Examples of JTProtocol


Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

   * @param none
   * @return void
   */
  public void testDistributedCache() throws Exception {
    Configuration conf = new Configuration(cluster.getConf());
    JTProtocol wovenClient = cluster.getJTClient().getProxy();

    //This counter will check for count of a loop,
    //which might become infinite.
    int count = 0;

    SleepJob job = new SleepJob();
    job.setConf(conf);
    conf = job.setupJobConf(5, 1, 1000, 1000, 100, 100);

    DistributedCache.createSymlink(conf);
    URI uri = URI.create(uriPath);
    DistributedCache.addCacheFile(uri, conf);
    JobConf jconf = new JobConf(conf);

    //Controls the job till all verification is done
    FinishTaskControlAction.configureControlActionForJob(conf);

    //Submitting the job
    RunningJob rJob = cluster.getJTClient().getClient().submitJob(jconf);

    JobStatus[] jobStatus = client.getAllJobs();
    String userName = jobStatus[0].getUsername();

    TTClient tClient = null;
    JobInfo jInfo = wovenClient.getJobInfo(rJob.getID());
    LOG.info("jInfo is :" + jInfo);

    //Assert if jobInfo is null
    Assert.assertNotNull("jobInfo is null", jInfo);

    //Wait for the job to start running.
    count = 0;
    while (jInfo.getStatus().getRunState() != JobStatus.RUNNING) {
      UtilsForTests.waitFor(10000);
      count++;
      jInfo = wovenClient.getJobInfo(rJob.getID());
      //If the count goes beyond a point, then Assert; This is to avoid
      //infinite loop under unforeseen circumstances.
      if (count > 10) {
        Assert.fail("job has not reached running state for more than" +
            "100 seconds. Failing at this point");
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

   * @param none
   * @return void
   */
  public void testDistributedCache() throws Exception {
    Configuration conf = new Configuration(cluster.getConf());
    JTProtocol wovenClient = cluster.getJTClient().getProxy();

    //This counter will check for count of a loop,
    //which might become infinite.
    int count = 0;
    //This boolean will decide whether to run job again
    boolean continueLoop = true;
    //counter for job Loop
    int countLoop = 0;
    //This counter incerases with all the tasktrackers in which tasks ran
    int taskTrackerCounter = 0;
    //This will store all the tasktrackers in which tasks ran
    ArrayList<String> taskTrackerCollection = new ArrayList<String>();

    do {
      SleepJob job = new SleepJob();
      job.setConf(conf);
      conf = job.setupJobConf(5, 1, 1000, 1000, 100, 100);

      DistributedCache.createSymlink(conf);
      URI uri = URI.create(uriPath);
      DistributedCache.addCacheFile(uri, conf);
      JobConf jconf = new JobConf(conf);
      //Controls the job till all verification is done
      FinishTaskControlAction.configureControlActionForJob(conf);

      //Submitting the job
      RunningJob rJob = cluster.getJTClient().getClient().submitJob(jconf);

      //counter for job Loop
      countLoop++;

      TTClient tClient = null;
      JobInfo jInfo = wovenClient.getJobInfo(rJob.getID());
      LOG.info("jInfo is :" + jInfo);

      //Assert if jobInfo is null
      Assert.assertNotNull("jobInfo is null", jInfo);

      //Wait for the job to start running.
      count = 0;
      while (jInfo.getStatus().getRunState() != JobStatus.RUNNING) {
        UtilsForTests.waitFor(10000);
        count++;
        jInfo = wovenClient.getJobInfo(rJob.getID());
        //If the count goes beyond a point, then break; This is to avoid
        //infinite loop under unforeseen circumstances. Testcase will anyway
        //fail later.
        if (count > 10) {
          Assert.fail("job has not reached running state for more than" +
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

   * @param none
   * @return void
   */
  public void testDistributedCache() throws Exception {
    Configuration conf = new Configuration(cluster.getConf());
    JTProtocol wovenClient = cluster.getJTClient().getProxy();

