Examples of ARP

com.hp.hpl.jena.rdf.arp.ARP
Another RDF Parser. To load an RDF file:
1. Create an ARP.
2. Set its handlers, by calling the {@link #getHandlers}method, and then.
3. Call a load method.
Xerces is used for parsing the XML. The SAXEvents generated by Xerces are then analysed as RDF by ARP. Errors may occur in either the XML or the RDF part, see {@link ARPHandlers#setErrorHandler} for detailsof how to distinguish between them.

For very large files, ARP does not use any additional memory except when either the {@link ExtendedHandler#discardNodesWithNodeID}returns false or when the {@link AResource#setUserData} method has beenused. In these cases ARP needs to remember the rdf:nodeID usage through the file life time.

See ARP documentation for more information.
Includes contributions from Simon Raboczi and Andrew Newman
net.floodlightcontroller.packet.ARP
@author David Erickson (daviderickson@cs.stanford.edu)
org.hyperic.sigar.Arp
org.jnetpcap.protocol.network.Arp
Address Resolution Protocol header. ARP is used to translate protocol addresses to hardware interface addresses. @author Mark Bednarczyk @author Sly Technologies, Inc.

Examples of net.floodlightcontroller.packet.ARP

        IPacket testPacket = new Ethernet()
        .setSourceMACAddress("00:44:33:22:11:00")
        .setDestinationMACAddress("00:11:22:33:44:55")
        .setEtherType(Ethernet.TYPE_ARP)
        .setPayload(
                new ARP()
                .setHardwareType(ARP.HW_TYPE_ETHERNET)
                .setProtocolType(ARP.PROTO_TYPE_IP)
                .setHardwareAddressLength((byte) 6)
                .setProtocolAddressLength((byte) 4)
                .setOpCode(ARP.OP_REPLY)

View Full Code Here

Examples of net.floodlightcontroller.packet.ARP

        .setSourceMACAddress("00:44:33:22:11:01")
        .setDestinationMACAddress("00:11:22:33:44:55")
        .setEtherType(Ethernet.TYPE_ARP)
        .setVlanID((short)5)
        .setPayload(
                    new ARP()
                    .setHardwareType(ARP.HW_TYPE_ETHERNET)
                    .setProtocolType(ARP.PROTO_TYPE_IP)
                    .setHardwareAddressLength((byte) 6)
                    .setProtocolAddressLength((byte) 4)
                    .setOpCode(ARP.OP_REPLY)
                    .setSenderHardwareAddress(Ethernet.toMACAddress("00:44:33:22:11:01"))
                    .setSenderProtocolAddress(IPv4.toIPv4AddressBytes("192.168.1.1"))
                    .setTargetHardwareAddress(Ethernet.toMACAddress("00:11:22:33:44:55"))
                    .setTargetProtocolAddress(IPv4.toIPv4AddressBytes("192.168.1.2")));
        this.testARPReplyPacket_1_Srld = testARPReplyPacket_1.serialize();


        // Another test packet with the same ARP payload as packet 1 but with
        // a different source MAC. (i.e., sender MAC and source MAC differ)
        this.testARPReplyPacket_2 = new Ethernet()
        .setSourceMACAddress("00:99:88:77:66:55")
        .setDestinationMACAddress("00:11:22:33:44:55")
        .setEtherType(Ethernet.TYPE_ARP)
        .setVlanID((short)5)
        .setPayload(
                    new ARP()
                    .setHardwareType(ARP.HW_TYPE_ETHERNET)
                    .setProtocolType(ARP.PROTO_TYPE_IP)
                    .setHardwareAddressLength((byte) 6)
                    .setProtocolAddressLength((byte) 4)
                    .setOpCode(ARP.OP_REPLY)

View Full Code Here

Examples of net.floodlightcontroller.packet.ARP

     *
     * @throws Exception
     */
    @Test
    public void testDeviceLearningFromArpResponseData() throws Exception {
        ARP arp = (ARP)((Ethernet)this.testARPReplyPacket_2).getPayload();
        long senderMac = Ethernet.toLong(arp.getSenderHardwareAddress());
        long sourceMac =
                Ethernet.toLong(((Ethernet)this.testARPReplyPacket_2)
                                .getSourceMACAddress());
        Integer ipaddr = IPv4.toIPv4Address("192.168.1.1");
        OFPacketIn packetIn = testARPReplyPacketIn_2;

View Full Code Here

Examples of org.hyperic.sigar.Arp


    public void testCreate() throws Exception {
        try {
            Arp[] entries = getSigar().getArpList();
            for (int i=0; i<entries.length; i++) {
                Arp arp = entries[i];
                assertTrueTrace("Address", arp.getAddress());
                assertTrueTrace("Ifname", arp.getIfname());
                assertTrueTrace("Hwaddr", arp.getHwaddr());
                assertTrueTrace("Type", arp.getType());
                traceln("Flags=" + arp.getFlags());
            }
        } catch (SigarNotImplementedException e) {
            return;
        } catch (SigarException e) {
            return;

View Full Code Here

Examples of org.jnetpcap.protocol.network.Arp

  public void testArp() {
    JPacket packet = super.getPcapPacket(VLAN, 189 - 1);
    
    assertTrue(packet.hasHeader(JProtocol.ARP_ID));
    
    Arp arp = new Arp();
    assertTrue(packet.hasHeader(arp));
    assertEquals(Arp.OpCode.REQUEST, arp.operationEnum());
    System.out.println(packet);
  }

View Full Code Here

0 1

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.