Examples of CSeqHeader

javax.sip.header.CSeqHeader
A CSeq header field in a request contains a single decimal sequence number and the request method. The CSeq header field serves to identify and order transactions within a dialog, to provide a means to uniquely identify transactions, and to differentiate between new requests and request retransmissions. Two CSeq header fields are considered equal if the sequence number and the request method are identical.
- Method - The method part of CSeq is case-sensitive and MUST match that of the request.
- Sequence number - The sequence number is chosen by the requesting client and is unique within a single value of Call-ID. The sequence number MUST be expressible as a 32-bit unsigned integer and MUST be less than 2**31. For non-REGISTER requests outside of a dialog, the sequence number value is arbitrary. Consecutive Requests that differ in method, headers or body, but have the same CallIdHeader must contain strictly monotonically increasing and contiguous sequence numbers; sequence numbers do not wrap around. Retransmissions of the same Request carry the same sequence number, but an INVITE Request with a different message body or different headers (a "re-invitation") acquires a new, higher sequence number. A server must echo the CSeqHeader from the Request in its Response. If the method value is missing in the received CSeqHeader, the server fills it in appropriately. ACK and CANCEL Requests must contain the same CSeqHeader sequence number (but not method) as the INVITE Request they refer to, while a BYE Request cancelling an invitation must have a higher sequence number. An user agent server must remember the highest sequence number for any INVITE Request with the same CallIdHeader. The server must respond to, and then discard, any INVITE Request with a lower sequence number.
As long as a client follows the above guidelines, it may use any mechanism it would like to select CSeq header field values.
Forked Requests:
Forked Requests must have the same CSeqHeader as there would be ambiguity otherwise between these forked Requests and later BYE Requests issued by the client user agent.
For Example:
CSeq: 4711 INVITE @author BEA Systems, NIST @version 1.2

Examples of javax.sip.header.CSeqHeader


                // Create a new CallId header
                CallIdHeader callIdHeader = sipProvider.getNewCallId();


                // Create a new Cseq header
                CSeqHeader cSeqHeader = headerFactory.createCSeqHeader(1L,
                        Request.INVITE);


                // Create a new MaxForwardsHeader
                MaxForwardsHeader maxForwards = headerFactory
                        .createMaxForwardsHeader(70);

View Full Code Here

Examples of javax.sip.header.CSeqHeader

                    System.out.println("shootme: got an OK response! ");
                    System.out.println("Dialog State = " + dialog.getState());
                    SipProvider provider = (SipProvider) responseEvent.getSource();


                    Request messageRequest = dialog.createRequest(Request.MESSAGE);
                    CSeqHeader cseq = (CSeqHeader)messageRequest.getHeader(CSeqHeader.NAME);


                    // We will test if the CSEq validation is off by sending CSeq 1 again
                    cseq.setSeqNumber(1);
                    ClientTransaction ct = provider
                    .getNewClientTransaction(messageRequest);
                    dialog.sendRequest(ct);


                } catch (Exception ex) {

View Full Code Here

Examples of javax.sip.header.CSeqHeader

                    System.out.println("shootme: got an ACK! ");
                    System.out.println("Dialog State = " + dialog.getState());
                    SipProvider provider = (SipProvider) requestEvent.getSource();


                    Request messageRequest = dialog.createRequest(Request.MESSAGE);
                    CSeqHeader cseq = (CSeqHeader)messageRequest.getHeader(CSeqHeader.NAME);


                    // We will test if the CSEq validation is off by sending CSeq 1 again


                    ClientTransaction ct = provider
                    .getNewClientTransaction(messageRequest);
                    cseq.setSeqNumber(1);
                    ct.sendRequest();


                } catch (Exception ex) {
                    ex.printStackTrace();
                }

View Full Code Here

Examples of javax.sip.header.CSeqHeader


                // Create a new CallId header
                CallIdHeader callIdHeader = sipProvider.getNewCallId();


                // Create a new Cseq header
                CSeqHeader cSeqHeader = headerFactory.createCSeqHeader(1L,
                        Request.INVITE);


                // Create a new MaxForwardsHeader
                MaxForwardsHeader maxForwards = headerFactory
                        .createMaxForwardsHeader(70);

