Examples of NioClientSocketChannelFactory

com.facebook.presto.jdbc.internal.netty.channel.socket.nio.NioClientSocketChannelFactory
A {@link ClientSocketChannelFactory} which creates a client-side NIO-based{@link SocketChannel}. It utilizes the non-blocking I/O mode which was introduced with NIO to serve many number of concurrent connections efficiently.
How threads work

There are two types of threads in a {@link NioClientSocketChannelFactory}; one is boss thread and the other is worker thread.
Boss thread

One {@link NioClientSocketChannelFactory} has one boss thread. It makesa connection attempt on request. Once a connection attempt succeeds, the boss thread passes the connected {@link Channel} to one of the workerthreads that the {@link NioClientSocketChannelFactory} manages.
Worker threads

One {@link NioClientSocketChannelFactory} can have one or more workerthreads. A worker thread performs non-blocking read and write for one or more {@link Channel}s in a non-blocking mode.
Life cycle of threads and graceful shutdown

All threads are acquired from the {@link Executor}s which were specified when a {@link NioClientSocketChannelFactory} was created. A boss thread isacquired from the {@code bossExecutor}, and worker threads are acquired from the {@code workerExecutor}. Therefore, you should make sure the specified {@link Executor}s are able to lend the sufficient number of threads. It is the best bet to specify {@linkplain Executors#newCachedThreadPool() a cached thread pool}.
Both boss and worker threads are acquired lazily, and then released when there's nothing left to process. All the related resources such as {@link Selector} are also released when the boss and worker threads arereleased. Therefore, to shut down a service gracefully, you should do the following:
1. close all channels created by the factory usually using {@link ChannelGroup#close()}, and
2. call {@link #releaseExternalResources()}.
Please make sure not to shut down the executor until all channels are closed. Otherwise, you will end up with a {@link RejectedExecutionException}and the related resources might not be released properly. @apiviz.landmark
io.netty.channel.socket.nio.NioClientSocketChannelFactory
A {@link ClientSocketChannelFactory} which creates a client-side NIO-based{@link SocketChannel}. It utilizes the non-blocking I/O mode which was introduced with NIO to serve many number of concurrent connections efficiently.
How threads work

There are two types of threads in a {@link NioClientSocketChannelFactory}; one is boss thread and the other is worker thread.
Boss thread

One {@link NioClientSocketChannelFactory} has one boss thread. It makesa connection attempt on request. Once a connection attempt succeeds, the boss thread passes the connected {@link Channel} to one of the workerthreads that the {@link NioClientSocketChannelFactory} manages.
Worker threads

One {@link NioClientSocketChannelFactory} can have one or more workerthreads. A worker thread performs non-blocking read and write for one or more {@link Channel}s in a non-blocking mode.
Life cycle of threads and graceful shutdown

All threads are acquired from the {@link Executor}s which were specified when a {@link NioClientSocketChannelFactory} was created. A boss thread isacquired from the {@code bossExecutor}, and worker threads are acquired from the {@code workerExecutor}. Therefore, you should make sure the specified {@link Executor}s are able to lend the sufficient number of threads. It is the best bet to specify {@linkplain Executors#newCachedThreadPool() a cached thread pool}.
Both boss and worker threads are acquired lazily, and then released when there's nothing left to process. All the related resources such as {@link Selector} are also released when the boss and worker threads arereleased. Therefore, to shut down a service gracefully, you should do the following:
1. close all channels created by the factory usually using {@link ChannelGroup#close()}, and
2. call {@link #releaseExternalResources()}.
Please make sure not to shut down the executor until all channels are closed. Otherwise, you will end up with a {@link RejectedExecutionException}and the related resources might not be released properly. @apiviz.landmark
org.elasticsearch.common.netty.channel.socket.nio.NioClientSocketChannelFactory
org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory
A {@link ClientSocketChannelFactory} which creates a client-side NIO-based{@link SocketChannel}. It utilizes the non-blocking I/O mode which was introduced with NIO to serve many number of concurrent connections efficiently.
How threads work

There are two types of threads in a {@link NioClientSocketChannelFactory}; one is boss thread and the other is worker thread.
Boss thread

One {@link NioClientSocketChannelFactory} has one boss thread. It makesa connection attempt on request. Once a connection attempt succeeds, the boss thread passes the connected {@link Channel} to one of the workerthreads that the {@link NioClientSocketChannelFactory} manages.
Worker threads

One {@link NioClientSocketChannelFactory} can have one or more workerthreads. A worker thread performs non-blocking read and write for one or more {@link Channel}s in a non-blocking mode.
Life cycle of threads and graceful shutdown

All threads are acquired from the {@link Executor}s which were specified when a {@link NioClientSocketChannelFactory} was created. A boss thread isacquired from the {@code bossExecutor}, and worker threads are acquired from the {@code workerExecutor}. Therefore, you should make sure the specified {@link Executor}s are able to lend the sufficient number of threads. It is the best bet to specify {@linkplain Executors#newCachedThreadPool() a cached thread pool}.
Both boss and worker threads are acquired lazily, and then released when there's nothing left to process. All the related resources such as {@link Selector} are also released when the boss and worker threads arereleased. Therefore, to shut down a service gracefully, you should do the following:
1. close all channels created by the factory, and
2. call {@link #releaseExternalResources()}.
Please make sure not to shut down the executor until all channels are closed. Otherwise, you will end up with a {@link RejectedExecutionException}and the related resources might not be released properly. @author The Netty Project (netty-dev@lists.jboss.org) @author Trustin Lee (tlee@redhat.com) @version $Rev: 536 $, $Date: 2008-11-28 20:18:21 +0900 (Fri, 28 Nov 2008) $ @apiviz.landmark

