List of outcode() Examples

Examples of outcode()

edu.umd.cs.piccolo.util.PBounds.outcode()
java.awt.Rectangle.outcode()
java.awt.geom.Rectangle2D.outcode()
Determines where the specified coordinates lie with respect to this Rectangle2D. This method computes a binary OR of the appropriate mask values indicating, for each side of this Rectangle2D, whether or not the specified coordinates are on the same side of the edge as the rest of this Rectangle2D. @param x the specified X coordinate @param y the specified Y coordinate @return the logical OR of all appropriate out codes. @see #OUT_LEFT @see #OUT_TOP @see #OUT_RIGHT @see #OUT_BOTTOM @since 1.2

Examples of java.awt.geom.Rectangle2D.outcode()

    harness.check(r.outcode(10.0, 0.0) == 0);
    harness.check(r.outcode(10.0, 10.0) == 0);
    harness.check(r.outcode(-5.0, 5.0) == Rectangle2D.OUT_LEFT);    
    harness.check(r.outcode(15.0, 5.0) == Rectangle2D.OUT_RIGHT);    
    harness.check(r.outcode(5.0, -5.0) == Rectangle2D.OUT_TOP);    
    harness.check(r.outcode(5.0, 15.0) == Rectangle2D.OUT_BOTTOM);    
    harness.check(r.outcode(-5.0, -5.0) == (Rectangle2D.OUT_LEFT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, -5.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, 15.0) == (Rectangle2D.OUT_RIGHT

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

    harness.check(r.outcode(10.0, 10.0) == 0);
    harness.check(r.outcode(-5.0, 5.0) == Rectangle2D.OUT_LEFT);    
    harness.check(r.outcode(15.0, 5.0) == Rectangle2D.OUT_RIGHT);    
    harness.check(r.outcode(5.0, -5.0) == Rectangle2D.OUT_TOP);    
    harness.check(r.outcode(5.0, 15.0) == Rectangle2D.OUT_BOTTOM);    
    harness.check(r.outcode(-5.0, -5.0) == (Rectangle2D.OUT_LEFT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, -5.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, 15.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_BOTTOM));

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

    harness.check(r.outcode(15.0, 5.0) == Rectangle2D.OUT_RIGHT);    
    harness.check(r.outcode(5.0, -5.0) == Rectangle2D.OUT_TOP);    
    harness.check(r.outcode(5.0, 15.0) == Rectangle2D.OUT_BOTTOM);    
    harness.check(r.outcode(-5.0, -5.0) == (Rectangle2D.OUT_LEFT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, -5.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, 15.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_BOTTOM));    
    harness.check(r.outcode(-5.0, 15.0) == (Rectangle2D.OUT_LEFT 
            | Rectangle2D.OUT_BOTTOM));

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

    harness.check(r.outcode(5.0, 15.0) == Rectangle2D.OUT_BOTTOM);    
    harness.check(r.outcode(-5.0, -5.0) == (Rectangle2D.OUT_LEFT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, -5.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, 15.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_BOTTOM));    
    harness.check(r.outcode(-5.0, 15.0) == (Rectangle2D.OUT_LEFT 
            | Rectangle2D.OUT_BOTTOM));   
   
    // check an empty rectangle - all points should be outside

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, -5.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_TOP));    
    harness.check(r.outcode(15.0, 15.0) == (Rectangle2D.OUT_RIGHT 
            | Rectangle2D.OUT_BOTTOM));    
    harness.check(r.outcode(-5.0, 15.0) == (Rectangle2D.OUT_LEFT 
            | Rectangle2D.OUT_BOTTOM));   
   
    // check an empty rectangle - all points should be outside
    r = new Rectangle2D.Double(0.0, 0.0, 0.0, 0.0);
    int outside = Rectangle2D.OUT_LEFT | Rectangle2D.OUT_RIGHT

