* popped.
*/
int stackPointer = maxLocals + frame.getStack().size();
// The sources have to be retrieved before super.run() gets called.
RegisterSpecList sources = getSources(opcode, stackPointer);
int sourceCount = sources.size();
super.run(frame, offset, opcode);
SourcePosition pos = method.makeSourcePosistion(offset);
RegisterSpec localTarget = getLocalTarget();
int destCount = resultCount();
RegisterSpec dest;
if (destCount == 0) {
dest = null;
switch (opcode) {
case ByteOps.POP:
case ByteOps.POP2: {
// These simply don't appear in the rop form.
return;
}
}
} else if (localTarget != null) {
dest = localTarget;
} else if (destCount == 1) {
dest = RegisterSpec.make(stackPointer, result(0));
} else {
/*
* This clause only ever applies to the stack manipulation
* ops that have results (that is, dup* and swap but not
* pop*).
*
* What we do is first move all the source registers into
* the "temporary stack" area defined for the method, and
* then move stuff back down onto the main "stack" in the
* arrangement specified by the stack op pattern.
*
* Note: This code ends up emitting a lot of what will
* turn out to be superfluous moves (e.g., moving back and
* forth to the same local when doing a dup); however,
* that makes this code a bit easier (and goodness knows
* it doesn't need any extra complexity), and all the SSA
* stuff is going to want to deal with this sort of
* superfluous assignment anyway, so it should be a wash
* in the end.
*/
int scratchAt = ropper.getFirstTempStackReg();
RegisterSpec[] scratchRegs = new RegisterSpec[sourceCount];
for (int i = 0; i < sourceCount; i++) {
RegisterSpec src = sources.get(i);
TypeBearer type = src.getTypeBearer();
RegisterSpec scratch = src.withReg(scratchAt);
insns.add(new PlainInsn(Rops.opMove(type), pos, scratch, src));
scratchRegs[i] = scratch;
scratchAt += src.getCategory();
}
for (int pattern = getAuxInt(); pattern != 0; pattern >>= 4) {
int which = (pattern & 0x0f) - 1;
RegisterSpec scratch = scratchRegs[which];
TypeBearer type = scratch.getTypeBearer();
insns.add(new PlainInsn(Rops.opMove(type), pos,
scratch.withReg(stackPointer),
scratch));
stackPointer += type.getType().getCategory();
}
return;
}
TypeBearer destType = (dest != null) ? dest : Type.VOID;
Constant cst = getAuxCst();
int ropOpcode;
Rop rop;
Insn insn;
if (opcode == ByteOps.MULTIANEWARRAY) {
blockCanThrow = true;
// Add the extra instructions for handling multianewarray.
extraBlockCount = 6;
/*
* Add an array constructor for the int[] containing all the
* dimensions.
*/
RegisterSpec dimsReg =
RegisterSpec.make(dest.getNextReg(), Type.INT_ARRAY);
rop = Rops.opFilledNewArray(Type.INT_ARRAY, sourceCount);
insn = new ThrowingCstInsn(rop, pos, sources, catches,
CstType.INT_ARRAY);
insns.add(insn);
// Add a move-result for the new-filled-array
rop = Rops.opMoveResult(Type.INT_ARRAY);
insn = new PlainInsn(rop, pos, dimsReg, RegisterSpecList.EMPTY);
insns.add(insn);
/*
* Add a const-class instruction for the specified array
* class.
*/
/*
* Remove as many dimensions from the originally specified
* class as are given in the explicit list of dimensions,
* so as to pass the right component class to the standard
* Java library array constructor.
*/
Type componentType = ((CstType) cst).getClassType();
for (int i = 0; i < sourceCount; i++) {
componentType = componentType.getComponentType();
}
RegisterSpec classReg =
RegisterSpec.make(dest.getReg(), Type.CLASS);
if (componentType.isPrimitive()) {
/*
* The component type is primitive (e.g., int as opposed
* to Integer), so we have to fetch the corresponding
* TYPE class.
*/
CstFieldRef typeField =
CstFieldRef.forPrimitiveType(componentType);
insn = new ThrowingCstInsn(Rops.GET_STATIC_OBJECT, pos,
RegisterSpecList.EMPTY,
catches, typeField);
} else {
/*
* The component type is an object type, so just make a
* normal class reference.
