/**
* Copyright 2010 The Apache Software Foundation
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.hadoop.hbase.regionserver.wal;
import java.io.DataInput;
import java.io.DataOutput;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.OutputStream;
import java.io.UnsupportedEncodingException;
import java.lang.reflect.InvocationTargetException;
import java.lang.reflect.Method;
import java.net.URLEncoder;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.Collections;
import java.util.LinkedList;
import java.util.List;
import java.util.Map;
import java.util.NavigableSet;
import java.util.SortedMap;
import java.util.TreeMap;
import java.util.TreeSet;
import java.util.UUID;
import java.util.concurrent.ConcurrentSkipListMap;
import java.util.concurrent.CopyOnWriteArrayList;
import java.util.concurrent.atomic.AtomicBoolean;
import java.util.concurrent.atomic.AtomicInteger;
import java.util.concurrent.atomic.AtomicLong;
import java.util.concurrent.locks.Lock;
import java.util.concurrent.locks.ReentrantLock;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
import org.apache.hadoop.conf.Configuration;
import org.apache.hadoop.fs.FSDataOutputStream;
import org.apache.hadoop.fs.FileStatus;
import org.apache.hadoop.fs.FileSystem;
import org.apache.hadoop.fs.Path;
import org.apache.hadoop.fs.PathFilter;
import org.apache.hadoop.fs.Syncable;
import org.apache.hadoop.hbase.HBaseConfiguration;
import org.apache.hadoop.hbase.HConstants;
import org.apache.hadoop.hbase.HRegionInfo;
import org.apache.hadoop.hbase.HTableDescriptor;
import org.apache.hadoop.hbase.KeyValue;
import org.apache.hadoop.hbase.ServerName;
import org.apache.hadoop.hbase.util.Bytes;
import org.apache.hadoop.hbase.util.ClassSize;
import org.apache.hadoop.hbase.util.FSUtils;
import org.apache.hadoop.hbase.util.HasThread;
import org.apache.hadoop.hbase.util.Threads;
import org.apache.hadoop.io.Writable;
import org.apache.hadoop.util.StringUtils;
/**
* HLog stores all the edits to the HStore. Its the hbase write-ahead-log
* implementation.
*
* It performs logfile-rolling, so external callers are not aware that the
* underlying file is being rolled.
*
* <p>
* There is one HLog per RegionServer. All edits for all Regions carried by
* a particular RegionServer are entered first in the HLog.
*
* <p>
* Each HRegion is identified by a unique long <code>int</code>. HRegions do
* not need to declare themselves before using the HLog; they simply include
* their HRegion-id in the <code>append</code> or
* <code>completeCacheFlush</code> calls.
*
* <p>
* An HLog consists of multiple on-disk files, which have a chronological order.
* As data is flushed to other (better) on-disk structures, the log becomes
* obsolete. We can destroy all the log messages for a given HRegion-id up to
* the most-recent CACHEFLUSH message from that HRegion.
*
* <p>
* It's only practical to delete entire files. Thus, we delete an entire on-disk
* file F when all of the messages in F have a log-sequence-id that's older
* (smaller) than the most-recent CACHEFLUSH message for every HRegion that has
* a message in F.
*
* <p>
* Synchronized methods can never execute in parallel. However, between the
* start of a cache flush and the completion point, appends are allowed but log
* rolling is not. To prevent log rolling taking place during this period, a
* separate reentrant lock is used.
*
* <p>To read an HLog, call {@link #getReader(org.apache.hadoop.fs.FileSystem,
* org.apache.hadoop.fs.Path, org.apache.hadoop.conf.Configuration)}.
*
*/
public class HLog implements Syncable {
static final Log LOG = LogFactory.getLog(HLog.class);
public static final byte [] METAFAMILY = Bytes.toBytes("METAFAMILY");
static final byte [] METAROW = Bytes.toBytes("METAROW");
/** File Extension used while splitting an HLog into regions (HBASE-2312) */
public static final String SPLITTING_EXT = "-splitting";
public static final boolean SPLIT_SKIP_ERRORS_DEFAULT = false;
/*
* Name of directory that holds recovered edits written by the wal log
* splitting code, one per region
*/
private static final String RECOVERED_EDITS_DIR = "recovered.edits";
private static final Pattern EDITFILES_NAME_PATTERN =
Pattern.compile("-?[0-9]+");
static final String RECOVERED_LOG_TMPFILE_SUFFIX = ".temp";
private final FileSystem fs;
private final Path dir;
private final Configuration conf;
// Listeners that are called on WAL events.
