Examples of MP3File

com.dotmarketing.portlets.files.model.MP3File
@author rocco
com.mpatric.mp3agic.Mp3File
dnb.data.filetree.Mp3File

helliker.id3.MP3File

How is MP3 built?

Most people with a little knowledge in MP3 files know that the sound is divided into smaller parts and compressed with a psycoacoustic model. This smaller pieces of the audio is then put into something called 'frames', which is a little datablock with a header. I'll focus on that header in this text.

The header is 4 bytes, 32 bits, big and begins with something called sync. This sync is, at least according to the MPEG standard, 12 set bits in a row. Some add-on standards made later uses 11 set bits and one cleared bit. The sync is directly followed by a ID bit, indicating if the file is a MPEG-1 och MPEG-2 file. 0=MPEG-2 and 1=MPEG-1

The layer is defined with the two layers bits. They are oddly defined as

0 0	Not defined
0 1	Layer III
1 0	Layer II
1 1	Layer I

With this information and the information in the bitrate field we can determine the bitrate of the audio (in kbit/s) according to this table.

Bitrate value	MPEG-1, layer I	MPEG-1, layer II	MPEG-1, layer III	MPEG-2, layer I	MPEG-2, layer II	MPEG-2, layer III
0 0 0 0
0 0 0 1	32	32	32	32	32	8
0 0 1 0	64	48	40	64	48	16
0 0 1 1	96	56	48	96	56	24
0 1 0 0	128	64	56	128	64	32
0 1 0 1	160	80	64	160	80	64
0 1 1 0	192	96	80	192	96	80
0 1 1 1	224	112	96	224	112	56
1 0 0 0	256	128	112	256	128	64
1 0 0 1	288	160	128	288	160	128
1 0 1 0	320	192	160	320	192	160
1 0 1 1	352	224	192	352	224	112
1 1 0 0	384	256	224	384	256	128
1 1 0 1	416	320	256	416	320	256
1 1 1 0	448	384	320	448	384	320
1 1 1 1

The sample rate is described in the frequency field. These values is dependent of which MPEG standard is used according to the following table.

Frequency value	MPEG-1	MPEG-2
0 0	44100 Hz	22050 Hz
0 1	48000 Hz	24000 Hz
1 0	32000 Hz	16000 Hz
1 1

Three bits is not needed in the decoding process at all. These are the copyright bit, original home bit and the private bit. The copyright has the same meaning as the copyright bit on CDs and DAT tapes, i.e. telling that it is illegal to copy the contents if the bit is set. The original home bit indicates, if set, that the frame is located on its original media. No one seems to know what the privat bit is good for.

If the protection bit is NOT set then the frame header is followed by a 16 bit checksum, inserted before the audio data. If the padding bit is set then the frame is padded with an extra byte. Knowing this the size of the complete frame can be calculated with the following formula

FrameSize = 144 * BitRate / SampleRate
when the padding bit is cleared and

FrameSize = (144 * BitRate / SampleRate) + 1
when the padding bit is set.

The frameSize is of course an integer. If for an example BitRate=128000, SampleRate=44100 and the padding bit is cleared, then the FrameSize = 144 * 128000 / 44100 = 417

The mode field is used to tell which sort of stereo/mono encoding that has been used. The purpose of the mode extension field is different for different layers, but I really don't know exactly what it's for.

Mode value	mode
0 0	Stereo
0 1	Joint stereo
1 0	Dual channel
1 1	Mono

The last field is the emphasis field. It is used to sort of 're-equalize' the sound after a Dolby-like noise supression. This is not very used and will probably never be. The following noise supression model is used

Emphasis value	Emphasis method
0 0	none
0 1	50/15ms
1 0
1 1	CCITT j.17

@author Eric Farng @version $Revision: 1.5 $

org.blinkenlights.jid3.MP3File

How is MP3 built?

The layer is defined with the two layers bits. They are oddly defined as

0 0	Not defined
0 1	Layer III
1 0	Layer II
1 1	Layer I

With this information and the information in the bitrate field we can determine the bitrate of the audio (in kbit/s) according to this table.

