List of control() Examples

Examples of control()

erjang.EInternalPort.control()
@param caller @param op @param cmd @return @throws Pausable
org.apache.jackrabbit.vault.vlt.VltDirectory.control()
org.eclipse.jetty.spdy.generator.Generator.control()
org.eclipse.sapphire.ui.assist.internal.PropertyEditorAssistDecorator.control()
org.ggf.drmaa.Session.control()
Hold, release, suspend, resume, or kill the job identified by jobId. If jobId is JOB_IDS_SESSION_ALL, then this routine acts on all jobs submitted during this DRMAA session up to the moment control() is called. To avoid thread races conditions in multithreaded applications, the DRMAA implementation user should explicitly synchronize this call with any other job submission or control calls that may change the number of remote jobs.

The legal values for action and their meanings are:
- SUSPEND: stop the job,
- RESUME: (re)start the job,
- HOLD: put the job on-hold,
- RELEASE: release the hold on the job, and
- TERMINATE: kill the job.
This method returns once the action has been acknowledged by the DRM system, but it does not necessarily wait until the action has been completed.

Some DRMAA implementations may allow this method to be used to control jobs submitted external to the DRMAA session, such as jobs submitted by other DRMAA sessions or jobs submitted via native utilities.

If jobId is JOB_IDS_SESSION_ALL and the control action fails for one or more jobs, and InternalException will be thrown, and the state of the jobs in the session will be undefined.
@param jobId The id of the job to control @param action the control action to be taken @throws DrmaaException May be one of the following:
- ResumeInconsistentStateException -- an attempt was made to resume a job that was not is a suspended state
- SuspendInconsistentStateException -- an attempt was made to suspend a job that was not is a running state
- HoldInconsistentStateException -- an attempt was made to hold a job that was not is a pending state
- ReleaseInconsistentStateException -- an attempt was made to release a job that was not is a held state
- InvalidJobException -- the job identifier does not refer to an active job
- NoActiveSessionException -- the session has not yet been initialized or has already been exited
- DrmCommunicationException -- the DRMAA implementation was unable to contact the DRM
- AuthorizationException -- the executing user does not have sufficient permissions to execute the desired action
- IllegalArgumentException -- an argument is invalid
- InternalException -- an error has occured in the DRMAA implementation

Examples of org.eclipse.jetty.spdy.generator.Generator.control()


    private ByteBuffer createHeadersFrameBuffer(Fields headers)
    {
        HeadersFrame frame1 = new HeadersFrame(SPDY.V2, flags, streamId, headers);
        Generator generator = new Generator(new MappedByteBufferPool(), new StandardCompressionFactory().newCompressor());
        ByteBuffer buffer = generator.control(frame1);
        assertThat("Buffer is not null", buffer, notNullValue());
        return buffer;
    }


    @Test

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()

        Fields headers = new Fields();
        headers.put("a", "b");
        headers.put("c", "d");
        SynStreamFrame frame1 = new SynStreamFrame(SPDY.V2, flags, streamId, associatedStreamId, priority, slot, headers);
        Generator generator = new Generator(new MappedByteBufferPool(), new StandardCompressionFactory().newCompressor());
        ByteBuffer buffer = generator.control(frame1);


        Assert.assertNotNull(buffer);


        TestSPDYParserListener listener = new TestSPDYParserListener();
        Parser parser = new Parser(new StandardCompressionFactory().newDecompressor());

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()

        Fields headers = new Fields();
        headers.put("a", "b");
        headers.put("c", "d");
        SynStreamFrame frame1 = new SynStreamFrame(SPDY.V2, flags, streamId, associatedStreamId, priority, slot, headers);
        Generator generator = new Generator(new MappedByteBufferPool(), new StandardCompressionFactory().newCompressor());
        ByteBuffer buffer = generator.control(frame1);


        Assert.assertNotNull(buffer);


        TestSPDYParserListener listener = new TestSPDYParserListener();
        Parser parser = new Parser(new StandardCompressionFactory().newDecompressor());