Examples of com.facebook.presto.jdbc.internal.netty.channel.socket.nio.NioClientSocketChannelFactory

        String namePrefix = "http-client-" + name;


        // shared timer for channel factory and read timeout channel handler
        this.timer = new HashedWheelTimer(daemonThreadsNamed(namePrefix + "-timer-%s"));


        ChannelFactory channelFactory = new NioClientSocketChannelFactory(ioPool.getBossPool(), ioPool.getWorkerPool());


        ThreadFactory workerThreadFactory = daemonThreadsNamed(namePrefix + "-worker-%s");
        this.executor = new OrderedMemoryAwareThreadPoolExecutor(asyncConfig.getWorkerThreads(), 0, 0, 30, TimeUnit.SECONDS, workerThreadFactory);
        this.executorMBean = new ThreadPoolExecutorMBean(executor);

View Full Code Here

Examples of io.netty.channel.socket.nio.NioClientSocketChannelFactory


        boolean ssl = scheme.equalsIgnoreCase("https");


        // Configure the client.
        ClientBootstrap bootstrap = new ClientBootstrap(
                new NioClientSocketChannelFactory(
                        Executors.newCachedThreadPool(),
                        Executors.newCachedThreadPool()));


        // Set up the event pipeline factory.
        bootstrap.setPipelineFactory(new HttpSnoopClientPipelineFactory(ssl));

View Full Code Here

Examples of org.elasticsearch.common.netty.channel.socket.nio.NioClientSocketChannelFactory


        // Bind and start to accept incoming connections.
        serverBootstrap.bind(new InetSocketAddress(9000));


        ClientBootstrap clientBootstrap = new ClientBootstrap(
                new NioClientSocketChannelFactory(
                        Executors.newCachedThreadPool(),
                        Executors.newCachedThreadPool()));


//        ClientBootstrap clientBootstrap = new ClientBootstrap(
//                new OioClientSocketChannelFactory(Executors.newCachedThreadPool()));

View Full Code Here

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

     * @param port    Server port.
     */
    public RedisClient(String host, int port) {
        ExecutorService connectors = Executors.newFixedThreadPool(1);
        ExecutorService workers    = Executors.newCachedThreadPool();
        ClientSocketChannelFactory factory = new NioClientSocketChannelFactory(connectors, workers);


        InetSocketAddress addr = new InetSocketAddress(host, port);


        bootstrap = new ClientBootstrap(factory);
        bootstrap.setOption("remoteAddress", addr);

View Full Code Here

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

            throw new IllegalArgumentException("count must be a positive integer.");
        }


        // Configure the client.
        ClientBootstrap bootstrap = new ClientBootstrap(
                new NioClientSocketChannelFactory(
                        Executors.newCachedThreadPool(),
                        Executors.newCachedThreadPool()));


        // Set up the event pipeline factory.
        bootstrap.setPipelineFactory(new FactorialClientPipelineFactory(count));

View Full Code Here

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory


        boolean ssl = scheme.equalsIgnoreCase("https");


        // Configure the client.
        ClientBootstrap bootstrap = new ClientBootstrap(
                new NioClientSocketChannelFactory(
                        Executors.newCachedThreadPool(),
                        Executors.newCachedThreadPool()));


        // Set up the event pipeline factory.
        bootstrap.setPipelineFactory(new HttpClientPipelineFactory(ssl));

View Full Code Here

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

  
    final ExecutorService executor = Executors.newCachedThreadPool();


    // Configure the client.
    ClientBootstrap bootstrap = new ClientBootstrap(
            new NioClientSocketChannelFactory(
                executor,
                executor));


    bootstrap.setOption(
            "remoteAddress", new InetSocketAddress("localhost", 8080));

View Full Code Here

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

        }
      }
      else
      {
          ClientBootstrap bootstrap = new ClientBootstrap(
                  new NioClientSocketChannelFactory(
                      executor,
                      executor));
          
          HessianProxyFactory factory = new HessianProxyFactory(executor, host.getName()+":"+host.getPort());
          bootstrap.setPipelineFactory(

View Full Code Here

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

        }
      }
      else
      {
          ClientBootstrap bootstrap = new ClientBootstrap(
                  new NioClientSocketChannelFactory(
                      executor,
                      executor));
          
          HessianProxyFactory factory = new HessianProxyFactory(executor, host.getName()+":"+host.getPort());
          bootstrap.setPipelineFactory(

View Full Code Here

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

  {
    String host = args[0];
    int port = Integer.parseInt(args[1]);
    
    ChannelFactory factory =
            new NioClientSocketChannelFactory(
                    Executors.newCachedThreadPool(),
                    Executors.newCachedThreadPool());


        bootstrap = new ClientBootstrap(factory);
        bootstrap.setOption(

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.

Examples of NioClientSocketChannelFactory

How threads work

Boss thread

Worker threads

Life cycle of threads and graceful shutdown

How threads work

Boss thread

Worker threads

Life cycle of threads and graceful shutdown

How threads work

Boss thread

Worker threads

Life cycle of threads and graceful shutdown

Examples of com.facebook.presto.jdbc.internal.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of io.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of org.elasticsearch.common.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory

Examples of org.jboss.netty.channel.socket.nio.NioClientSocketChannelFactory