messaging.jmq.io.ReadWritePacket.readPacket()
Read packet from an InputStream. This method reads one packet from the InputStream and sets the state of this object to reflect the packet read. @param is the InputStream to read the packet from
com.sun.messaging.jmq.transport.httptunnel.HttpTunnelPacket.readPacket()
Read a packet from the given InputStream.
com.xuggle.mediatool.IMediaReader.readPacket()
Decodes the next packet and calls all registered {@link IMediaListener}objects.
If a complete {@link IVideoPicture} or {@link IAudioSamples} set aredecoded, it will be dispatched to the listeners added to the media reader.

This method will automatically call {@link #open()} if it has notalready been called, and will automatically call {@link #close()} whenit reads an error or end of file from the file. The default close behavior can be changed with {@link #setCloseOnEofOnly(boolean)}.
@return null if there are more packets to read, otherwise return an IErrorinstance. If {@link IError#getType()} =={@link com.xuggle.xuggler.IError.Type#ERROR_EOF} then end of filehas been reached.
com.xuggle.mediatool.MediaReader.readPacket()
This decodes the next packet and calls registered {@link IMediaListener}s.
If a complete {@link IVideoPicture} or {@link IAudioSamples} set aredecoded, it will be dispatched to the listeners added to the media reader.
@return null if there are more packets to read, otherwise return an IErrorinstance. If {@link com.xuggle.xuggler.IError#getType()} =={@link com.xuggle.xuggler.IError.Type#ERROR_EOF} then end of filehas been reached.
org.activemq.io.WireFormat.readPacket()
Reads a packet from the given input stream @param in @return @throws IOException
org.activemq.io.impl.DefaultWireFormat.readPacket()
org.bouncycastle.bcpg.BCPGInputStream.readPacket()
org.bouncycastle2.bcpg.BCPGInputStream.readPacket()
org.codehaus.activemq.io.WireFormat.readPacket()
Reads a packet from the given input stream @param in @return @throws IOException
org.codehaus.activemq.io.impl.DefaultWireFormat.readPacket()
org.hxzon.asn1.goose.GoosePduParser.readPacket()
The readPacket method is called by any code looking to parse an incoming BER packet, such as a request packet. This starts the internal state of this custom parser, and builds the appropriate node object, returning it. On the end of file, this returns null. @param stream @return @throws IOException
org.hxzon.asn1.mms.MmsPduParser.readPacket()
The readPacket method is called by any code looking to parse an incoming BER packet, such as a request packet. This starts the internal state of this custom parser, and builds the appropriate node object, returning it. On the end of file, this returns null. @param stream @return @throws IOException
org.hxzon.asn1.sv.SvPduParser.readPacket()
The readPacket method is called by any code looking to parse an incoming BER packet, such as a request packet. This starts the internal state of this custom parser, and builds the appropriate node object, returning it. On the end of file, this returns null. @param stream @return @throws IOException

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()

            throw new IOException(
                "public key ring doesn't start with public key tag: " +
                "tag 0x" + Integer.toHexString(initialTag));
        }


        PublicKeyPacket pubPk = (PublicKeyPacket)pIn.readPacket();
        TrustPacket     trustPk = readOptionalTrustPacket(pIn);


        // direct signatures and revocations
        List keySigs = readSignaturesAndTrust(pIn);

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()




        // Read subkeys
        while (pIn.nextPacketTag() == PacketTags.PUBLIC_SUBKEY)
        {
            PublicKeyPacket pk = (PublicKeyPacket)pIn.readPacket();
            TrustPacket     kTrust = readOptionalTrustPacket(pIn);


            // PGP 8 actually leaves out the signature.
            List sigList = readSignaturesAndTrust(pIn);

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()

            throw new IOException(
                "public key ring doesn't start with public key tag: " +
                "tag 0x" + Integer.toHexString(initialTag));
        }


        PublicKeyPacket pubPk = (PublicKeyPacket)pIn.readPacket();
        TrustPacket     trustPk = readOptionalTrustPacket(pIn);


        // direct signatures and revocations
        List keySigs = readSignaturesAndTrust(pIn);

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()

            throw new IOException(
                "secret key ring doesn't start with secret key tag: " +
                "tag 0x" + Integer.toHexString(initialTag));
        }


        SecretKeyPacket secret = (SecretKeyPacket)pIn.readPacket();


        //
        // ignore GPG comment packets if found.
        //
        while (pIn.nextPacketTag() == PacketTags.EXPERIMENTAL_2)

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()

        //
        // ignore GPG comment packets if found.
        //
        while (pIn.nextPacketTag() == PacketTags.EXPERIMENTAL_2)
        {
            pIn.readPacket();
        }
        
        TrustPacket trust = readOptionalTrustPacket(pIn);


        // revocation and direct signatures

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()

        while (pIn.nextPacketTag() == PacketTags.SECRET_SUBKEY
            || pIn.nextPacketTag() == PacketTags.PUBLIC_SUBKEY)
        {
            if (pIn.nextPacketTag() == PacketTags.SECRET_SUBKEY)
            {
                SecretSubkeyPacket    sub = (SecretSubkeyPacket)pIn.readPacket();


                //
                // ignore GPG comment packets if found.
                //
                while (pIn.nextPacketTag() == PacketTags.EXPERIMENTAL_2)

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()

                //
                // ignore GPG comment packets if found.
                //
                while (pIn.nextPacketTag() == PacketTags.EXPERIMENTAL_2)
                {
                    pIn.readPacket();
                }


                TrustPacket subTrust = readOptionalTrustPacket(pIn);
                List        sigList = readSignaturesAndTrust(pIn);

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()


                keys.add(new PGPSecretKey(sub, new PGPPublicKey(sub.getPublicKeyPacket(), subTrust, sigList, fingerPrintCalculator)));
            }
            else
            {
                PublicSubkeyPacket sub = (PublicSubkeyPacket)pIn.readPacket();


                TrustPacket subTrust = readOptionalTrustPacket(pIn);
                List        sigList = readSignaturesAndTrust(pIn);


                extraPubKeys.add(new PGPPublicKey(sub, subTrust, sigList, fingerPrintCalculator));

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()

            throw new IOException(
                "public key ring doesn't start with public key tag: " +
                "tag 0x" + Integer.toHexString(initialTag));
        }


        PublicKeyPacket pubPk = (PublicKeyPacket)pIn.readPacket();
        TrustPacket     trustPk = readOptionalTrustPacket(pIn);


        // direct signatures and revocations
        List keySigs = readSignaturesAndTrust(pIn);

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGInputStream.readPacket()




        // Read subkeys
        while (pIn.nextPacketTag() == PacketTags.PUBLIC_SUBKEY)
        {
            PublicKeyPacket pk = (PublicKeyPacket)pIn.readPacket();
            TrustPacket     kTrust = readOptionalTrustPacket(pIn);


            // PGP 8 actually leaves out the signature.
            List sigList = readSignaturesAndTrust(pIn);

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.