/*
* @(#)StandardAttributeFactory
*
* Copyright 2004-2006 Sun Microsystems, Inc. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistribution of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistribution in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Sun Microsystems, Inc. or the names of contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING
* ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
* OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN MICROSYSTEMS, INC. ("SUN")
* AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE
* AS A RESULT OF USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS
* DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST
* REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL,
* INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY
* OF LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
* EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
*
* You acknowledge that this software is not designed or intended for use in
* the design, construction, operation or maintenance of any nuclear facility.
*/
package org.jboss.security.xacml.sunxacml.attr;
import java.util.Collections;
import java.util.HashMap;
import java.util.Set;
import java.util.logging.Logger;
import org.jboss.security.xacml.sunxacml.PolicyMetaData;
import org.jboss.security.xacml.sunxacml.UnknownIdentifierException;
import org.jboss.security.xacml.sunxacml.attr.proxy.AnyURIAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.Base64BinaryAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.BooleanAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.DNSNameAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.DateAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.DateTimeAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.DayTimeDurationAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.DoubleAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.HexBinaryAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.IPAddressAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.IntegerAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.RFC822NameAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.StringAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.TimeAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.X500NameAttributeProxy;
import org.jboss.security.xacml.sunxacml.attr.proxy.YearMonthDurationAttributeProxy;
/**
* This factory supports the standard set of datatypes specified in XACML
* 1.x and 2.0. It is the default factory used by the system, and imposes
* a singleton pattern insuring that there is only ever one instance of
* this class.
* <p>
* Note that because this supports only the standard datatypes, this
* factory does not allow the addition of any other datatypes. If you call
* <code>addDatatype</code> on an instance of this class, an exception
* will be thrown. If you need a standard factory that is modifiable, you
* should create a new <code>BaseAttributeFactory</code> (or some other
* <code>AttributeFactory</code>) and configure it with the standard
* datatypes using <code>addStandardDatatypes</code> (or, in the case of
* <code>BaseAttributeFactory</code>, by providing the datatypes in the
* constructor).
*
* @since 1.2
* @author Seth Proctor
*/
public class StandardAttributeFactory extends BaseAttributeFactory
{
// the one instance of this factory
private static StandardAttributeFactory factoryInstance = null;
// the datatypes supported by this factory
private static HashMap supportedDatatypes = null;
// the supported identifiers for each version of XACML
private static Set supportedV1Identifiers;
private static Set supportedV2Identifiers;
// the logger we'll use for all messages
private static final Logger logger =
Logger.getLogger(StandardAttributeFactory.class.getName());
/**
* Private constructor that sets up proxies for all of the standard
* datatypes.
*/
private StandardAttributeFactory() {
super(supportedDatatypes);
}
/**
* Private initializer for the supported datatypes. This isn't called
* until something needs these values, and is only called once.
*/
private static void initDatatypes() {
logger.config("Initializing standard datatypes");
supportedDatatypes = new HashMap();
// the 1.x datatypes
supportedDatatypes.put(BooleanAttribute.identifier,
new BooleanAttributeProxy());
supportedDatatypes.put(StringAttribute.identifier,
new StringAttributeProxy());
supportedDatatypes.put(DateAttribute.identifier,
new DateAttributeProxy());
supportedDatatypes.put(TimeAttribute.identifier,
new TimeAttributeProxy());
supportedDatatypes.put(DateTimeAttribute.identifier,
new DateTimeAttributeProxy());
supportedDatatypes.put(DayTimeDurationAttribute.identifier,
new DayTimeDurationAttributeProxy());
supportedDatatypes.put(YearMonthDurationAttribute.identifier,
new YearMonthDurationAttributeProxy());
supportedDatatypes.put(DoubleAttribute.identifier,
new DoubleAttributeProxy());
supportedDatatypes.put(IntegerAttribute.identifier,
new IntegerAttributeProxy());
supportedDatatypes.put(AnyURIAttribute.identifier,
new AnyURIAttributeProxy());
supportedDatatypes.put(HexBinaryAttribute.identifier,
new HexBinaryAttributeProxy());
supportedDatatypes.put(Base64BinaryAttribute.identifier,
new Base64BinaryAttributeProxy());
supportedDatatypes.put(X500NameAttribute.identifier,
new X500NameAttributeProxy());
supportedDatatypes.put(RFC822NameAttribute.identifier,
new RFC822NameAttributeProxy());
supportedV1Identifiers =
Collections.unmodifiableSet(supportedDatatypes.keySet());
// the 2.0 datatypes
supportedDatatypes.put(DNSNameAttribute.identifier,
new DNSNameAttributeProxy());
supportedDatatypes.put(IPAddressAttribute.identifier,
new IPAddressAttributeProxy());
supportedV2Identifiers =
Collections.unmodifiableSet(supportedDatatypes.keySet());
}
/**
* Returns an instance of this factory. This method enforces a singleton
* model, meaning that this always returns the same instance, creating
* the factory if it hasn't been requested before. This is the default
* model used by the <code>AttributeFactory</code>, ensuring quick
* access to this factory.
*
* @return the factory instance
*/
public static StandardAttributeFactory getFactory() {
if (factoryInstance == null) {
synchronized (StandardAttributeFactory.class) {
if (factoryInstance == null) {
initDatatypes();
factoryInstance = new StandardAttributeFactory();
}
}
}
return factoryInstance;
}
/**
* A convenience method that returns a new instance of an
* <codeAttributeFactory</code> that supports all of the standard
* datatypes. The new factory allows adding support for new datatypes.
* This method should only be used when you need a new, mutable instance
* (eg, when you want to create a new factory that extends the set of
* supported datatypes). In general, you should use
* <code>getFactory</code> which is more efficient and enforces a
* singleton pattern.
*
* @return a new factory supporting the standard datatypes
*/
public static AttributeFactory getNewFactory() {
// first we make sure that everything has been initialized...
getFactory();
// ...then we create the new instance
return new BaseAttributeFactory(supportedDatatypes);
}
/**
* Returns the identifiers supported for the given version of XACML.
* Because this factory supports identifiers from all versions of the
* XACML specifications, this method is useful for getting a list of
* which specific identifiers are supported by a given version of XACML.
*
* @param xacmlVersion a standard XACML identifier string, as provided
* in <code>PolicyMetaData</code>
*
* @return a <code>Set</code> of identifiers
*
* @throws UnknownIdentifierException if the version string is unknown
*/
public static Set getStandardDatatypes(String xacmlVersion)
throws UnknownIdentifierException
{
if (xacmlVersion.equals(PolicyMetaData.XACML_1_0_IDENTIFIER)) {
return supportedV1Identifiers;
} else if (xacmlVersion.equals(PolicyMetaData.XACML_2_0_IDENTIFIER)) {
return supportedV2Identifiers;
}
throw new UnknownIdentifierException("Unknown XACML version: " +
xacmlVersion);
}
/**
* Throws an <code>UnsupportedOperationException</code> since you are not
* allowed to modify what a standard factory supports.
*
* @param id the name of the attribute type
* @param proxy the proxy used to create new attributes of the given type
*
* @throws UnsupportedOperationException always
*/
public void addDatatype(String id, AttributeProxy proxy) {
throw new UnsupportedOperationException("a standard factory cannot " +
"support new datatypes");
}
}