    //This counter will check for count of a loop,
    //which might become infinite.
    int count = 0;
    //This boolean will decide whether to run job again
    boolean continueLoop = true;
    //counter for job Loop
    int countLoop = 0;
    //This counter increases with all the tasktrackers in which tasks ran
    int taskTrackerCounter = 0;
    //This will store all the tasktrackers in which tasks ran
    ArrayList<String> taskTrackerCollection = new ArrayList<String>();
    //This boolean tells if two tasks ran onteh same tasktracker or not
    boolean taskTrackerFound = false;

    do {
      SleepJob job = new SleepJob();
      job.setConf(conf);
      conf = job.setupJobConf(5, 1, 1000, 1000, 100, 100);

      //Before starting, Modify the file
      String input = "This will be the content of\n" + "distributed cache\n";
      //Creating the path with the file
      DataOutputStream file =
          UtilsForTests.createTmpFileDFS(dfs, URIPATH, permission, input);

      DistributedCache.createSymlink(conf);
      URI uri = URI.create(uriPath);
      DistributedCache.addCacheFile(uri, conf);
      JobConf jconf = new JobConf(conf);

      //Controls the job till all verification is done
      FinishTaskControlAction.configureControlActionForJob(conf);

      //Submitting the job
      RunningJob rJob = cluster.getJTClient().getClient().submitJob(jconf);

      //counter for job Loop
      countLoop++;

      TTClient tClient = null;
      JobInfo jInfo = wovenClient.getJobInfo(rJob.getID());
      LOG.info("jInfo is :" + jInfo);

      //Assert if jobInfo is null
      Assert.assertNotNull("jobInfo is null", jInfo);

      //Wait for the job to start running.
      count = 0;
      while (jInfo.getStatus().getRunState() != JobStatus.RUNNING) {
        UtilsForTests.waitFor(10000);
        count++;
        jInfo = wovenClient.getJobInfo(rJob.getID());
        //If the count goes beyond a point, then break; This is to avoid
        //infinite loop under unforeseen circumstances. Testcase will anyway
        //fail later.
        if (count > 10) {
          Assert.fail("job has not reached running state for more than" +
            "100 seconds. Failing at this point");
        }
      }

      LOG.info("job id is :" + rJob.getID().toString());

      TaskInfo[] taskInfos = cluster.getJTClient().getProxy()
             .getTaskInfo(rJob.getID());

      boolean distCacheFileIsFound;

      for (TaskInfo taskInfo : taskInfos) {
        distCacheFileIsFound = false;
        String[] taskTrackers = taskInfo.getTaskTrackers();
        for (String taskTracker : taskTrackers) {
          //Formatting tasktracker to get just its FQDN
          taskTracker = UtilsForTests.getFQDNofTT(taskTracker);
          LOG.info("taskTracker is :" + taskTracker);

          //The tasktrackerFound variable is initialized
          taskTrackerFound = false;

          //This will be entered from the second job onwards
          if (countLoop > 1) {
            if (taskTracker != null) {
              continueLoop = taskTrackerCollection.contains(taskTracker);
            }
            if (continueLoop) {
              taskTrackerFound = true;
            }
          }
          //Collecting the tasktrackers
          if (taskTracker != null)
            taskTrackerCollection.add(taskTracker);

          //we have loopped through two times to look for task
          //getting submitted on same tasktrackers.The same tasktracker
          //for subsequent jobs was not hit maybe because of many number
          //of tasktrackers. So, testcase has to stop here.
          if (countLoop > 1) {
            continueLoop = false;
          }

          tClient = cluster.getTTClient(taskTracker);

          //tClient maybe null because the task is already dead. Ex: setup
          if (tClient == null) {
            continue;
          }

          String[] localDirs = tClient.getMapredLocalDirs();
          int distributedFileCount = 0;
          //Go to every single path
          for (String localDir : localDirs) {
            //Public Distributed cache will always be stored under
            //mapre.local.dir/tasktracker/archive
            localDir = localDir + Path.SEPARATOR +
                   TaskTracker.getPublicDistributedCacheDir();
            LOG.info("localDir is : " + localDir);

