Examples of javax.microedition.lcdui.TextField

javax.microedition.lcdui.TextField
A TextField is an editable text component that may be placed into a {@link Form Form}. It can be given a piece of text that is used as the initial value.
A TextField has a maximum size, which is the maximum number of characters that can be stored in the object at any time (its capacity). This limit is enforced when the TextField instance is constructed, when the user is editing text within the TextField, as well as when the application program calls methods on the TextField that modify its contents. The maximum size is the maximum stored capacity and is unrelated to the number of characters that may be displayed at any given time. The number of characters displayed and their arrangement into rows and columns are determined by the device.

The implementation may place a boundary on the maximum size, and the maximum size actually assigned may be smaller than the application had requested. The value actually assigned will be reflected in the value returned by {@link #getMaxSize() getMaxSize()}. A defensively-written application should compare this value to the maximum size requested and be prepared to handle cases where they differ.

Input Constraints

The TextField shares the concept of input constraints with the {@link TextBox TextBox} class. The differentconstraints allow the application to request that the user's input be restricted in a variety of ways. The implementation is required to restrict the user's input as requested by the application. For example, if the application requests the NUMERIC constraint on a TextField, the implementation must allow only numeric characters to be entered.

The actual contents of the text object are set and modified by and are reported to the application through the TextBox and TextField APIs. The displayed contents may differ from the actual contents if the implementation has chosen to provide special formatting suitable for the text object's constraint setting. For example, a PHONENUMBER field might be displayed with digit separators and punctuation as appropriate for the phone number conventions in use, grouping the digits into country code, area code, prefix, etc. Any spaces or punctuation provided are not considered part of the text object's actual contents. For example, a text object with the PHONENUMBER constraint might display as follows:
(408) 555-1212
but the actual contents of the object visible to the application through the APIs would be the string "4085551212". The size method reflects the number of characters in the actual contents, not the number of characters that are displayed, so for this example the size method would return 10.

Some constraints, such as DECIMAL, require the implementation to perform syntactic validation of the contents of the text object. The syntax checking is performed on the actual contents of the text object, which may differ from the displayed contents as described above. Syntax checking is performed on the initial contents passed to the constructors, and it is also enforced for all method calls that affect the contents of the text object. The methods and constructors throw IllegalArgumentException if they would result in the contents of the text object not conforming to the required syntax.

The value passed to the {@link #setConstraints setConstraints()} methodconsists of a restrictive constraint setting described above, as well as a variety of flag bits that modify the behavior of text entry and display. The value of the restrictive constraint setting is in the low order 16 bits of the value, and it may be extracted by combining the constraint value with the CONSTRAINT_MASK constant using the bit-wise AND (&) operator. The restrictive constraint settings are as follows:
ANY EMAILADDR NUMERIC PHONENUMBER URL DECIMAL

The modifier flags reside in the high order 16 bits of the constraint value, that is, those in the complement of the CONSTRAINT_MASK constant. The modifier flags may be tested individually by combining the constraint value with a modifier flag using the bit-wise AND (&) operator. The modifier flags are as follows:
PASSWORD UNEDITABLE SENSITIVE NON_PREDICTIVE INITIAL_CAPS_WORD INITIAL_CAPS_SENTENCE

Input Modes

The TextField shares the concept of input modes with the {@link TextBox TextBox} class. The application can request that theimplementation use a particular input mode when the user initiates editing of a TextField or TextBox. The input mode is a concept that exists within the user interface for text entry on a particular device. The application does not request an input mode directly, since the user interface for text entry is not standardized across devices. Instead, the application can request that the entry of certain characters be made convenient. It can do this by passing the name of a Unicode character subset to the {@link #setInitialInputMode setInitialInputMode()} method. Calling this methodrequests that the implementation set the mode of the text entry user interface so that it is convenient for the user to enter characters in this subset. The application can also request that the input mode have certain behavioral characteristics by setting modifier flags in the constraints value.
The requested input mode should be used whenever the user initiates the editing of a TextBox or TextField object. If the user had changed input modes in a previous editing session, the application's requested input mode should take precedence over the previous input mode set by the user. However, the input mode is not restrictive, and the user is allowed to change the input mode at any time during editing. If editing is already in progress, calls to the setInitialInputMode method do not affect the current input mode, but instead take effect at the next time the user initiates editing of this text object.
The initial input mode is a hint to the implementation. If the implementation cannot provide an input mode that satisfies the application's request, it should use a default input mode.
The input mode that results from the application's request is not a restriction on the set of characters the user is allowed to enter. The user MUST be allowed to switch input modes to enter any character that is allowed within the current constraint setting. The constraint setting takes precedence over an input mode request, and the implementation may refuse to supply a particular input mode if it is inconsistent with the current constraint setting.
For example, if the current constraint is ANY, the call
setInitialInputMode("MIDP_UPPERCASE_LATIN");
should set the initial input mode to allow entry of uppercase Latin characters. This does not restrict input to these characters, and the user will be able to enter other characters by switching the input mode to allow entry of numerals or lowercase Latin letters. However, if the current constraint is NUMERIC, the implementation may ignore the request to set an initial input mode allowing MIDP_UPPERCASE_LATIN characters because these characters are not allowed in a TextField whose constraint is NUMERIC. In this case, the implementation may instead use an input mode that allows entry of numerals, since such an input mode is most appropriate for entry of data under the NUMERIC constraint.
A string is used to name the Unicode character subset passed as a parameter to the {@link #setInitialInputMode setInitialInputMode()} method.String comparison is case sensitive.
Unicode character blocks can be named by adding the prefix "UCB_" to the the string names of fields representing Unicode character blocks as defined in the J2SE class java.lang.Character.UnicodeBlock. Any Unicode character block may be named in this fashion. For convenience, the most common Unicode character blocks are listed below.
UCB_BASIC_LATIN UCB_GREEK UCB_CYRILLIC UCB_ARMENIAN UCB_HEBREW UCB_ARABIC UCB_DEVANAGARI UCB_BENGALI UCB_THAI UCB_HIRAGANA UCB_KATAKANA UCB_HANGUL_SYLLABLES