Bitrate value	MPEG-1, layer I	MPEG-1, layer II	MPEG-1, layer III	MPEG-2, layer I	MPEG-2, layer II	MPEG-2, layer III
0 0 0 0
0 0 0 1	32	32	32	32	32	8
0 0 1 0	64	48	40	64	48	16
0 0 1 1	96	56	48	96	56	24
0 1 0 0	128	64	56	128	64	32
0 1 0 1	160	80	64	160	80	64
0 1 1 0	192	96	80	192	96	80
0 1 1 1	224	112	96	224	112	56
1 0 0 0	256	128	112	256	128	64
1 0 0 1	288	160	128	288	160	128
1 0 1 0	320	192	160	320	192	160
1 0 1 1	352	224	192	352	224	112
1 1 0 0	384	256	224	384	256	128
1 1 0 1	416	320	256	416	320	256
1 1 1 0	448	384	320	448	384	320
1 1 1 1

The sample rate is described in the frequency field. These values is dependent of which MPEG standard is used according to the following table.

Frequency value	MPEG-1	MPEG-2
0 0	44100 Hz	22050 Hz
0 1	48000 Hz	24000 Hz
1 0	32000 Hz	16000 Hz
1 1

FrameSize = 144 * BitRate / SampleRate
when the padding bit is cleared and

FrameSize = (144 * BitRate / SampleRate) + 1
when the padding bit is set.

The frameSize is of course an integer. If for an example BitRate=128000, SampleRate=44100 and the padding bit is cleared, then the FrameSize = 144 * 128000 / 44100 = 417

Mode value	mode
0 0	Stereo
0 1	Joint stereo
1 0	Dual channel
1 1	Mono

Emphasis value	Emphasis method
0 0	none
0 1	50/15ms
1 0
1 1	CCITT j.17

@author Eric Farng @version $Revision: 1.5 $

org.farng.mp3.MP3File

How is MP3 built?

The layer is defined with the two layers bits. They are oddly defined as

0 0	Not defined
0 1	Layer III
1 0	Layer II
1 1	Layer I

With this information and the information in the bitrate field we can determine the bitrate of the audio (in kbit/s) according to this table.

Bitrate value	MPEG-1, layer I	MPEG-1, layer II	MPEG-1, layer III	MPEG-2, layer I	MPEG-2, layer II	MPEG-2, layer III
0 0 0 0
0 0 0 1	32	32	32	32	32	8
0 0 1 0	64	48	40	64	48	16
0 0 1 1	96	56	48	96	56	24
0 1 0 0	128	64	56	128	64	32
0 1 0 1	160	80	64	160	80	64
0 1 1 0	192	96	80	192	96	80
0 1 1 1	224	112	96	224	112	56
1 0 0 0	256	128	112	256	128	64
1 0 0 1	288	160	128	288	160	128
1 0 1 0	320	192	160	320	192	160
1 0 1 1	352	224	192	352	224	112
1 1 0 0	384	256	224	384	256	128
1 1 0 1	416	320	256	416	320	256
1 1 1 0	448	384	320	448	384	320
1 1 1 1

The sample rate is described in the frequency field. These values is dependent of which MPEG standard is used according to the following table.

Frequency value	MPEG-1	MPEG-2
0 0	44100 Hz	22050 Hz
0 1	48000 Hz	24000 Hz
1 0	32000 Hz	16000 Hz
1 1

FrameSize = 144 * BitRate / SampleRate
when the padding bit is cleared and

FrameSize = (144 * BitRate / SampleRate) + 1
when the padding bit is set.

The frameSize is of course an integer. If for an example BitRate=128000, SampleRate=44100 and the padding bit is cleared, then the FrameSize = 144 * 128000 / 44100 = 417

Mode value	mode
0 0	Stereo
0 1	Joint stereo
1 0	Dual channel
1 1	Mono

Emphasis value	Emphasis method
0 0	none
0 1	50/15ms
1 0
1 1	CCITT j.17

@author Eric Farng @version $Revision: 1.5 $

org.jaudiotagger.audio.mp3.MP3File
This class represents a physical MP3 File
xnap.io.MP3File
ch.free.fr/programmers/frame_header.html