            //Get file status of all the directories
            //and files under that path.
            FileStatus[] fileStatuses = tClient.listStatus(localDir,
                true, true);
            for (FileStatus  fileStatus : fileStatuses) {
              Path path = fileStatus.getPath();
              LOG.info("path is :" + path.toString());
              //Checking if the received path ends with
              //the distributed filename
              distCacheFileIsFound = (path.toString()).
                  endsWith(distributedFileName);
              //If file is found, check for its permission.
              //Since the file is found break out of loop
              if (distCacheFileIsFound){
                LOG.info("PATH found is :" + path.toString());
                distributedFileCount++;
                String filename = path.getName();
                FsPermission fsPerm = fileStatus.getPermission();
                Assert.assertTrue("File Permission is not 777",
                    fsPerm.equals(new FsPermission("777")));
              }
            }
          }

          LOG.debug("The distributed FileCount is :" + distributedFileCount);
          LOG.debug("The taskTrackerFound is :" + taskTrackerFound);

          // If distributed cache is modified in dfs
          // between two job runs, it can be present more than once
          // in any of the task tracker, in which job ran.
          if (distributedFileCount != 2 && taskTrackerFound) {
            Assert.fail("The distributed cache file has to be two. " +
                "But found was " + distributedFileCount);
          } else if (distributedFileCount > 1 && !taskTrackerFound) {
            Assert.fail("The distributed cache file cannot more than one." +
                " But found was " + distributedFileCount);
          } else if (distributedFileCount < 1)
            Assert.fail("The distributed cache file is less than one. " +
                "But found was " + distributedFileCount);
          if (!distCacheFileIsFound) {
            Assert.assertEquals("The distributed cache file does not exist",
                distCacheFileIsFound, false);
          }
        }
      }
      //Allow the job to continue through MR control job.
      for (TaskInfo taskInfoRemaining : taskInfos) {
        FinishTaskControlAction action = new FinishTaskControlAction(TaskID
           .downgrade(taskInfoRemaining.getTaskID()));
        Collection<TTClient> tts = cluster.getTTClients();
        for (TTClient cli : tts) {
          cli.getProxy().sendAction(action);
        }
      }

      //Killing the job because all the verification needed
      //for this testcase is completed.
      rJob.killJob();

      //Waiting for 3 seconds for cleanup to start
      Thread.sleep(3000);

      //Getting the last cleanup task's tasktracker also, as
      //distributed cache gets uploaded even during cleanup.
      TaskInfo[] myTaskInfos = wovenClient.getTaskInfo(rJob.getID());
      if (myTaskInfos != null) {
        for(TaskInfo info : myTaskInfos) {
          if(info.isSetupOrCleanup()) {
            String[] taskTrackers = info.getTaskTrackers();
            for(String taskTracker : taskTrackers) {
              //Formatting tasktracker to get just its FQDN
              taskTracker = UtilsForTests.getFQDNofTT(taskTracker);
              LOG.info("taskTracker is :" + taskTracker);
              //Collecting the tasktrackers
              if (taskTracker != null)
                taskTrackerCollection.add(taskTracker);
            }   
          }
        }
      }

      //Making sure that the job is complete.
      while (jInfo != null && !jInfo.getStatus().isJobComplete()) {
        Thread.sleep(10000);
        jInfo = wovenClient.getJobInfo(rJob.getID());
      }

    } while (continueLoop);
  }
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

   * @throws Exception
   */
  @Test
  public void testTaskDetails() throws Exception {
    Configuration conf = new Configuration(cluster.getConf());
    JTProtocol wovenClient = cluster.getJTClient().getProxy();
    FinishTaskControlAction.configureControlActionForJob(conf);
    SleepJob job = new SleepJob();
    job.setConf(conf);

    conf = job.setupJobConf(1, 1, 100, 100, 100, 100);
    JobClient client = cluster.getJTClient().getClient();