private List<WALActionsListener> listeners =
new CopyOnWriteArrayList<WALActionsListener>();
private final long optionalFlushInterval;
private final long blocksize;
private final String prefix;
private final AtomicLong unflushedEntries = new AtomicLong(0);
private volatile long syncedTillHere = 0;
private long lastDeferredTxid;
private final Path oldLogDir;
private volatile boolean logRollRunning;
private static Class<? extends Writer> logWriterClass;
private static Class<? extends Reader> logReaderClass;
private WALCoprocessorHost coprocessorHost;
static void resetLogReaderClass() {
HLog.logReaderClass = null;
}
private FSDataOutputStream hdfs_out; // FSDataOutputStream associated with the current SequenceFile.writer
// Minimum tolerable replicas, if the actual value is lower than it,
// rollWriter will be triggered
private int minTolerableReplication;
private Method getNumCurrentReplicas; // refers to DFSOutputStream.getNumCurrentReplicas
final static Object [] NO_ARGS = new Object []{};
public interface Reader {
void init(FileSystem fs, Path path, Configuration c) throws IOException;
void close() throws IOException;
Entry next() throws IOException;
Entry next(Entry reuse) throws IOException;
void seek(long pos) throws IOException;
long getPosition() throws IOException;
}
public interface Writer {
void init(FileSystem fs, Path path, Configuration c) throws IOException;
void close() throws IOException;
void sync() throws IOException;
void append(Entry entry) throws IOException;
long getLength() throws IOException;
}
/*
* Current log file.
*/
Writer writer;
/*
* Map of all log files but the current one.
*/
final SortedMap<Long, Path> outputfiles =
Collections.synchronizedSortedMap(new TreeMap<Long, Path>());
/*
* Map of encoded region names to their most recent sequence/edit id in their
* memstore.
*/
private final ConcurrentSkipListMap<byte [], Long> lastSeqWritten =
new ConcurrentSkipListMap<byte [], Long>(Bytes.BYTES_COMPARATOR);
private volatile boolean closed = false;
private final AtomicLong logSeqNum = new AtomicLong(0);
// The timestamp (in ms) when the log file was created.
private volatile long filenum = -1;
//number of transactions in the current Hlog.
private final AtomicInteger numEntries = new AtomicInteger(0);
// If live datanode count is lower than the default replicas value,
// RollWriter will be triggered in each sync(So the RollWriter will be
// triggered one by one in a short time). Using it as a workaround to slow
// down the roll frequency triggered by checkLowReplication().
private volatile int consecutiveLogRolls = 0;
private final int lowReplicationRollLimit;
// If consecutiveLogRolls is larger than lowReplicationRollLimit,
// then disable the rolling in checkLowReplication().
// Enable it if the replications recover.
private volatile boolean lowReplicationRollEnabled = true;
// If > than this size, roll the log. This is typically 0.95 times the size
// of the default Hdfs block size.
private final long logrollsize;
// This lock prevents starting a log roll during a cache flush.
// synchronized is insufficient because a cache flush spans two method calls.
private final Lock cacheFlushLock = new ReentrantLock();
// We synchronize on updateLock to prevent updates and to prevent a log roll
// during an update
// locked during appends
private final Object updateLock = new Object();
private final Object flushLock = new Object();
private final boolean enabled;
/*
* If more than this many logs, force flush of oldest region to oldest edit
* goes to disk. If too many and we crash, then will take forever replaying.
* Keep the number of logs tidy.
*/
private final int maxLogs;
/**
* Thread that handles optional sync'ing
*/
private final LogSyncer logSyncerThread;
/** Number of log close errors tolerated before we abort */
private final int closeErrorsTolerated;
private final AtomicInteger closeErrorCount = new AtomicInteger();
/**
* Pattern used to validate a HLog file name
*/
private static final Pattern pattern = Pattern.compile(".*\\.\\d*");
static byte [] COMPLETE_CACHE_FLUSH;
static {
try {
COMPLETE_CACHE_FLUSH =
"HBASE::CACHEFLUSH".getBytes(HConstants.UTF8_ENCODING);
} catch (UnsupportedEncodingException e) {
assert(false);
}
}
public static class Metric {
public long min = Long.MAX_VALUE;
public long max = 0;
public long total = 0;
public int count = 0;
synchronized void inc(final long val) {
min = Math.min(min, val);
max = Math.max(max, val);
total += val;
++count;
}
synchronized Metric get() {
Metric copy = new Metric();
copy.min = min;
copy.max = max;
copy.total = total;
copy.count = count;
this.min = Long.MAX_VALUE;
this.max = 0;
this.total = 0;
this.count = 0;
return copy;
}
}
// For measuring latency of writes
private static Metric writeTime = new Metric();
private static Metric writeSize = new Metric();
// For measuring latency of syncs
private static Metric syncTime = new Metric();
//For measuring slow HLog appends
private static AtomicLong slowHLogAppendCount = new AtomicLong();
private static Metric slowHLogAppendTime = new Metric();
public static Metric getWriteTime() {
return writeTime.get();
}
public static Metric getWriteSize() {
return writeSize.get();
}
public static Metric getSyncTime() {
return syncTime.get();
}
public static long getSlowAppendCount() {
return slowHLogAppendCount.get();
}
public static Metric getSlowAppendTime() {
return slowHLogAppendTime.get();
}
/**
* Constructor.