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()

        }/*TODO, flowControl*/);


        final SocketChannel channel = SocketChannel.open(serverAddress);
        final Generator generator = new Generator(new MappedByteBufferPool(), new StandardCompressionFactory.StandardCompressor());
        int streamId = 1;
        ByteBuffer writeBuffer = generator.control(new SynStreamFrame(version, (byte)0, streamId, 0, (byte)0, (short)0, new Fields()));
        channel.write(writeBuffer);
        assertThat("writeBuffer is fully written", writeBuffer.hasRemaining(), is(false));


        final Parser parser = new Parser(new StandardCompressionFactory.StandardDecompressor());
        parser.addListener(new Listener.Adapter()

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()

            public void onControlFrame(ControlFrame frame)
            {
                if (frame instanceof SynStreamFrame)
                {
                    int pushStreamId = ((SynStreamFrame)frame).getStreamId();
                    ByteBuffer writeBuffer = generator.control(new RstStreamFrame(version, pushStreamId, StreamStatus.CANCEL_STREAM.getCode(version)));
                    try
                    {
                        channel.write(writeBuffer);
                    }
                    catch (IOException e)

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()

                    allDataFramesReceivedLatch.countDown();
                    return;
                }
                if (flowControl)
                {
                    ByteBuffer writeBuffer = generator.control(new WindowUpdateFrame(version, frame.getStreamId(), frame.getLength()));
                    try
                    {
                        channel.write(writeBuffer);
                    }
                    catch (IOException e)

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()


        assertThat("no unexpected exceptions occurred", unexpectedExceptionOccurred.get(), is(false));
        assertThat("not all dataframes have been received as the pushstream has been reset by the client.", allDataFramesReceivedLatch.await(streamId, TimeUnit.SECONDS), is(false));




        ByteBuffer buffer = generator.control(new GoAwayFrame(version, streamId, SessionStatus.OK.getCode()));
        channel.write(buffer);
        Assert.assertThat(buffer.hasRemaining(), is(false));


        assertThat("GoAway frame is received by server", goAwayReceivedLatch.await(5, TimeUnit.SECONDS), is(true));
        channel.shutdownOutput();

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()

        Certificate[] certificates = new Certificate[temp.length * 2];
        System.arraycopy(temp, 0, certificates, 0, temp.length);
        System.arraycopy(temp, 0, certificates, temp.length, temp.length);
        CredentialFrame frame1 = new CredentialFrame(SPDY.V3, slot, proof, certificates);
        Generator generator = new Generator(new MappedByteBufferPool(), new StandardCompressionFactory().newCompressor());
        ByteBuffer buffer = generator.control(frame1);


        Assert.assertNotNull(buffer);


        TestSPDYParserListener listener = new TestSPDYParserListener();
        Parser parser = new Parser(new StandardCompressionFactory().newDecompressor());

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()

        short slot = 1;
        byte[] proof = new byte[]{0, 1, 2};
        Certificate[] certificates = loadCertificates();
        CredentialFrame frame1 = new CredentialFrame(SPDY.V3, slot, proof, certificates);
        Generator generator = new Generator(new MappedByteBufferPool(), new StandardCompressionFactory().newCompressor());
        ByteBuffer buffer = generator.control(frame1);


        Assert.assertNotNull(buffer);


        TestSPDYParserListener listener = new TestSPDYParserListener();
        Parser parser = new Parser(new StandardCompressionFactory().newDecompressor());

View Full Code Here

Examples of org.eclipse.jetty.spdy.generator.Generator.control()

    @Test
    public void testGenerateParse() throws Exception
    {
        NoOpFrame frame1 = new NoOpFrame();
        Generator generator = new Generator(new MappedByteBufferPool(), new StandardCompressionFactory().newCompressor());
        ByteBuffer buffer = generator.control(frame1);


        Assert.assertNotNull(buffer);


        TestSPDYParserListener listener = new TestSPDYParserListener();
        Parser parser = new Parser(new StandardCompressionFactory().newDecompressor());

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.