    RunningJob rJob = client.submitJob(new JobConf(conf));
    JobID id = rJob.getID();

    JobInfo jInfo = wovenClient.getJobInfo(id);

    while (jInfo.getStatus().getRunState() != JobStatus.RUNNING) {
      Thread.sleep(1000);
      jInfo = wovenClient.getJobInfo(id);
    }

    LOG.info("Waiting till job starts running one map");

    TaskInfo[] myTaskInfos = wovenClient.getTaskInfo(id);
    boolean isOneTaskStored = false;
    String sometaskpid = null;
    org.apache.hadoop.mapreduce.TaskAttemptID sometaskId = null;
    TTClient myCli = null;
    for(TaskInfo info : myTaskInfos) {
      if(!info.isSetupOrCleanup()) {
        String[] taskTrackers = info.getTaskTrackers();
        for(String taskTracker : taskTrackers) {
          TTInfo ttInfo = wovenClient.getTTInfo(taskTracker);
          TTClient ttCli =  cluster.getTTClient(ttInfo.getStatus().getHost());
          TaskID taskId = info.getTaskID();
          TTTaskInfo ttTaskInfo = ttCli.getProxy().getTask(taskId);
          Assert.assertNotNull(ttTaskInfo);
          Assert.assertNotNull(ttTaskInfo.getConf());
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

      bListedTT.add(client);
      blackListTT(client);
    }
    //Now run the high ram job
    JobClient jobClient = cluster.getJTClient().getClient();
    JTProtocol remoteJTClient = cluster.getJTClient().getProxy();
    Configuration conf = remoteJTClient.getDaemonConf();   
    hRamHelper.runHighRamJob(conf, jobClient, remoteJTClient,
        "Job did not succeed");
    //put the task tracker back in healthy state
    for( int i =0; i < bListedTT.size() ; ++i) {
      unBlackListTT(bListedTT.get(i));
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

   * @throws Exception
   */
  @Test
  public void testTaskDetails() throws Exception {
    Configuration conf = new Configuration(cluster.getConf());
    JTProtocol wovenClient = cluster.getJTClient().getProxy();
    FinishTaskControlAction.configureControlActionForJob(conf);
    SleepJob job = new SleepJob();
    job.setConf(conf);

    Job rJob = job.createJob(1, 1, 100, 100, 100, 100);
    JobClient client = cluster.getJTClient().getClient();
    rJob.submit();
    RunningJob rJob1 =
        client.getJob(org.apache.hadoop.mapred.JobID.downgrade(rJob.getJobID()));
    JobID id = rJob.getJobID();

    JobInfo jInfo = wovenClient.getJobInfo(id);

    while (jInfo.getStatus().getRunState() != JobStatus.RUNNING) {
      Thread.sleep(1000);
      jInfo = wovenClient.getJobInfo(id);
    }

    LOG.info("Waiting till job starts running one map");

    TaskInfo[] myTaskInfos = wovenClient.getTaskInfo(id);
    boolean isOneTaskStored = false;
    String sometaskpid = null;
    org.apache.hadoop.mapreduce.TaskAttemptID sometaskId = null;
    TTClient myCli = null;
    for (TaskInfo info : myTaskInfos) {
      if (!info.isSetupOrCleanup()) {
        String[] taskTrackers = info.getTaskTrackers();
        for (String taskTracker : taskTrackers) {
          TTInfo ttInfo = wovenClient.getTTInfo(taskTracker);
          TTClient ttCli = cluster.getTTClient(ttInfo.getStatus().getHost());
          TaskID taskId = info.getTaskID();
          TTTaskInfo ttTaskInfo = ttCli.getProxy().getTask(taskId);
          Assert.assertNotNull(ttTaskInfo);
          Assert.assertNotNull(ttTaskInfo.getConf());
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

