/**
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.cassandra.db;
import java.io.*;
import java.util.*;
import org.apache.cassandra.config.DatabaseDescriptor;
import org.apache.cassandra.io.DataInputBuffer;
import org.apache.cassandra.io.DataOutputBuffer;
import org.apache.cassandra.io.IFileReader;
import org.apache.cassandra.io.IFileWriter;
import org.apache.cassandra.io.SequenceFile;
import org.apache.cassandra.utils.FBUtilities;
import org.apache.cassandra.utils.FileUtils;
import org.apache.cassandra.utils.LogUtil;
import org.apache.log4j.Logger;
import java.util.concurrent.locks.Lock;
import java.util.concurrent.locks.ReentrantLock;
import org.apache.commons.lang.StringUtils;
/*
* Commit Log tracks every write operation into the system. The aim
* of the commit log is to be able to successfully recover data that was
* not stored to disk via the Memtable. Every Commit Log maintains a
* header represented by the abstraction CommitLogHeader. The header
* contains a bit array and an array of longs and both the arrays are
* of size, #column families for the Table, the Commit Log represents.
* Whenever a ColumnFamily is written to, for the first time its bit flag
* is set to one in the CommitLogHeader. When it is flushed to disk by the
* Memtable its corresponding bit in the header is set to zero. This helps
* track which CommitLogs can be thrown away as a result of Memtable flushes.
* However if a ColumnFamily is flushed and again written to disk then its
* entry in the array of longs is updated with the offset in the Commit Log
* file where it was written. This helps speed up recovery since we can seek
* to these offsets and start processing the commit log.
* Every Commit Log is rolled over everytime it reaches its threshold in size.
* Over time there could be a number of commit logs that would be generated.
* Hovever whenever we flush a column family disk and update its bit flag we
* take this bit array and bitwise & it with the headers of the other commit
* logs that are older.
*
* Author : Avinash Lakshman ( alakshman@facebook.com) & Prashant Malik ( pmalik@facebook.com )
*/
public class CommitLog
{
private static final int bufSize_ = 128*1024*1024;
private static Map<String, CommitLog> instances_ = new HashMap<String, CommitLog>();
private static Lock lock_ = new ReentrantLock();
private static Logger logger_ = Logger.getLogger(CommitLog.class);
private static Map<String, CommitLogHeader> clHeaders_ = new HashMap<String, CommitLogHeader>();
public static final class CommitLogContext
{
static CommitLogContext NULL = new CommitLogContext(null, -1L);
/* Commit Log associated with this operation */
private String file_;
/* Offset within the Commit Log where this row as added */
private long position_;
public CommitLogContext(String file, long position)
{
file_ = file;
position_ = position;
}
boolean isValidContext()
{
return (position_ != -1L);
}
String file()
{
return file_;
}
long position()
{
return position_;
}
}
public static class CommitLogFileComparator implements Comparator<String>
{
public int compare(String f, String f2)
{
return (int)(getCreationTime(f) - getCreationTime(f2));
}
public boolean equals(Object o)
{
if ( !(o instanceof CommitLogFileComparator) )
return false;
return true;
}
}
static long getCreationTime(String file)
{
String[] entries = FBUtilities.strip(file, "-.");
return Long.parseLong(entries[entries.length - 2]);
}
/*
* Write the serialized commit log header into the specified commit log.
*/
private static void writeCommitLogHeader(String commitLogFileName, byte[] bytes) throws IOException
{
IFileWriter logWriter = CommitLog.createWriter(commitLogFileName);
logWriter.seek(0L);
/* write the commit log header */
logWriter.writeDirect(bytes);
logWriter.close();
}
private static IFileWriter createWriter(String file) throws IOException
{
if ( DatabaseDescriptor.isFastSync() )
{
/* Add this to the threshold */
int bufSize = 4*1024*1024;
return SequenceFile.fastWriter(file, CommitLog.bufSize_ + bufSize);
}
else
return SequenceFile.writer(file);
}
static CommitLog open(String table) throws IOException
{
CommitLog commitLog = instances_.get(table);
if ( commitLog == null )
{
CommitLog.lock_.lock();
try
{
commitLog = instances_.get(table);
if ( commitLog == null )
{
commitLog = new CommitLog(table, false);
instances_.put(table, commitLog);
}
}
finally
{
CommitLog.lock_.unlock();
}
}
return commitLog;
}
static String getTableName(String file)
{
String[] values = file.split("-");
return values[1];
}
private String table_;
/* Current commit log file */
private String logFile_;
/* header for current commit log */
private CommitLogHeader clHeader_;
private IFileWriter logWriter_;
private long commitHeaderStartPos_;
/* Force rollover the commit log on the next insert */
private boolean forcedRollOver_ = false;
/*
* Generates a file name of the format CommitLog-<table>-<timestamp>.log in the
* directory specified by the Database Descriptor.