View Full Code Here

Examples of javax.sip.header.CSeqHeader

                    System.out.println("shootme: got an OK response! ");
                    System.out.println("Dialog State = " + dialog.getState());
                    SipProvider provider = (SipProvider) responseEvent.getSource();


                    Request messageRequest = dialog.createRequest(Request.MESSAGE);
                    CSeqHeader cseq = (CSeqHeader)messageRequest.getHeader(CSeqHeader.NAME);


                    // We will test if the CSEq validation is off by sending CSeq 1 again
                    cseq.setSeqNumber(1);
                    ClientTransaction ct = provider
                    .getNewClientTransaction(messageRequest);
                    dialog.sendRequest(ct);


                } catch (Exception ex) {

View Full Code Here

Examples of javax.sip.header.CSeqHeader

                    System.out.println("shootme: got an ACK! ");
                    System.out.println("Dialog State = " + dialog.getState());
                    SipProvider provider = (SipProvider) requestEvent.getSource();


                    Request messageRequest = dialog.createRequest(Request.MESSAGE);
                    CSeqHeader cseq = (CSeqHeader)messageRequest.getHeader(CSeqHeader.NAME);


                    // We will test if the CSEq validation is off by sending CSeq 1 again


                    ClientTransaction ct = provider
                    .getNewClientTransaction(messageRequest);
                    cseq.setSeqNumber(1);
                    ct.sendRequest();


                } catch (Exception ex) {
                    ex.printStackTrace();
                }

View Full Code Here

Examples of javax.sip.header.CSeqHeader

                  + tid + ":\n" + response.getStatusCode() +
                  " cseq = " + response.getHeader(CSeqHeader.NAME) + 
                  " dialog " + responseReceivedEvent.getDialog());
        }


        CSeqHeader cseq = (CSeqHeader) response.getHeader( CSeqHeader.NAME );
        if (cseq.getMethod().equals(Request.INVITE)) {


            try {
                sendNotify( response.getStatusCode(), response.getReasonPhrase() );
            } catch (Exception e1) {
                TestHarness.fail("Failed to send notify, because of " + e1.getMessage());
            }


            if (response.getStatusCode() >= 200 && response.getStatusCode() < 300) {
                try {
                    Request ack = tid.getDialog().createAck( cseq.getSeqNumber() );
                    tid.getDialog().sendAck( ack );


                    // kill it right away
                    if ( tid.getDialog().getState() != DialogState.TERMINATED ) {
                      Request bye = tid.getDialog()

View Full Code Here

Examples of javax.sip.header.CSeqHeader

            // JvB: Make sure that the implementation matches the messagefactory
            callIdHeader = headerFactory.createCallIdHeader( callIdHeader.getCallId() );




            // Create a new Cseq header
            CSeqHeader cSeqHeader = headerFactory.createCSeqHeader(1L,
                    Request.INVITE);


            // Create a new MaxForwardsHeader
            MaxForwardsHeader maxForwards = headerFactory
                    .createMaxForwardsHeader(70);

View Full Code Here

Examples of javax.sip.header.CSeqHeader


            // rfc 3261 says that the cseq header should be augmented for the new
            // request. do it here so that the new dialog (created together with
            // the new client transaction) takes it into account.
            // Bug report - Fredrik Wickstrom
            CSeqHeader cSeq = (CSeqHeader) reoriginatedRequest.getHeader((CSeqHeader.NAME));
            try {
                cSeq.setSeqNumber(cSeq.getSeqNumber() + 1l);
            } catch (InvalidArgumentException ex) {
                throw new SipException("Invalid CSeq -- could not increment : "
                        + cSeq.getSeqNumber());
            }




            /* Resolve this to the next hop based on the previous lookup. If we are not using
             * lose routing (RFC2543) then just attach hop as a maddr param.

View Full Code Here

Examples of javax.sip.header.CSeqHeader


      // Create a new CallId header
      CallIdHeader callIdHeader = callId;
      //callIdHeader.setCallId("1");
      // Create a new Cseq header
      CSeqHeader cSeqHeader = headerFactory.createCSeqHeader(countId, Request.INVITE);


      // Create a new MaxForwardsHeader
      MaxForwardsHeader maxForwards = headerFactory.createMaxForwardsHeader(70);
      // Create the request.
      request = messageFactory.createRequest(requestURI,Request.INVITE,

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.