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

   
    // check an empty rectangle - all points should be outside
    r = new Rectangle2D.Double(0.0, 0.0, 0.0, 0.0);
    int outside = Rectangle2D.OUT_LEFT | Rectangle2D.OUT_RIGHT 
      | Rectangle2D.OUT_TOP | Rectangle2D.OUT_BOTTOM;
    harness.check(r.outcode(-1.0, -1.0) == outside);
    harness.check(r.outcode(-1.0, 0.0) == outside);
    harness.check(r.outcode(-1.0, 1.0) == outside);
    harness.check(r.outcode(0.0, -1.0) == outside);
    harness.check(r.outcode(0.0, 0.0) == outside);
    harness.check(r.outcode(0.0, 1.0) == outside);

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

    // check an empty rectangle - all points should be outside
    r = new Rectangle2D.Double(0.0, 0.0, 0.0, 0.0);
    int outside = Rectangle2D.OUT_LEFT | Rectangle2D.OUT_RIGHT 
      | Rectangle2D.OUT_TOP | Rectangle2D.OUT_BOTTOM;
    harness.check(r.outcode(-1.0, -1.0) == outside);
    harness.check(r.outcode(-1.0, 0.0) == outside);
    harness.check(r.outcode(-1.0, 1.0) == outside);
    harness.check(r.outcode(0.0, -1.0) == outside);
    harness.check(r.outcode(0.0, 0.0) == outside);
    harness.check(r.outcode(0.0, 1.0) == outside);
    harness.check(r.outcode(1.0, -1.0) == outside);

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

    r = new Rectangle2D.Double(0.0, 0.0, 0.0, 0.0);
    int outside = Rectangle2D.OUT_LEFT | Rectangle2D.OUT_RIGHT 
      | Rectangle2D.OUT_TOP | Rectangle2D.OUT_BOTTOM;
    harness.check(r.outcode(-1.0, -1.0) == outside);
    harness.check(r.outcode(-1.0, 0.0) == outside);
    harness.check(r.outcode(-1.0, 1.0) == outside);
    harness.check(r.outcode(0.0, -1.0) == outside);
    harness.check(r.outcode(0.0, 0.0) == outside);
    harness.check(r.outcode(0.0, 1.0) == outside);
    harness.check(r.outcode(1.0, -1.0) == outside);
    harness.check(r.outcode(1.0, 0.0) == outside);

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

    int outside = Rectangle2D.OUT_LEFT | Rectangle2D.OUT_RIGHT 
      | Rectangle2D.OUT_TOP | Rectangle2D.OUT_BOTTOM;
    harness.check(r.outcode(-1.0, -1.0) == outside);
    harness.check(r.outcode(-1.0, 0.0) == outside);
    harness.check(r.outcode(-1.0, 1.0) == outside);
    harness.check(r.outcode(0.0, -1.0) == outside);
    harness.check(r.outcode(0.0, 0.0) == outside);
    harness.check(r.outcode(0.0, 1.0) == outside);
    harness.check(r.outcode(1.0, -1.0) == outside);
    harness.check(r.outcode(1.0, 0.0) == outside);
    harness.check(r.outcode(1.0, 1.0) == outside);

View Full Code Here

Examples of java.awt.geom.Rectangle2D.outcode()

      | Rectangle2D.OUT_TOP | Rectangle2D.OUT_BOTTOM;
    harness.check(r.outcode(-1.0, -1.0) == outside);
    harness.check(r.outcode(-1.0, 0.0) == outside);
    harness.check(r.outcode(-1.0, 1.0) == outside);
    harness.check(r.outcode(0.0, -1.0) == outside);
    harness.check(r.outcode(0.0, 0.0) == outside);
    harness.check(r.outcode(0.0, 1.0) == outside);
    harness.check(r.outcode(1.0, -1.0) == outside);
    harness.check(r.outcode(1.0, 0.0) == outside);
    harness.check(r.outcode(1.0, 1.0) == outside);

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.