*
* @param fs filesystem handle
* @param dir path to where hlogs are stored
* @param oldLogDir path to where hlogs are archived
* @param conf configuration to use
* @throws IOException
*/
public HLog(final FileSystem fs, final Path dir, final Path oldLogDir,
final Configuration conf)
throws IOException {
this(fs, dir, oldLogDir, conf, null, true, null);
}
/**
* Create an edit log at the given <code>dir</code> location.
*
* You should never have to load an existing log. If there is a log at
* startup, it should have already been processed and deleted by the time the
* HLog object is started up.
*
* @param fs filesystem handle
* @param dir path to where hlogs are stored
* @param oldLogDir path to where hlogs are archived
* @param conf configuration to use
* @param listeners Listeners on WAL events. Listeners passed here will
* be registered before we do anything else; e.g. the
* Constructor {@link #rollWriter()}.
* @param prefix should always be hostname and port in distributed env and
* it will be URL encoded before being used.
* If prefix is null, "hlog" will be used
* @throws IOException
*/
public HLog(final FileSystem fs, final Path dir, final Path oldLogDir,
final Configuration conf, final List<WALActionsListener> listeners,
final String prefix) throws IOException {
this(fs, dir, oldLogDir, conf, listeners, true, prefix);
}
/**
* Create an edit log at the given <code>dir</code> location.
*
* You should never have to load an existing log. If there is a log at
* startup, it should have already been processed and deleted by the time the
* HLog object is started up.
*
* @param fs filesystem handle
* @param dir path to where hlogs are stored
* @param oldLogDir path to where hlogs are archived
* @param conf configuration to use
* @param listeners Listeners on WAL events. Listeners passed here will
* be registered before we do anything else; e.g. the
* Constructor {@link #rollWriter()}.
* @param failIfLogDirExists If true IOException will be thrown if dir already exists.
* @param prefix should always be hostname and port in distributed env and
* it will be URL encoded before being used.
* If prefix is null, "hlog" will be used
* @throws IOException
*/
public HLog(final FileSystem fs, final Path dir, final Path oldLogDir,
final Configuration conf, final List<WALActionsListener> listeners,
final boolean failIfLogDirExists, final String prefix)
throws IOException {
super();
this.fs = fs;
this.dir = dir;
this.conf = conf;
if (listeners != null) {
for (WALActionsListener i: listeners) {
registerWALActionsListener(i);
}
}
this.blocksize = conf.getLong("hbase.regionserver.hlog.blocksize",
getDefaultBlockSize());
// Roll at 95% of block size.
float multi = conf.getFloat("hbase.regionserver.logroll.multiplier", 0.95f);
this.logrollsize = (long)(this.blocksize * multi);
this.optionalFlushInterval =
conf.getLong("hbase.regionserver.optionallogflushinterval", 1 * 1000);
if (failIfLogDirExists && fs.exists(dir)) {
throw new IOException("Target HLog directory already exists: " + dir);
}
if (!fs.mkdirs(dir)) {
throw new IOException("Unable to mkdir " + dir);
}
this.oldLogDir = oldLogDir;
if (!fs.exists(oldLogDir)) {
if (!fs.mkdirs(this.oldLogDir)) {
throw new IOException("Unable to mkdir " + this.oldLogDir);
}
}
this.maxLogs = conf.getInt("hbase.regionserver.maxlogs", 32);
this.minTolerableReplication = conf.getInt(
"hbase.regionserver.hlog.tolerable.lowreplication",
this.fs.getDefaultReplication());
this.lowReplicationRollLimit = conf.getInt(
"hbase.regionserver.hlog.lowreplication.rolllimit", 5);
this.enabled = conf.getBoolean("hbase.regionserver.hlog.enabled", true);
this.closeErrorsTolerated = conf.getInt(
"hbase.regionserver.logroll.errors.tolerated", 0);
LOG.info("HLog configuration: blocksize=" +
StringUtils.byteDesc(this.blocksize) +
", rollsize=" + StringUtils.byteDesc(this.logrollsize) +
", enabled=" + this.enabled +
", optionallogflushinternal=" + this.optionalFlushInterval + "ms");
// If prefix is null||empty then just name it hlog
this.prefix = prefix == null || prefix.isEmpty() ?