*/
private void setNextFileName()
{
logFile_ = DatabaseDescriptor.getLogFileLocation() +
System.getProperty("file.separator") +
"CommitLog-" +
table_ +
"-" +
System.currentTimeMillis() +
".log";
}
/*
* param @ table - name of table for which we are maintaining
* this commit log.
* param @ recoverymode - is commit log being instantiated in
* in recovery mode.
*/
CommitLog(String table, boolean recoveryMode) throws IOException
{
table_ = table;
if ( !recoveryMode )
{
setNextFileName();
logWriter_ = CommitLog.createWriter(logFile_);
writeCommitLogHeader();
}
}
/*
* This ctor is currently used only for debugging. We
* are now using it to modify the header so that recovery
* can be tested in as many scenarios as we could imagine.
*
* param @ logFile - logfile which we wish to modify.
*/
CommitLog(File logFile) throws IOException
{
table_ = CommitLog.getTableName(logFile.getName());
logFile_ = logFile.getAbsolutePath();
logWriter_ = CommitLog.createWriter(logFile_);
commitHeaderStartPos_ = 0L;
}
String getLogFile()
{
return logFile_;
}
void readCommitLogHeader(String logFile, byte[] bytes) throws IOException
{
IFileReader logReader = SequenceFile.reader(logFile);
try
{
logReader.readDirect(bytes);
}
finally
{
logReader.close();
}
}
/*
* This is invoked on startup via the ctor. It basically
* writes a header with all bits set to zero.
*/
private void writeCommitLogHeader() throws IOException
{
Table table = Table.open(table_);
int cfSize = table.getNumberOfColumnFamilies();
/* record the beginning of the commit header */
commitHeaderStartPos_ = logWriter_.getCurrentPosition();
/* write the commit log header */
clHeader_ = new CommitLogHeader(cfSize);
writeCommitLogHeader(clHeader_.toByteArray(), false);
}
private void writeCommitLogHeader(byte[] bytes, boolean reset) throws IOException
{
/* record the current position */
long currentPos = logWriter_.getCurrentPosition();
logWriter_.seek(commitHeaderStartPos_);
/* write the commit log header */
logWriter_.writeDirect(bytes);
if ( reset )
{
/* seek back to the old position */
logWriter_.seek(currentPos);
}
}
void recover(List<File> clogs) throws IOException
{
Table table = Table.open(table_);
int cfSize = table.getNumberOfColumnFamilies();
int size = CommitLogHeader.size(cfSize);
byte[] header = new byte[size];
byte[] header2 = new byte[size];
int index = clogs.size() - 1;
File file = clogs.get(index);
readCommitLogHeader(file.getAbsolutePath(), header);
Stack<File> filesNeeded = new Stack<File>();
filesNeeded.push(file);
/*
* Identify files that we need for processing. This can be done
* using the information in the header of each file. Simply and
* the byte[] (which are the headers) and stop at the file where
* the result is a zero.
*/
for ( int i = (index - 1); i >= 0; --i )
{
file = clogs.get(i);
readCommitLogHeader(file.getAbsolutePath(), header2);
byte[] result = CommitLogHeader.and(header, header2);
if (CommitLogHeader.isZero(result))
break;
filesNeeded.push(file);
}
logger_.info("Replaying logs from " + StringUtils.join(filesNeeded, ", "));
doRecovery(filesNeeded, header);
}
private void printHeader(byte[] header)
{
StringBuilder sb = new StringBuilder("");
for ( byte b : header )
{
sb.append(b);
sb.append(" ");
}
logger_.debug(sb.toString());
}
private void doRecovery(Stack<File> filesNeeded, byte[] header) throws IOException
{
Table table = Table.open(table_);
DataInputBuffer bufIn = new DataInputBuffer();
DataOutputBuffer bufOut = new DataOutputBuffer();
while ( !filesNeeded.isEmpty() )
{
File file = filesNeeded.pop();
// IFileReader reader = SequenceFile.bufferedReader(file.getAbsolutePath(), DatabaseDescriptor.getLogFileSizeThreshold());
IFileReader reader = SequenceFile.reader(file.getAbsolutePath());
try
{
reader.readDirect(header);
/* deserialize the commit log header */
bufIn.reset(header, 0, header.length);
CommitLogHeader clHeader = CommitLogHeader.serializer().deserialize(bufIn);
/* seek to the lowest position */
int lowPos = CommitLogHeader.getLowestPosition(clHeader);
/*
* If lowPos == 0 then we need to skip the processing of this
* file.