Examples of org.farng.mp3.MP3File

 */
public class MP3 {


    public static void main(String[] args) {
        try {
            MP3File mp3 = new MP3File(new File("C:/JPlayer/teste2.mp3"));
            TagOptionSingleton.getInstance().setDefaultSaveMode(TagConstant.MP3_FILE_SAVE_OVERWRITE);


//            // setup id3v1
//            ID3v1 id3v1 = mp3.getID3v1Tag();
//            Iterator t = id3v1.iterator();
//            id3v1.setTitle("Oi2");
//            mp3.setID3v1Tag(id3v1);




            mp3.getID3v2Tag().setAlbumTitle("owwwww");






//            // setup id3v2
//            AbstractID3v2Frame frame;
//            AbstractID3v2FrameBody frameBody;
//            frameBody = new FrameBodyTALB((byte) 0, "albumTitle");
//            frame = new ID3v2_4Frame(frameBody);


//            mp3.getID3v2Tag().setFrame(frame);
//
//            // setup lyrics3v2
//            AbstractLyrics3 lyrics3 = mp3.getLyrics3Tag();
//
//            Lyrics3v2Field field;
//            AbstractLyrics3v2FieldBody fieldBody;
//            fieldBody = new FieldBodyEAL("albumTitle");
//            field = new Lyrics3v2Field(fieldBody);
//            lyrics3.setField(field);
//
            // setup filename tag
//            frameBody = new FrameBodyTALB((byte) 0, "albumTitle");
//            frame = new ID3v2_4Frame(frameBody);
//            filenameId3.setFrame(frame);
            TagOptionSingleton.getInstance().setFilenameTagSave(true);


            mp3.save();
            




            System.out.println(mp3.toString());
        } catch (Exception ex) {
            Logger.getLogger(MP3.class.getName()).log(Level.SEVERE, null, ex);
        }

View Full Code Here

Examples of org.farng.mp3.MP3File

        montarGeneros();
        jTextField_Interp.setCrepzBuscador(this);
        jTextField_Album.setCrepzBuscador(this);


        try {
            mp3File = new MP3File(musica.getCaminho());
            setDadosv2();
        } catch (IOException ex) {
            throw new Exception("-Erro ao Carregar Propriedades do arquivo " + musica.getNome() + " \n", ex);
        } catch (TagException ex) {
            throw new Exception("-Erro ao Carregar Propriedades do arquivo " + mp3File.getMp3file().getName() + " \n", ex);

View Full Code Here

Examples of org.farng.mp3.MP3File

                String caminho = file.getAbsolutePath().trim().replace('\\', '/');
                if (listaNegra.contains(caminho)) {
                    System.out.println("Não importado, pois está na lista temporária de regeição: " + caminho);
                    return null;
                }
                MP3File mp3;
                try {
                    mp3 = new MP3File(caminho);
                    MusicaS musica = getMusica(mp3, file);
                    if (organizarPastas) {
                        File destinoF = new File(destino);
                        destinoF.mkdirs();
                        destinoF = new File(destinoF.getAbsolutePath() + "/" + file.getName());
                        if (!destinoF.getAbsolutePath().equals(file.getAbsolutePath())) {
                            if (file.renameTo(destinoF)) {
                                file = destinoF;
                            }
                            caminho = file.getAbsolutePath().replace('\\', '/');
                            mp3 = new MP3File(caminho);
                            musica = getMusica(mp3, file);
                        }


                    }
                    if (musica != null) {

View Full Code Here

Examples of org.farng.mp3.MP3File

    try {
      tmp = File.createTempFile("nutch", ".mp3");
      FileOutputStream fos = new FileOutputStream(tmp);
      fos.write(raw);
      fos.close();
      MP3File mp3 = new MP3File(tmp);


      if (mp3.hasID3v2Tag()) {
        parse = getID3v2Parse(mp3, content.getMetadata());
      } else if (mp3.hasID3v1Tag()) {
        parse = getID3v1Parse(mp3, content.getMetadata());
      } else {
        return new ParseStatus(ParseStatus.FAILED,
                               ParseStatus.FAILED_MISSING_CONTENT,
                               "No textual content available").getEmptyParse(conf);