    FileInputFormat.setInputPaths(jobConf, inputDir);
    FileOutputFormat.setOutputPath(jobConf, outputDir);
   
    JTClient jtClient = cluster.getJTClient();
    JobClient client = jtClient.getClient();
    JTProtocol wovenClient = cluster.getJTClient().getProxy();
    RunningJob runJob = client.submitJob(jobConf);
    JobID id = runJob.getID();
    JobInfo jInfo = wovenClient.getJobInfo(id);
    Assert.assertNotNull("Job information is null",jInfo);

    Assert.assertTrue("Job has not been started for 1 min.",
        jtClient.isJobStarted(id));

    TaskInfo[] taskInfos = wovenClient.getTaskInfo(id);
    for (TaskInfo taskinfo : taskInfos) {
      if (!taskinfo.isSetupOrCleanup()) {
        taskInfo = taskinfo;
        break;
      }
    }

    Assert.assertTrue("Task has not been started for 1 min.",
        jtClient.isTaskStarted(taskInfo));

    tID = TaskID.downgrade(taskInfo.getTaskID());
    TaskAttemptID tAttID = new TaskAttemptID(tID,0);
    FinishTaskControlAction action = new FinishTaskControlAction(tID);

    Collection<TTClient> ttClients = cluster.getTTClients();
    for (TTClient ttClient : ttClients) {
      TTProtocol tt = ttClient.getProxy();
      tt.sendAction(action);
      ttTaskinfo = tt.getTasks();
      for (TTTaskInfo tttInfo : ttTaskinfo) {
        if (!tttInfo.isTaskCleanupTask()) {
          pid = tttInfo.getPid();
          ttClientIns = ttClient;
          ttIns = tt;
          break;
        }
      }
      if (ttClientIns != null) {
        break;
      }
    }


    Assert.assertTrue("Map process tree is not alive before task kills.",
        ttIns.isProcessTreeAlive(pid));

    String args[] = new String[] { "-kill-task", tAttID.toString() };
    int exitCode = runTool(jobConf, client, args);
    Assert.assertEquals("Exit Code:", 0, exitCode);
   
    LOG.info("Waiting till the task is killed...");
    counter = 0;
    while (counter < 30) {
      if (taskInfo.getTaskStatus().length > 0) {
        if (taskInfo.getTaskStatus()[0].getRunState() ==
            TaskStatus.State.KILLED) {
          break;
        }
      }
      UtilsForTests.waitFor(1000);
      taskInfo = wovenClient.getTaskInfo(taskInfo.getTaskID());
      counter ++;
    }

    runJob.killJob();
    LOG.info("Waiting till the job is completed...");
    counter = 0;
    while (counter < 60) {
      if (jInfo.getStatus().isJobComplete()) {
        break;
      }
      UtilsForTests.waitFor(1000);
      jInfo = wovenClient.getJobInfo(id);
      counter ++;
    }
    Assert.assertTrue("Job has not  been completed for 1 min.",
        counter != 60 );
    ttIns = ttClientIns.getProxy();
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

    FileInputFormat.setInputPaths(jobConf, inputDir);
    FileOutputFormat.setOutputPath(jobConf, outputDir);
    JTClient jtClient = cluster.getJTClient();
    JobClient client = jtClient.getClient();
    JTProtocol wovenClient = cluster.getJTClient().getProxy();
    RunningJob runJob = client.submitJob(jobConf);
    JobID id = runJob.getID();
    JobInfo jInfo = wovenClient.getJobInfo(id);   
    Assert.assertNotNull("Job information is null", jInfo);

    Assert.assertTrue("Job has not been started for 1 min.",
        jtClient.isJobStarted(id));

    TaskInfo[] taskInfos = wovenClient.getTaskInfo(id);
    for (TaskInfo taskinfo : taskInfos) {
      if (!taskinfo.isSetupOrCleanup()) {
        taskInfo = taskinfo;
        break;
      }
    }