*/
if (lowPos == 0)
break;
else
reader.seek(lowPos);
/* read the logs populate RowMutation and apply */
while ( !reader.isEOF() )
{
bufOut.reset();
long bytesRead = reader.next(bufOut);
if ( bytesRead == -1 )
break;
bufIn.reset(bufOut.getData(), bufOut.getLength());
/* Skip over the commit log key portion */
bufIn.readUTF();
/* Skip over data size */
bufIn.readInt();
/* read the commit log entry */
try
{
Row row = Row.serializer().deserialize(bufIn);
Map<String, ColumnFamily> columnFamilies = new HashMap<String, ColumnFamily>(row.getColumnFamilyMap());
/* remove column families that have already been flushed */
Set<String> cNames = columnFamilies.keySet();
for ( String cName : cNames )
{
ColumnFamily columnFamily = columnFamilies.get(cName);
/* TODO: Remove this to not process Hints */
if ( !DatabaseDescriptor.isApplicationColumnFamily(cName) )
{
row.removeColumnFamily(columnFamily);
continue;
}
int id = table.getColumnFamilyId(columnFamily.name());
if ( clHeader.get(id) == 0 || reader.getCurrentPosition() < clHeader.getPosition(id) )
row.removeColumnFamily(columnFamily);
}
if ( !row.isEmpty() )
{
table.applyNow(row);
}
}
catch ( IOException e )
{
logger_.debug( LogUtil.throwableToString(e) );
}
}
reader.close();
/* apply the rows read */
table.flush(true);
}
catch ( Throwable th )
{
logger_.info( LogUtil.throwableToString(th) );
/* close the reader and delete this commit log. */
reader.close();
FileUtils.delete( new File[]{file} );
}
}
}
/*
* Update the header of the commit log if a new column family
* is encountered for the first time.
*/
private void updateHeader(Row row) throws IOException
{
Map<String, ColumnFamily> columnFamilies = row.getColumnFamilyMap();
Table table = Table.open(table_);
Set<String> cNames = columnFamilies.keySet();
for ( String cName : cNames )
{
ColumnFamily columnFamily = columnFamilies.get(cName);
int id = table.getColumnFamilyId(columnFamily.name());
if ( clHeader_.get(id) == 0 || ( clHeader_.get(id) == 1 && clHeader_.getPosition(id) == 0 ) )
{
if ( clHeader_.get(id) == 0 || ( clHeader_.get(id) == 1 && clHeader_.getPosition(id) == 0 ) )
{
clHeader_.turnOn( id, logWriter_.getCurrentPosition() );
writeCommitLogHeader(clHeader_.toByteArray(), true);
}
}
}
}
CommitLogContext getContext() throws IOException
{
return new CommitLogContext(logFile_, logWriter_.getCurrentPosition());
}
/*
* Adds the specified row to the commit log. This method will reset the
* file offset to what it is before the start of the operation in case
* of any problems. This way we can assume that the subsequent commit log
* entry will override the garbage left over by the previous write.
*/
synchronized CommitLogContext add(Row row) throws IOException
{
long currentPosition = -1L;
CommitLogContext cLogCtx = null;
DataOutputBuffer cfBuffer = new DataOutputBuffer();
long fileSize = 0L;
try
{
/* serialize the row */
cfBuffer.reset();
Row.serializer().serialize(row, cfBuffer);
currentPosition = logWriter_.getCurrentPosition();
cLogCtx = new CommitLogContext(logFile_, currentPosition);
/* Update the header */
updateHeader(row);
logWriter_.append(table_, cfBuffer);
fileSize = logWriter_.getFileSize();
checkThresholdAndRollLog(fileSize);
}
catch (IOException e)
{
if ( currentPosition != -1 )
logWriter_.seek(currentPosition);
throw e;
}
finally
{
cfBuffer.close();
}
return cLogCtx;
}
/*
* This is called on Memtable flush to add to the commit log
* a token indicating that this column family has been flushed.
* The bit flag associated with this column family is set in the
* header and this is used to decide if the log file can be deleted.
*/
synchronized void onMemtableFlush(String cf, CommitLog.CommitLogContext cLogCtx) throws IOException
{
Table table = Table.open(table_);
int id = table.getColumnFamilyId(cf);
/* trying discarding old commit log files */
discard(cLogCtx, id);
}
/*
* Check if old commit logs can be deleted. However we cannot
* do this anymore in the Fast Sync mode and hence I think we
* should get rid of Fast Sync mode altogether. If there is
* a pathological event where few CF's are rarely being updated
* then their Memtable never gets flushed.
* This will prevent commit logs from being deleted. WE NEED to
* fix this using some hueristic and force flushing such Memtables.
*
* param @ cLogCtx The commitLog context .
* param @ id id of the columnFamily being flushed to disk.
