Examples of RemoteEvent

net.jini.core.event.RemoteEvent
The base class or superclass for remote events.
The abstract state contained in a RemoteEvent object includes a reference to the object in which the event occurred, a long which identifies the kind of event relative to the object in which the event occurred, a long which indicates the sequence number of this instance of the event kind, and a MarshalledObject that is to be handed back when the notification occurs. The combination of the event identifier and the object reference obtained from the RemoteEvent object should uniquely identify the event type.
The sequence number obtained from the RemoteEvent object is an increasing value that can act as a hint to the number of occurrences of this event relative to some earlier sequence number. Any object that generates a RemoteEvent is required to insure that for any two RemoteEvent objects with the same event identifier, the sequence number of those events differ if and only if the RemoteEvent objects are a response to different events. This guarantee is required to allow notification calls to be idempotent. A further guarantee is that if two RemoteEvents, x and y, come from the same source and have the same event identifier, then x occurred before y if and only if the sequence number of x is lower than the sequence number of y.
A stronger guarantee is possible for those generators of RemoteEvents that can support it. This guarantee states that not only do sequence numbers increase, but they are not skipped. In such a case, if RemoteEvent x and y have the same source and the same event identifier, and x has sequence number m and y has sequence number n, then if m < n there were exactly n-m-1 events of the same event type between the event that triggered x and the event that triggered y. Such sequence numbers are said to be "fully ordered".
An event registration that occurs within a transaction is considered to be scoped by that transaction. This means that any occurrence of the kind of event of interest that happens as part of the transaction will cause a notification to be sent to the recipients indicated by the registration that occurred in the transaction. Such events must have a separate event identifier to allow third-party store and forward entities to distinguish between an event that happens within a transaction and those that happen outside of the transaction. Notifications of these events will not be sent to entities that registered interest in this kind of event outside the scope of the transaction until and unless the transaction is committed.
Because of this, notifications sent from inside a transaction will have a different sequence number than the notifications of the same events would have outside of the transaction. Within a transaction, all RemoteEvent objects for a given kind of event are given a sequence number relative to the transaction. This is true even if the event that triggered the RemoteEvent object being sent occurs outside of the scope of the transaction (but is visible within the transaction). @author Sun Microsystems, Inc. @since 1.0
org.openengsb.core.workflow.api.model.RemoteEvent

Examples of net.jini.core.event.RemoteEvent

        t.start();
        
        // Get events and verify
  logger.log(Level.INFO, "Getting events from empty mailbox.");
        RemoteEventIterator rei = mr.getRemoteEvents();
        RemoteEvent rei_event;
        Date before = new Date();
  logger.log(Level.INFO, "Calling next() on empty set @ {0}", before);        
        try {
            rei_event = rei.next(REG_LEASE_WAIT);
            throw new TestException("Successfully called next on expired reg.");

View Full Code Here

Examples of net.jini.core.event.RemoteEvent

        public void run() {
            try {
                 // Get events and verify
                logger.log(Level.INFO, "Getting events from empty mailbox.");
                RemoteEventIterator rei = reg.getRemoteEvents();
                RemoteEvent rei_event = null;
                Date before = new Date();
                logger.log(Level.INFO, "Calling next() on empty set @ {0}", before);        
                try {
                    rei_event = rei.next(MAX_WAIT_GET_EVENT);
                    throw new TestException("Did not receive expected exception");

View Full Code Here

Examples of net.jini.core.event.RemoteEvent

            throw new TestException("Got bad events from iterator " + events);
        }
  logger.log(Level.INFO, "Event iterator was empty -- OK");


        RemoteEvent[] goodEvents = new RemoteEvent[] {
            new RemoteEvent(src, id, seqNum++, hbk),
            new RemoteEvent(src, id, seqNum++, hbk),
            new RemoteEvent(src, id, seqNum++, hbk),
            new RemoteEvent(src, id, seqNum++, hbk),
            new RemoteEvent(src, id, seqNum++, hbk),
            new RemoteEvent(src, id, seqNum++, hbk),
        };


        goodPullCount = goodEvents.length;


  logger.log(Level.INFO, "Sending " + goodEvents.length + " good events ...");
  for (i = 0; i < goodEvents.length; i++) {
      mbRel.notify(goodEvents[i]);
  }
        
        events = goodPullListener.getRemoteEvents(mr);
        if (events.size() != goodPullCount) {
            throw new TestException(
                "Got " + events.size() + " + events, but expected " +
                goodPullCount + ":" + events);
        }
  logger.log(Level.INFO, "Event iterator was not empty -- OK");     
        
        RemoteEvent[] mixedEvents = new RemoteEvent[] {
            new MyLocalRemoteEvent(src, id, seqNum++, hbk),
            new RemoteEvent(src, id, seqNum++, hbk),
            new MyLocalRemoteEvent(src, id, seqNum++, hbk),
            new RemoteEvent(src, id, seqNum++, hbk),
            new MyLocalRemoteEvent(src, id, seqNum++, hbk),
            new RemoteEvent(src, id, seqNum++, hbk),
        };
  logger.log(Level.INFO, "Sending " + mixedEvents.length + " mixed events ...");
  for (i = 0; i < mixedEvents.length; i++) {
      mbRel.notify(mixedEvents[i]);
  }