    Assert.assertTrue("Task has not been started for 1 min.",
        jtClient.isTaskStarted(taskInfo));

    tID = TaskID.downgrade(taskInfo.getTaskID());
    taskAttID = new TaskAttemptID(tID,0);
    FinishTaskControlAction action = new FinishTaskControlAction(tID);
    Collection<TTClient> ttClients = cluster.getTTClients();
    for (TTClient ttClient : ttClients) {
      TTProtocol tt = ttClient.getProxy();
      tt.sendAction(action);
      ttTaskinfo = tt.getTasks();
      for (TTTaskInfo tttInfo : ttTaskinfo) {
        if (!tttInfo.isTaskCleanupTask()) {
          pid = tttInfo.getPid();
          ttClientIns = ttClient;
          ttIns = tt;
          break;
        }
      }
      if (ttClientIns != null) {
        break;
      }
    }


    Assert.assertTrue("Map process is not alive before task kills.",
        ttIns.isProcessTreeAlive(pid));

    NetworkedJob networkJob = client.new NetworkedJob(jInfo.getStatus());
    networkJob.killTask(taskAttID, false);

    LOG.info("Waiting till the task is killed...");
    taskInfo = wovenClient.getTaskInfo(taskInfo.getTaskID());
    counter = 0;
    while (counter < 30) {
      if (taskInfo.getTaskStatus()[0].getRunState() ==
              TaskStatus.State.KILLED) {
        break;
      }
      UtilsForTests.waitFor(1000);
      taskInfo = wovenClient.getTaskInfo(taskInfo.getTaskID());
      counter ++;
    }
    runJob.killJob();
    LOG.info("Waiting till the job is completed...");
    counter = 0;
    while (counter < 60) {
      if (jInfo.getStatus().isJobComplete()) {
        break;
      }
      UtilsForTests.waitFor(1000);
      jInfo = wovenClient.getJobInfo(id);
      counter ++;
    }
    Assert.assertTrue("Job has not been completed for 1 min.",
        counter != 60);
    UtilsForTests.waitFor(2000);
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

    FileInputFormat.setInputPaths(jobConf, inputDir);
    FileOutputFormat.setOutputPath(jobConf, outputDir);

    JTClient jtClient = cluster.getJTClient();
    JobClient client = jtClient.getClient();
    JTProtocol wovenClient = cluster.getJTClient().getProxy();
    RunningJob runJob = client.submitJob(jobConf);
    JobID id = runJob.getID();
    JobInfo jInfo = wovenClient.getJobInfo(id);
    Assert.assertNotNull("Job information is null", jInfo);

    Assert.assertTrue("Job has not been started for 1 min.",
        jtClient.isJobStarted(id));

    TaskInfo[] taskInfos = wovenClient.getTaskInfo(id);
    for (TaskInfo taskinfo : taskInfos) {
      if (!taskinfo.isSetupOrCleanup()) {
        taskInfo = taskinfo;
        break;
      }
    }

    Assert.assertTrue("Task has not been started for 1 min.",
        jtClient.isTaskStarted(taskInfo));

    tID = TaskID.downgrade(taskInfo.getTaskID());   
    FinishTaskControlAction action = new FinishTaskControlAction(tID);
   
    Collection<TTClient> ttClients = cluster.getTTClients();
    for (TTClient ttClient : ttClients) {
      TTProtocol tt = ttClient.getProxy();
      tt.sendAction(action);
      ttTaskinfo = tt.getTasks();
      for (TTTaskInfo tttInfo : ttTaskinfo) {
        if (!tttInfo.isTaskCleanupTask()) {
          pid = tttInfo.getPid();
          ttClientIns = ttClient;
          ttIns = tt;
          break;
        }
      }
      if (ttClientIns != null) {
        break;
      }
    }

    Assert.assertTrue("Map process is not alive before task fails.",
            ttIns.isProcessTreeAlive(pid));

