Examples of InBandBytestreamManager

org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager
org/extensions/xep-0047.html">XEP-0047.
The In-Band Bytestreams (IBB) enables two entities to establish a virtual bytestream over which they can exchange Base64-encoded chunks of data over XMPP itself. It is the fall-back mechanism in case the Socks5 bytestream method of transferring data is not available.
There are two ways to send data over an In-Band Bytestream. It could either use IQ stanzas to send data packets or message stanzas. If IQ stanzas are used every data packet is acknowledged by the receiver. This is the recommended way to avoid possible rate-limiting penalties. Message stanzas are not acknowledged because most XMPP server implementation don't support stanza flow-control method like Advanced Message Processing. To set the stanza that should be used invoke {@link #setStanza(StanzaType)}.
To establish an In-Band Bytestream invoke the {@link #establishSession(String)} method. This willnegotiate an in-band bytestream with the given target JID and return a session.
If a session ID for the In-Band Bytestream was already negotiated (e.g. while negotiating a file transfer) invoke {@link #establishSession(String,String)}.
To handle incoming In-Band Bytestream requests add an {@link InBandBytestreamListener} to themanager. There are two ways to add this listener. If you want to be informed about incoming In-Band Bytestreams from a specific user add the listener by invoking {@link #addIncomingBytestreamListener(BytestreamListener,String)}. If the listener should respond to all In-Band Bytestream requests invoke {@link #addIncomingBytestreamListener(BytestreamListener)}.
Note that the registered {@link InBandBytestreamListener} will NOT be notified on incomingIn-Band bytestream requests sent in the context of XEP-0096 file transfer. (See {@link FileTransferManager})
If no {@link InBandBytestreamListener}s are registered, all incoming In-Band bytestream requests will be rejected by returning a <not-acceptable/> error to the initiator. @author Henning Staib
rocks.xmpp.extensions.bytestreams.ibb.InBandByteStreamManager
xtensions/xep-0047.html">XEP-0047: In-Band Bytestreams

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager

        Random rand = new Random();
        final byte[] data = new byte[dataSize];
        rand.nextBytes(data);
        final SynchronousQueue<byte[]> queue = new SynchronousQueue<byte[]>();


        InBandBytestreamManager targetByteStreamManager = InBandBytestreamManager.getByteStreamManager(targetConnection);


        InBandBytestreamListener incomingByteStreamListener = new InBandBytestreamListener() {


            public void incomingBytestreamRequest(InBandBytestreamRequest request) {
                InputStream inputStream;
                try {
                    inputStream = request.accept().getInputStream();
                    byte[] receivedData = new byte[dataSize];
                    int totalRead = 0;
                    while (totalRead < dataSize) {
                        int read = inputStream.read(receivedData, totalRead, dataSize - totalRead);
                        totalRead += read;
                    }
                    queue.put(receivedData);
                }
                catch (Exception e) {
                    fail(e.getMessage());
                }
            }


        };
        targetByteStreamManager.addIncomingBytestreamListener(incomingByteStreamListener);


        InBandBytestreamManager initiatorByteStreamManager = InBandBytestreamManager.getByteStreamManager(initiatorConnection);


        OutputStream outputStream = initiatorByteStreamManager.establishSession(
                        targetConnection.getUser()).getOutputStream();


        // verify stream
        outputStream.write(data);
        outputStream.flush();

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager

        Random rand = new Random();
        final byte[] data = new byte[dataSize];
        rand.nextBytes(data);
        final SynchronousQueue<byte[]> queue = new SynchronousQueue<byte[]>();


        InBandBytestreamManager targetByteStreamManager = InBandBytestreamManager.getByteStreamManager(targetConnection);


        InBandBytestreamListener incomingByteStreamListener = new InBandBytestreamListener() {


            public void incomingBytestreamRequest(InBandBytestreamRequest request) {
                InputStream inputStream;
                try {
                    inputStream = request.accept().getInputStream();
                    byte[] receivedData = new byte[dataSize];
                    int totalRead = 0;
                    while (totalRead < dataSize) {
                        int read = inputStream.read(receivedData, totalRead, dataSize - totalRead);
                        totalRead += read;
                    }
                    queue.put(receivedData);
                }
                catch (Exception e) {
                    fail(e.getMessage());
                }
            }


        };
        targetByteStreamManager.addIncomingBytestreamListener(incomingByteStreamListener);