View Full Code Here

Examples of org.farng.mp3.MP3File

    try {
      tmp = File.createTempFile("nutch", ".mp3");
      FileOutputStream fos = new FileOutputStream(tmp);
      fos.write(raw);
      fos.close();
      MP3File mp3 = new MP3File(tmp);


      if (mp3.hasID3v2Tag()) {
        parse = getID3v2Parse(mp3);
      } else if (mp3.hasID3v1Tag()) {
        parse = getID3v1Parse(mp3);
      } else {
        throw new ParseException("No textual content available");
      }

View Full Code Here

Examples of org.farng.mp3.MP3File

    try {
      tmp = File.createTempFile("nutch", ".mp3");
      FileOutputStream fos = new FileOutputStream(tmp);
      fos.write(raw);
      fos.close();
      MP3File mp3 = new MP3File(tmp);


      if (mp3.hasID3v2Tag()) {
        parse = getID3v2Parse(mp3);
      } else if (mp3.hasID3v1Tag()) {
        parse = getID3v1Parse(mp3);
      } else {
        throw new ParseException("No textual content available");
      }

View Full Code Here

Examples of org.farng.mp3.MP3File

    try {
      tmp = File.createTempFile("nutch", ".mp3");
      FileOutputStream fos = new FileOutputStream(tmp);
      fos.write(raw);
      fos.close();
      MP3File mp3 = new MP3File(tmp);


      if (mp3.hasID3v2Tag()) {
        parse = getID3v2Parse(mp3, content.getMetadata(), content);
      } else if (mp3.hasID3v1Tag()) {
        parse = getID3v1Parse(mp3, content.getMetadata(), content);
      } else {
        return new ParseStatus().getEmptyParseResult(content.getUrl(),
            getConf());
      }

View Full Code Here

Examples of org.farng.mp3.MP3File

   */
  public SongData( String path ) throws SongDataException {
    this.path = tagPrep(path);
    AbstractMP3Tag tag = null;
        try {
      MP3File mp3file = new MP3File(path);
      if (mp3file.hasID3v2Tag()) {
        tag = mp3file.getID3v2Tag();
      } else if (mp3file.hasID3v1Tag()) {
        tag = mp3file.getID3v1Tag();
      } else {
        throw new SongDataException( "No MP3 ID tag found for \""+path+"\"" );
      }
        } catch (TagException tE) {
            throw new SongDataException( "(TagException) Broken MP3 ID tag found for \""+path+"\"" );

View Full Code Here

Examples of org.farng.mp3.MP3File

    try {
      tmp = File.createTempFile("nutch", ".mp3");
      FileOutputStream fos = new FileOutputStream(tmp);
      fos.write(raw);
      fos.close();
      MP3File mp3 = new MP3File(tmp);


      if (mp3.hasID3v2Tag()) {
        parse = getID3v2Parse(mp3, content.getMetadata());
      } else if (mp3.hasID3v1Tag()) {
        parse = getID3v1Parse(mp3, content.getMetadata());
      } else {
        return new ParseStatus(ParseStatus.FAILED,
                               ParseStatus.FAILED_MISSING_CONTENT,
                               "No textual content available").getEmptyParse(conf);

View Full Code Here

Examples of org.farng.mp3.MP3File

            AbstractID3v2FrameBody frameBody;
            frameBody = new FrameBodyCOMM((byte) 0, "eng", comment, comment);
            frame = new ID3v2_3Frame(frameBody);
            id3v2.setFrame(frame);


            MP3File mp3File = new MP3File(file);
            TagOptionSingleton.getInstance().setDefaultSaveMode(TagConstant.MP3_FILE_SAVE_OVERWRITE);
            mp3File.setID3v1Tag(id3v1);
            mp3File.setID3v2Tag(id3v2);
            mp3File.save();
            // very dirty, TODO: prevent Jid3lib to generate the ".original" files
            File originalFile = new File(FilenameUtils.removeExtension(file.toString()) + ".original.mp3");
            if(originalFile.exists())
                originalFile.delete();
        } catch (TagException ex) {

View Full Code Here

0 1 2 3

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.