View Full Code Here

Examples of net.jini.core.event.RemoteEvent

  //System.out.println("RemoteEventHandle: equals:");


  if (!(obj instanceof RemoteEventHandle))
      return false;


  RemoteEvent other = ((RemoteEventHandle) obj).getRemoteEvent();


  Object tmpSrc = other.getSource();
  Object thisSrc = event.getSource();
  long tmpID = other.getID();
  long thisID = event.getID();
  long tmpSeq = other.getSequenceNumber();
  long thisSeq = event.getSequenceNumber();
  MarshalledObject tmpObj = other.getRegistrationObject();
  MarshalledObject thisObj = event.getRegistrationObject();


  if (!thisSrc.equals(tmpSrc)) {
      //System.out.println("RemoteEventHandle: equals: " +
      //  "event source not equal");

View Full Code Here

Examples of net.jini.core.event.RemoteEvent

  TestListener badRel = TestUtils.createUEListener(manager);
  int goodRelCount = 0, badRelCount = 0;


  // Generate some events from both generators
  logger.log(Level.INFO, "Generating some events");
  RemoteEvent event = myGen.generateEvent(evtReg.getID(), 2);
  RemoteEvent event2 = myGen2.generateEvent(evtReg2.getID(), 2);
  goodRelCount += 2;


  RemoteEvent[] bogus = {
      new RemoteEvent(myGen, 9999, 9999, null),
      new RemoteEvent(myGen2, 1234, 1, null),
  };


  // Enable the first of our listener objects
  assertCount(goodRel, 0);
  logger.log(Level.INFO, "Enabling delivery to our REL" + goodRel);

View Full Code Here

Examples of net.jini.core.event.RemoteEvent

  checkLease(tgl2, DURATION1); 
        
        // Get events and verify
  logger.log(Level.INFO, "Getting events from empty mailbox.");
        RemoteEventIterator rei = mr.getRemoteEvents();
        RemoteEvent rei_event;
        Date before = new Date();
  logger.log(Level.INFO, "Calling next() on empty set @ {0}", before);        
        rei_event = rei.next(MAX_WAIT_GET_EVENT);
        Date after = new Date();
  logger.log(Level.INFO, "Returned from next() @ {0}", after);

View Full Code Here

Examples of net.jini.core.event.RemoteEvent

  for (i = 0; i < NUM_EVENTS; i++) {
      events[i] = myGen.generateEvent(evtReg.getID(), 3);
  }


  RemoteEvent[] bogus = {
      new RemoteEvent(myGen, 9999, 9999, null),
      new RemoteEvent(myGen, 5678, 1234, null),
  };


  // 
  // Kill event mailbox service
  //
  logger.log(Level.INFO, "Killing mailbox service ...");
  shutdown(0);


  goodCount = NUM_EVENTS;
  logger.log(Level.INFO, "Getting events after service recovery. Expect " + goodCount);
        getCollectedRemoteEvents(goodListener, mr,goodCount, MAX_WAIT);
  logger.log(Level.INFO, "Asserting event count");
  assertCount(goodListener, goodCount);
  logger.log(Level.INFO, "Verifying events");
  assertEvents(goodListener, events);
  
  // 
  // Kill event mailbox service
  //
  shutdown(0);


        // Won't be using recovered listener, but still want to exercise
  // recovery logic with a "pull" registration.
  logger.log(Level.INFO, "Generating another event");
  RemoteEvent re = myGen.generateEvent(evtReg.getID(), 3);
  goodCount++;
  logger.log(Level.INFO, "Getting events. Expecting " + goodCount);
        getCollectedRemoteEvents(goodListener, mr, goodCount, MAX_WAIT);
  logger.log(Level.INFO, "Asserting event count");
  assertCount(goodListener, goodCount);

View Full Code Here

Examples of net.jini.core.event.RemoteEvent

          "Registration has been removed ... not sending event");
      return null;
  }


  RemoteEventListener listener = reg.getListener();
  RemoteEvent event =
      new RemoteEvent(serverStub, reg.getID(), reg.getSequenceNumber(),
          reg.getHandback());
  boolean sent = false;
  while (!sent) {
      try {
          listener.notify(event);

View Full Code Here

Examples of net.jini.core.event.RemoteEvent


  // Wrap event into a handle
  RemoteEventHandle key = new RemoteEventHandle(theEvent);


        // See if we already have the handle
  RemoteEvent incoming = (RemoteEvent) events.get(key);


        String s = (incoming ==null) ? "not found" : "found";
  System.out.println("Desired event was " + s + ": " + key);
  System.out.println("Events are:" + events.toString());

View Full Code Here

Examples of net.jini.core.event.RemoteEvent

        if (client != null) {
      if (context == null) {
    client.notify(theEvent);
      } else {
    try {
        final RemoteEvent ev = theEvent;
        Subject.doAs(context.getSubject(),
         new PrivilegedExceptionAction() {
           public Object run() throws UnknownEventException, RemoteException {
               client.notify(ev);
               return null;

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.