*
*/
private void discard(CommitLog.CommitLogContext cLogCtx, int id) throws IOException
{
/* retrieve the commit log header associated with the file in the context */
CommitLogHeader commitLogHeader = clHeaders_.get(cLogCtx.file());
if(commitLogHeader == null )
{
if( logFile_.equals(cLogCtx.file()) )
{
/* this means we are dealing with the current commit log. */
commitLogHeader = clHeader_;
clHeaders_.put(cLogCtx.file(), clHeader_);
}
else
return;
}
/*
* We do any processing only if there is a change in the position in the context.
* This can happen if an older Memtable's flush comes in after a newer Memtable's
* flush. Right now this cannot happen since Memtables are flushed on a single
* thread.
*/
if ( cLogCtx.position() < commitLogHeader.getPosition(id) )
return;
commitLogHeader.turnOff(id);
/* Sort the commit logs based on creation time */
List<String> oldFiles = new ArrayList<String>(clHeaders_.keySet());
Collections.sort(oldFiles, new CommitLogFileComparator());
List<String> listOfDeletedFiles = new ArrayList<String>();
/*
* Loop through all the commit log files in the history. Now process
* all files that are older than the one in the context. For each of
* these files the header needs to modified by performing a bitwise &
* of the header with the header of the file in the context. If we
* encounter the file in the context in our list of old commit log files
* then we update the header and write it back to the commit log.
*/
for(String oldFile : oldFiles)
{
if(oldFile.equals(cLogCtx.file()))
{
/*
* We need to turn on again. This is because we always keep
* the bit turned on and the position indicates from where the
* commit log needs to be read. When a flush occurs we turn off
* perform & operation and then turn on with the new position.
*/
commitLogHeader.turnOn(id, cLogCtx.position());
writeCommitLogHeader(cLogCtx.file(), commitLogHeader.toByteArray());
break;
}
else
{
CommitLogHeader oldCommitLogHeader = clHeaders_.get(oldFile);
oldCommitLogHeader.and(commitLogHeader);
if(oldCommitLogHeader.isSafeToDelete())
{
logger_.debug("Deleting commit log:"+ oldFile);
FileUtils.deleteAsync(oldFile);
listOfDeletedFiles.add(oldFile);
}
else
{
writeCommitLogHeader(oldFile, oldCommitLogHeader.toByteArray());
}
}
}
for ( String deletedFile : listOfDeletedFiles)
{
clHeaders_.remove(deletedFile);
}
}
private void checkThresholdAndRollLog( long fileSize )
{
try
{
if ( fileSize >= DatabaseDescriptor.getLogFileSizeThreshold() || forcedRollOver_ )
{
if ( logWriter_.getFileSize() >= DatabaseDescriptor.getLogFileSizeThreshold() || forcedRollOver_ )
{
/* Rolls the current log file over to a new one. */
setNextFileName();
String oldLogFile = logWriter_.getFileName();
//history_.add(oldLogFile);
logWriter_.close();
/* point reader/writer to a new commit log file. */
// logWriter_ = SequenceFile.writer(logFile_);
logWriter_ = CommitLog.createWriter(logFile_);
/* squirrel away the old commit log header */
clHeaders_.put(oldLogFile, new CommitLogHeader( clHeader_ ));
/*
* We need to zero out positions because the positions in
* the old file do not make sense in the new one.
*/
clHeader_.zeroPositions();
writeCommitLogHeader(clHeader_.toByteArray(), false);
// Get the list of files in commit log directory if it is greater than a certain number
// Force flush all the column families that way we ensure that a slowly populated column family is not screwing up
// by accumulating the commit logs .
}
}
}
catch ( IOException e )
{
logger_.info(LogUtil.throwableToString(e));
}
finally
{
forcedRollOver_ = false;
}
}
public void setForcedRollOver()
{
forcedRollOver_ = true;
}
public static void main(String[] args) throws Throwable
{
LogUtil.init();
File logDir = new File(DatabaseDescriptor.getLogFileLocation());
File[] files = logDir.listFiles();
Arrays.sort( files, new FileUtils.FileComparator() );
byte[] bytes = new byte[CommitLogHeader.size(Integer.parseInt(args[0]))];
for ( File file : files )
{
CommitLog clog = new CommitLog( file );
clog.readCommitLogHeader(file.getAbsolutePath(), bytes);
DataInputBuffer bufIn = new DataInputBuffer();
bufIn.reset(bytes, 0, bytes.length);
CommitLogHeader clHeader = CommitLogHeader.serializer().deserialize(bufIn);
/*
StringBuilder sb = new StringBuilder("");
for ( byte b : bytes )
{
sb.append(b);
sb.append(" ");
}
*/
System.out.println("FILE:" + file);
System.out.println(clHeader.toString());
}
}
}