    LOG.info("Waiting till the task is failed...");
    counter = 0;
    while (counter < 60) {
      if (taskInfo.getTaskStatus().length > 0) {
        if (taskInfo.getTaskStatus()[0].getRunState() ==
            TaskStatus.State.FAILED) {
          break;
        }
      }
      UtilsForTests.waitFor(1000);
      taskInfo = wovenClient.getTaskInfo(taskInfo.getTaskID());
      counter++;
    }

    LOG.info("Waiting till the job is completed...");
    counter = 0;
    while (counter < 60) {
      if (jInfo.getStatus().isJobComplete()) {
        break;
      }
      UtilsForTests.waitFor(1000);
      jInfo = wovenClient.getJobInfo(id);
      counter ++;
    }
    Assert.assertTrue("Job has not been completed for 1 min.",
        counter != 60);
    ttIns = ttClientIns.getProxy();
View Full Code Here

Examples of org.apache.hadoop.mapreduce.test.system.JTProtocol

    FileInputFormat.setInputPaths(jobConf, inputDir);
    FileOutputFormat.setOutputPath(jobConf, outputDir);

    JTClient jtClient = cluster.getJTClient();
    JobClient client = jtClient.getClient();
    JTProtocol wovenClient = cluster.getJTClient().getProxy();
    RunningJob runJob = client.submitJob(jobConf);
    JobID id = runJob.getID();
    JobInfo jInfo = wovenClient.getJobInfo(id);
    Assert.assertNotNull("Job information is null", jInfo);

    Assert.assertTrue("Job has not been started for 1 min.",
        jtClient.isJobStarted(id));

    TaskInfo[] taskInfos = wovenClient.getTaskInfo(id);
    for (TaskInfo taskinfo : taskInfos) {
      if (!taskinfo.isSetupOrCleanup()) {
        taskInfo = taskinfo;
        break;
      }
    }

    Assert.assertTrue("Task has not been started for 1 min.",
        jtClient.isTaskStarted(taskInfo));

    tID = TaskID.downgrade(taskInfo.getTaskID());
    TaskAttemptID tAttID = new TaskAttemptID(tID,0);
    FinishTaskControlAction action = new FinishTaskControlAction(tID);

    Collection<TTClient> ttClients = cluster.getTTClients();
    for (TTClient ttClient : ttClients) {
      TTProtocol tt = ttClient.getProxy();
      tt.sendAction(action);
      ttTaskinfo = tt.getTasks();
      for (TTTaskInfo tttInfo : ttTaskinfo) {
        if (!tttInfo.isTaskCleanupTask()) {
          pid = tttInfo.getPid();
          ttClientIns = ttClient;
          ttIns = tt;
          break;
        }
      }
      if (ttClientIns != null) {
        break;
      }
    }


    Assert.assertTrue("Map process is not alive before task fails.",
        ttIns.isProcessTreeAlive(pid));

    String args[] = new String[] { "-fail-task", tAttID.toString() };
    int exitCode = runTool(jobConf, client, args);
    Assert.assertEquals("Exit Code:", 0, exitCode);

    LOG.info("Waiting till the task is failed...");
    taskInfo = wovenClient.getTaskInfo(taskInfo.getTaskID());
    counter = 0;
    while (counter < 60) {
      if (taskInfo.getTaskStatus().length > 0) {
        if (taskInfo.getTaskStatus()[0].getRunState() ==
            TaskStatus.State.FAILED) {
          break;
        }
      }
      UtilsForTests.waitFor(1000);
      taskInfo = wovenClient.getTaskInfo(taskInfo.getTaskID());
      counter ++;
    }
    counter = 0;
    LOG.info("Waiting till the job is completed...");
    while (counter < 60) {
      if (jInfo.getStatus().isJobComplete()) {
        break;
      }
      UtilsForTests.waitFor(1000);
      jInfo = wovenClient.getJobInfo(id);
      counter ++;
    }

    Assert.assertTrue("Job has not been completed for 1 min",
        counter != 60);
View Full Code Here
TOP
Copyright © 2018 www.massapi.com. All rights reserved.
All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.