Examples of ValueModel

DisplayProject.binding.value.ValueModel
Describes models with a generic access to a single value that allow to observe value changes. The value can be accessed using the #getValue()/#setValue(Object) methods. Observers can register instances of PropertyChangeListener to be notified if the value changes.
If the value is read-only or write-only, an implementor may choose to reject an operation using an UnsupportedOperationException or may do nothing or perform an appropriate action, or may return an appropriate value.
The listeners registered with this ValueModel using #addValueChangeListener will be invoked only with PropertyChangeEvents that have the name set to "value". In other words, the listeners won't get notified when a PropertyChangeEvent is fired that has a null object as the name to indicate an arbitrary set of the event source's properties have changed. This is the case if you use the PropertyChangeSupport, either directly or indirectly, to fire property changes with the property name "value" specified. This constraint ensures that all ValueModel implementors behave like the AbstractValueModel subclasses. In the rare case, where you want to notify a PropertyChangeListener even with PropertyChangeEvents that have no property name set, you can register the listener with #addPropertyChangeListener, not #addValueChangeListener.
AbstractValueModel minimizes the effort required to implement this interface. It uses the PropertyChangeSupport to fire PropertyChangeEvents, and it adds PropertyChangeListeners for the specific property name "value". This ensures that the constraint mentioned above is met.
Implementors are encouraged to provide non-null values for the PropertyChangeEvent's old and new values. However, both may be null. @author Karsten Lentzsch @version $Revision: 1.8 $ @see AbstractValueModel @see ValueHolder @see DisplayProject.binding.beans.PropertyAdapter Copyright (c) 2002-2005 JGoodies Karsten Lentzsch. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: o Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. o Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. o Neither the name of JGoodies Karsten Lentzsch nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
asia.redact.bracket.properties.ValueModel
As of version 1.3.2, ValueModel is an interface. @author Dave @see BasicValueModel @see ImmutableValueModel
com.jgoodies.binding.value.ValueModel
net.helipilot50.stocktrade.displayproject.binding.value.ValueModel
Describes models with a generic access to a single value that allow to observe value changes. The value can be accessed using the #getValue()/#setValue(Object) methods. Observers can register instances of PropertyChangeListener to be notified if the value changes.
If the value is read-only or write-only, an implementor may choose to reject an operation using an UnsupportedOperationException or may do nothing or perform an appropriate action, or may return an appropriate value.
The listeners registered with this ValueModel using #addValueChangeListener will be invoked only with PropertyChangeEvents that have the name set to "value". In other words, the listeners won't get notified when a PropertyChangeEvent is fired that has a null object as the name to indicate an arbitrary set of the event source's properties have changed. This is the case if you use the PropertyChangeSupport, either directly or indirectly, to fire property changes with the property name "value" specified. This constraint ensures that all ValueModel implementors behave like the AbstractValueModel subclasses. In the rare case, where you want to notify a PropertyChangeListener even with PropertyChangeEvents that have no property name set, you can register the listener with #addPropertyChangeListener, not #addValueChangeListener.
AbstractValueModel minimizes the effort required to implement this interface. It uses the PropertyChangeSupport to fire PropertyChangeEvents, and it adds PropertyChangeListeners for the specific property name "value". This ensures that the constraint mentioned above is met.
Implementors are encouraged to provide non-null values for the PropertyChangeEvent's old and new values. However, both may be null. @author Karsten Lentzsch @version $Revision: 1.8 $ @see AbstractValueModel @see ValueHolder @see net.helipilot50.stocktrade.displayproject.binding.beans.PropertyAdapter Copyright (c) 2002-2005 JGoodies Karsten Lentzsch. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: o Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. o Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. o Neither the name of JGoodies Karsten Lentzsch nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
org.apache.isis.viewer.wicket.model.models.ValueModel
Represents a standalone value.
org.qi4j.runtime.value.ValueModel
Model for ValueComposites
org.springframework.binding.value.ValueModel
Describes models with a generic access to a single value that allow to observe value changes. The value can be accessed using the #getValue()/#setValue(Object)/ #setValueSilently(Object, PropertyChangeListener) methods. Observers can register instances of PropertyChangeListener to be notified if the value changes.
The listeners registered with this ValueModel using #addValueChangeListener will be invoked only with PropertyChangeEvents that have the name set to "value".
AbstractValueModel minimizes the effort required to implement this interface. It uses the PropertyChangeSupport to fire PropertyChangeEvents, and it adds PropertyChangeListeners for the specific property name "value". This ensures that the constraint mentioned above is met. @see org.springframework.binding.value.support.AbstractValueModel @author Karsten Lentzsch @author Keith Donald @author Oliver Hutchison

Examples of DisplayProject.binding.value.ValueModel

     */
    public void setTriggerChannel(ValueModel newTriggerChannel) {
        if (newTriggerChannel == null)
            throw new NullPointerException("The trigger channel must not be null.");


        ValueModel oldTriggerChannel = getTriggerChannel();
        triggerChannel = newTriggerChannel;


        for (Iterator<WrappedBuffer> iter = wrappedBuffers.values().iterator(); iter.hasNext();) {
            WrappedBuffer wrappedBuffer = iter.next();
            wrappedBuffer.buffer.setTriggerChannel(triggerChannel);