        InBandBytestreamManager initiatorByteStreamManager = InBandBytestreamManager.getByteStreamManager(initiatorConnection);
        initiatorByteStreamManager.setStanza(StanzaType.MESSAGE);


        OutputStream outputStream = initiatorByteStreamManager.establishSession(
                        targetConnection.getUser()).getOutputStream();


        // verify stream
        outputStream.write(data);
        outputStream.flush();

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager


        // mock connection
        Connection connection = mock(Connection.class);


        // initialize InBandBytestreamManager to get the DataListener
        InBandBytestreamManager byteStreamManager = InBandBytestreamManager.getByteStreamManager(connection);


        // get the DataListener from InBandByteStreamManager
        DataListener dataListener = Whitebox.getInternalState(byteStreamManager,
                        DataListener.class);

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager


        // mock connection
        Connection connection = mock(Connection.class);


        // initialize InBandBytestreamManager to get the CloseListener
        InBandBytestreamManager byteStreamManager = InBandBytestreamManager.getByteStreamManager(connection);


        // get the CloseListener from InBandByteStreamManager
        CloseListener closeListener = Whitebox.getInternalState(byteStreamManager,
                        CloseListener.class);

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager

        // mock two connections
        Connection connection1 = mock(Connection.class);
        Connection connection2 = mock(Connection.class);


        // get bytestream manager for the first connection twice
        InBandBytestreamManager conn1ByteStreamManager1 = InBandBytestreamManager.getByteStreamManager(connection1);
        InBandBytestreamManager conn1ByteStreamManager2 = InBandBytestreamManager.getByteStreamManager(connection1);


        // get bytestream manager for second connection
        InBandBytestreamManager conn2ByteStreamManager1 = InBandBytestreamManager.getByteStreamManager(connection2);


        // assertions
        assertEquals(conn1ByteStreamManager1, conn1ByteStreamManager2);
        assertNotSame(conn1ByteStreamManager1, conn2ByteStreamManager1);

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager

     * throw an exception if the given target does not support in-band
     * bytestream.
     */
    @Test
    public void shouldFailIfTargetDoesNotSupportIBB() {
        InBandBytestreamManager byteStreamManager = InBandBytestreamManager.getByteStreamManager(connection);


        try {
            XMPPError xmppError = new XMPPError(
                            XMPPError.Condition.feature_not_implemented);
            IQ errorIQ = IBBPacketUtils.createErrorIQ(targetJID, initiatorJID, xmppError);
            protocol.addResponse(errorIQ);


            // start In-Band Bytestream
            byteStreamManager.establishSession(targetJID);


            fail("exception should be thrown");
        }
        catch (XMPPException e) {
            assertEquals(XMPPError.Condition.feature_not_implemented.toString(),

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager


    }


    @Test(expected = IllegalArgumentException.class)
    public void shouldNotAllowTooBigDefaultBlockSize() {
        InBandBytestreamManager byteStreamManager = InBandBytestreamManager.getByteStreamManager(connection);
        byteStreamManager.setDefaultBlockSize(1000000);
    }

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager

        byteStreamManager.setDefaultBlockSize(1000000);
    }


    @Test
    public void shouldCorrectlySetDefaultBlockSize() {
        InBandBytestreamManager byteStreamManager = InBandBytestreamManager.getByteStreamManager(connection);
        byteStreamManager.setDefaultBlockSize(1024);
        assertEquals(1024, byteStreamManager.getDefaultBlockSize());
    }

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager

        assertEquals(1024, byteStreamManager.getDefaultBlockSize());
    }


    @Test(expected = IllegalArgumentException.class)
    public void shouldNotAllowTooBigMaximumBlockSize() {
        InBandBytestreamManager byteStreamManager = InBandBytestreamManager.getByteStreamManager(connection);
        byteStreamManager.setMaximumBlockSize(1000000);
    }

View Full Code Here

Examples of org.jivesoftware.smackx.bytestreams.ibb.InBandBytestreamManager

        byteStreamManager.setMaximumBlockSize(1000000);
    }


    @Test
    public void shouldCorrectlySetMaximumBlockSize() {
        InBandBytestreamManager byteStreamManager = InBandBytestreamManager.getByteStreamManager(connection);
        byteStreamManager.setMaximumBlockSize(1024);
        assertEquals(1024, byteStreamManager.getMaximumBlockSize());
    }

View Full Code Here

0 1

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.