*/
insn = new ThrowingCstInsn(Rops.CONST_OBJECT, pos,
RegisterSpecList.EMPTY, catches,
new CstType(componentType));
}
insns.add(insn);
// Add a move-result-pseudo for the get-static or const
rop = Rops.opMoveResultPseudo(classReg.getType());
insn = new PlainInsn(rop, pos, classReg, RegisterSpecList.EMPTY);
insns.add(insn);
/*
* Add a call to the "multianewarray method," that is,
* Array.newInstance(class, dims). Note: The result type
* of newInstance() is Object, which is why the last
* instruction in this sequence is a cast to the right
* type for the original instruction.
*/
RegisterSpec objectReg =
RegisterSpec.make(dest.getReg(), Type.OBJECT);
insn = new ThrowingCstInsn(
Rops.opInvokeStatic(MULTIANEWARRAY_METHOD.getPrototype()),
pos, RegisterSpecList.make(classReg, dimsReg),
catches, MULTIANEWARRAY_METHOD);
insns.add(insn);
// Add a move-result.
rop = Rops.opMoveResult(MULTIANEWARRAY_METHOD.getPrototype()
.getReturnType());
insn = new PlainInsn(rop, pos, objectReg, RegisterSpecList.EMPTY);
insns.add(insn);
/*
* And finally, set up for the remainder of this method to
* add an appropriate cast.
*/
opcode = ByteOps.CHECKCAST;
sources = RegisterSpecList.make(objectReg);
} else if (opcode == ByteOps.JSR) {
// JSR has no Rop instruction
hasJsr = true;
return;
} else if (opcode == ByteOps.RET) {
try {
returnAddress = (ReturnAddress)arg(0);
} catch (ClassCastException ex) {
throw new RuntimeException(
"Argument to RET was not a ReturnAddress", ex);
}
// RET has no Rop instruction.
return;
}
ropOpcode = jopToRopOpcode(opcode, cst);
rop = Rops.ropFor(ropOpcode, destType, sources, cst);
Insn moveResult = null;
if (dest != null && rop.isCallLike()) {
/*
* We're going to want to have a move-result in the next
* basic block.
*/
extraBlockCount++;
moveResult = new PlainInsn(
Rops.opMoveResult(((CstBaseMethodRef) cst).getPrototype()
.getReturnType()), pos, dest, RegisterSpecList.EMPTY);
dest = null;
} else if (dest != null && rop.canThrow()) {
/*
* We're going to want to have a move-result-pseudo in the
* next basic block.
*/
extraBlockCount++;
moveResult = new PlainInsn(
Rops.opMoveResultPseudo(dest.getTypeBearer()),
pos, dest, RegisterSpecList.EMPTY);
dest = null;
}
if (ropOpcode == RegOps.NEW_ARRAY) {
/*
* In the original bytecode, this was either a primitive
* array constructor "newarray" or an object array
* constructor "anewarray". In the former case, there is
* no explicit constant, and in the latter, the constant
* is for the element type and not the array type. The rop
* instruction form for both of these is supposed to be
* the resulting array type, so we initialize / alter
* "cst" here, accordingly. Conveniently enough, the rop
* opcode already gets constructed with the proper array
* type.
*/
cst = CstType.intern(rop.getResult());
} else if ((cst == null) && (sourceCount == 2)) {
TypeBearer lastType = sources.get(1).getTypeBearer();
if (lastType.isConstant()
&& advice.hasConstantOperation(rop,
sources.get(0), sources.get(1))) {
/*
* The target architecture has an instruction that can
* build in the constant found in the second argument,
* so pull it out of the sources and just use it as a
* constant here.
*/
cst = (Constant) lastType;
sources = sources.withoutLast();
rop = Rops.ropFor(ropOpcode, destType, sources, cst);
}
}
SwitchList cases = getAuxCases();
ArrayList<Constant> initValues = getInitValues();
boolean canThrow = rop.canThrow();
blockCanThrow |= canThrow;
if (cases != null) {
if (cases.size() == 0) {
// It's a default-only switch statement. It can happen!
insn = new PlainInsn(Rops.GOTO, pos, null,
RegisterSpecList.EMPTY);
primarySuccessorIndex = 0;
} else {
IntList values = cases.getValues();
insn = new SwitchInsn(rop, pos, dest, sources, values);
primarySuccessorIndex = values.size();
}
} else if (ropOpcode == RegOps.RETURN) {
/*
* Returns get turned into the combination of a move (if
* non-void and if the return doesn't already mention
* register 0) and a goto (to the return block).
*/
if (sources.size() != 0) {
RegisterSpec source = sources.get(0);
TypeBearer type = source.getTypeBearer();
if (source.getReg() != 0) {
insns.add(new PlainInsn(Rops.opMove(type), pos,
RegisterSpec.make(0, type),
source));