View Full Code Here

Examples of DisplayProject.binding.value.ValueModel

      }
      else if (list.getSelectionHolder() == null) {
        requiresDefault = true;
      }
      else {
        ValueModel model = list.getSelectionHolder();
        if (model instanceof TypeAwareValueModel) {
          if (DataValue.class.isAssignableFrom(((TypeAwareValueModel)model).getValueType())) {
            requiresDefault = false;
          }
          else {
            requiresDefault = true;
          }
        }
        else {
          requiresDefault = (model.getValue() == null);
        }
      }
      if (requiresDefault) {
        // TF:05/11/2008:Fixed this up so it actually sets the underlying model
        getSelectionModel().setSelectionInterval(0, 0);

View Full Code Here

Examples of DisplayProject.binding.value.ValueModel

     */
    public void setListHolder(ValueModel newListHolder) {
        if (newListHolder == null) 
            throw new NullPointerException("The new list holder must not be null.");


        ValueModel oldListHolder = getListHolder();
        if (equals(oldListHolder, newListHolder))
            return;


        Object oldList = list;
        Object newList = newListHolder.getValue();


        oldListHolder.removeValueChangeListener(listChangeHandler);
        listHolder = newListHolder;
        newListHolder.addValueChangeListener(listChangeHandler);


        updateList(oldList, newList);
        firePropertyChange(PROPERTYNAME_LIST_HOLDER,

View Full Code Here

Examples of DisplayProject.binding.value.ValueModel

     */
    public void setSelectionHolder(ValueModel newSelectionHolder) {
        if (newSelectionHolder == null) 
            throw new NullPointerException("The new selection holder must not be null.");


        ValueModel oldSelectionHolder = getSelectionHolder();
        if (equals(oldSelectionHolder, newSelectionHolder))
            return;


        oldSelectionHolder.removeValueChangeListener(selectionChangeHandler);
        selectionHolder = newSelectionHolder;
        oldSelection = newSelectionHolder.getValue();
        newSelectionHolder.addValueChangeListener(selectionChangeHandler);
        firePropertyChange(PROPERTYNAME_SELECTION_HOLDER, 
                            oldSelectionHolder,

View Full Code Here

Examples of DisplayProject.binding.value.ValueModel

            throw new NullPointerException("The new selection index holder must not be null.");


        if (newSelectionIndexHolder.getValue() == null)
            throw new UsageException("The value of the new selection index holder must not be null.");


        ValueModel oldSelectionIndexHolder = getSelectionIndexHolder();
        if (equals(oldSelectionIndexHolder, newSelectionIndexHolder))
            return;


        oldSelectionIndexHolder.removeValueChangeListener(selectionIndexChangeHandler);
        selectionIndexHolder = newSelectionIndexHolder;
        newSelectionIndexHolder.addValueChangeListener(selectionIndexChangeHandler);
        oldSelectionIndex = getSelectionIndex();
        oldSelection = getSafeElementAt(oldSelectionIndex);
        firePropertyChange(PROPERTYNAME_SELECTION_INDEX_HOLDER,

View Full Code Here

Examples of DisplayProject.binding.value.ValueModel

     */
    public void setTriggerChannel(ValueModel newTriggerChannel) {
        if (newTriggerChannel == null)
            throw new NullPointerException("The trigger channel must not be null.");


        ValueModel oldTriggerChannel = getTriggerChannel();
        triggerChannel = newTriggerChannel;


        for (Iterator<WrappedBuffer> iter = wrappedBuffers.values().iterator(); iter.hasNext();) {
            WrappedBuffer wrappedBuffer = iter.next();
            wrappedBuffer.buffer.setTriggerChannel(triggerChannel);

View Full Code Here

Examples of DisplayProject.binding.value.ValueModel

            Document document,
            boolean commitOnFocusLost) {
        if (valueModel == null)
            throw new NullPointerException("The value model must not be null.");


        ValueModel textModel = commitOnFocusLost
            ? createCommitOnFocusLostModel(valueModel, textComponent)
            : valueModel;
        boolean filterNewlines = textComponent instanceof JTextField;
        textComponent.setDocument(
                new DocumentAdapter(textModel, document, filterNewlines));

View Full Code Here

Examples of asia.redact.bracket.properties.ValueModel

      else{
        if(key.contains(baseKey)){
          key = key.substring(baseKey.length(), key.length());
        }
      }
      ValueModel model = e.getValue();
      writer.append(format.format(key, model.getSeparator(),model.getValues(),model.getComments()));
    }
    
    writer.append(format.formatFooter());
  }

View Full Code Here

Examples of com.jgoodies.binding.value.ValueModel

        comboBoxAssemblyTeam = new JComboBox(new ComboBoxAdapter(viewHandler
                .getSupplierList(null), presentationModel
                .getModel(AssemblyModel.PROPERTY_SUPPLIER)));
        comboBoxAssemblyTeam.setName("AssemblyTeam");


        ValueModel yearModel = presentationModel
                .getModel(AssemblyModel.PROPERTY_ASSEMBLY_YEAR);


        yearChooser = new JYearChooser();
        yearChooser.setName("AssemblyYear");

View Full Code Here

Examples of com.jgoodies.binding.value.ValueModel

    textFieldCustomerLastName.setName("CustomerLastName");
    orderViewHandler.addEditComponent(textFieldCustomerLastName);
  }


  private void createAssemblyFields() {
    ValueModel yearModel = presentationModel
        .getBufferedModel(OrderModel.PROPERTY_ASSEMBLY_YEAR);


    yearChooser = new JYearChooser();


    yearChooser.setName("AssemblyYear");

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.