"Input subsets" as defined by the J2SE class java.awt.im.InputSubset may be named by adding the prefix "IS_" to the string names of fields representing input subsets as defined in that class. Any defined input subset may be used. For convenience, the names of the currently defined input subsets are listed below.
IS_FULLWIDTH_DIGITS IS_FULLWIDTH_LATIN IS_HALFWIDTH_KATAKANA IS_HANJA IS_KANJI IS_LATIN IS_LATIN_DIGITS IS_SIMPLIFIED_HANZI IS_TRADITIONAL_HANZI

MIDP has also defined the following character subsets:
MIDP_UPPERCASE_LATIN - the subset of IS_LATIN that corresponds to uppercase Latin letters

MIDP_LOWERCASE_LATIN - the subset of IS_LATIN that corresponds to lowercase Latin letters

Finally, implementation-specific character subsets may be named with strings that have a prefix of "X_". In order to avoid namespace conflicts, it is recommended that implementation-specific names include the name of the defining company or organization after the initial "X_" prefix.
For example, a Japanese language application might have a particular TextField that the application intends to be used primarily for input of words that are "loaned" from languages other than Japanese. The application might request an input mode facilitating Hiragana input by issuing the following method call:
textfield.setInitialInputMode("UCB_HIRAGANA");
Implementation Note

Implementations need not compile in all the strings listed above. Instead, they need only to compile in the strings that name Unicode character subsets that they support. If the subset name passed by the application does not match a known subset name, the request should simply be ignored without error, and a default input mode should be used. This lets implementations support this feature reasonably inexpensively. However, it has the consequence that the application cannot tell whether its request has been accepted, nor whether the Unicode character subset it has requested is actually a valid subset. @since MIDP 1.0

        return callFromTextField;
    }


    private static TextField getPauseCharTextField() {
        if (pauseCharTextField == null) {
            pauseCharTextField = new TextField("Pause Symbol:", "", 3, TextField.ANY);//.PHONENUMBER);
        }
        return pauseCharTextField;
    }

View Full Code Here

        return pauseCharTextField;
    }


    private static TextField getGVNumberTextField() {
        if (gvNumberTextField == null) {
            gvNumberTextField = new TextField("GV Number:", gvNumber, 10, TextField.PHONENUMBER);
        }
        return gvNumberTextField;
    }

View Full Code Here

        return changeSettingsMenu;
    }


    private static TextField getUsernameTextField() {
        if (usernameTextField == null) {
            usernameTextField = new TextField("Username:", username, 40, TextField.ANY);
        }
        return usernameTextField;
    }

View Full Code Here

        return usernameTextField;
    }


    private static TextField getPasswordTextField() {
        if (passwordTextField == null) {
            passwordTextField = new TextField("Password:", null, 40, TextField.PASSWORD);
        }
        return passwordTextField;
    }

View Full Code Here

        return passwordTextField;
    }


    private static TextField getIntervalTextField() {
        if (intervalTextField == null) {
            intervalTextField = new TextField("Check Inbox (secs). 0 for never", interval, 10, TextField.NUMERIC);
        }
        return intervalTextField;
    }

View Full Code Here

        return intervalTextField;
    }


    private static TextField getCallFromTextField() {
        if (callFromTextField == null) {
            callFromTextField = new TextField("Call From:", callFrom, 15, TextField.PHONENUMBER);
        }
        return callFromTextField;
    }

View Full Code Here


    private TextField getUsernameTF()
    {
        if(usernameTF == null)
        {
            usernameTF = new TextField("Username", "", 40, TextField.ANY);
        }
        return usernameTF;
    }

View Full Code Here

        return changeSettingsMenu;
    }


    private static TextField getUsernameTextField() {
        if (usernameTextField == null) {
            usernameTextField = new TextField("Username:", username, 40, TextField.ANY);
        }
        return usernameTextField;
    }

View Full Code Here

        return usernameTextField;
    }


    private static TextField getPasswordTextField() {
        if (passwordTextField == null) {
            passwordTextField = new TextField("Password:", null, 40, TextField.PASSWORD);
        }
        return passwordTextField;
    }

View Full Code Here

        return passwordTextField;
    }


    private static TextField getIntervalTextField() {
        if (intervalTextField == null) {
            intervalTextField = new TextField("Check Inbox (secs). 0 for never", interval, 10, TextField.NUMERIC);
        }
        return intervalTextField;
    }

View Full Code Here

0 1 2 3 4 5

TOP

Related Classes of javax.microedition.lcdui.TextField

bm.mvc.PromptView

ChangeStatus

cnam.nsy208.sudoku.view.LogView

com.rim.samples.device.rmsdemo.RMSDemo

com.substanceofcode.rssreader.presentation.ImportFeedsForm

com.substanceofcode.rssreader.presentation.RssReaderMIDlet

com.substanceofcode.rssreader.presentation.RssReaderMIDlet$BMForm

com.substanceofcode.rssreader.presentation.SettingsForm

com.sun.midp.lcdui.DynamicCharacterArray

com.tinygo.FileSelectScreen

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.

Examples of javax.microedition.lcdui.TextField

Input Constraints

Input Modes

Implementation Note

Related Classes of javax.microedition.lcdui.TextField