"hlog" : URLEncoder.encode(prefix, "UTF8");
// rollWriter sets this.hdfs_out if it can.
rollWriter();
// handle the reflection necessary to call getNumCurrentReplicas()
this.getNumCurrentReplicas = getGetNumCurrentReplicas(this.hdfs_out);
logSyncerThread = new LogSyncer(this.optionalFlushInterval);
Threads.setDaemonThreadRunning(logSyncerThread.getThread(),
Thread.currentThread().getName() + ".logSyncer");
coprocessorHost = new WALCoprocessorHost(this, conf);
}
// use reflection to search for getDefaultBlockSize(Path f)
// if the method doesn't exist, fall back to using getDefaultBlockSize()
private long getDefaultBlockSize() throws IOException {
Method m = null;
Class<? extends FileSystem> cls = this.fs.getClass();
try {
m = cls.getMethod("getDefaultBlockSize",
new Class<?>[] { Path.class });
} catch (NoSuchMethodException e) {
LOG.info("FileSystem doesn't support getDefaultBlockSize");
} catch (SecurityException e) {
LOG.info("Doesn't have access to getDefaultBlockSize on "
+ "FileSystems", e);
m = null; // could happen on setAccessible()
}
if (null == m) {
return this.fs.getDefaultBlockSize();
} else {
try {
Object ret = m.invoke(this.fs, this.dir);
return ((Long)ret).longValue();
} catch (Exception e) {
throw new IOException(e);
}
}
}
/**
* Find the 'getNumCurrentReplicas' on the passed <code>os</code> stream.
* @return Method or null.
*/
private Method getGetNumCurrentReplicas(final FSDataOutputStream os) {
Method m = null;
if (os != null) {
Class<? extends OutputStream> wrappedStreamClass = os.getWrappedStream()
.getClass();
try {
m = wrappedStreamClass.getDeclaredMethod("getNumCurrentReplicas",
new Class<?>[] {});
m.setAccessible(true);
} catch (NoSuchMethodException e) {
LOG.info("FileSystem's output stream doesn't support"
+ " getNumCurrentReplicas; --HDFS-826 not available; fsOut="
+ wrappedStreamClass.getName());
} catch (SecurityException e) {
LOG.info("Doesn't have access to getNumCurrentReplicas on "
+ "FileSystems's output stream --HDFS-826 not available; fsOut="
+ wrappedStreamClass.getName(), e);
m = null; // could happen on setAccessible()
}
}
if (m != null) {
LOG.info("Using getNumCurrentReplicas--HDFS-826");
}
return m;
}
public void registerWALActionsListener(final WALActionsListener listener) {
this.listeners.add(listener);
}
public boolean unregisterWALActionsListener(final WALActionsListener listener) {
return this.listeners.remove(listener);
}
/**
* @return Current state of the monotonically increasing file id.
*/
public long getFilenum() {
return this.filenum;
}
/**
* Called by HRegionServer when it opens a new region to ensure that log
* sequence numbers are always greater than the latest sequence number of the
* region being brought on-line.
*
* @param newvalue We'll set log edit/sequence number to this value if it
* is greater than the current value.
*/
public void setSequenceNumber(final long newvalue) {
for (long id = this.logSeqNum.get(); id < newvalue &&
!this.logSeqNum.compareAndSet(id, newvalue); id = this.logSeqNum.get()) {
// This could spin on occasion but better the occasional spin than locking
// every increment of sequence number.
LOG.debug("Changed sequenceid from " + logSeqNum + " to " + newvalue);
}
}
/**
* @return log sequence number
*/
public long getSequenceNumber() {
return logSeqNum.get();
}
/**
* Method used internal to this class and for tests only.
* @return The wrapped stream our writer is using; its not the
* writer's 'out' FSDatoOutputStream but the stream that this 'out' wraps
* (In hdfs its an instance of DFSDataOutputStream).
*/
// usage: see TestLogRolling.java
OutputStream getOutputStream() {
return this.hdfs_out.getWrappedStream();
}
/**
* Roll the log writer. That is, start writing log messages to a new file.
*
* Because a log cannot be rolled during a cache flush, and a cache flush
* spans two method calls, a special lock needs to be obtained so that a cache
* flush cannot start when the log is being rolled and the log cannot be
* rolled during a cache flush.
*
* <p>Note that this method cannot be synchronized because it is possible that
* startCacheFlush runs, obtaining the cacheFlushLock, then this method could
* start which would obtain the lock on this but block on obtaining the
* cacheFlushLock and then completeCacheFlush could be called which would wait
* for the lock on this and consequently never release the cacheFlushLock
*
* @return If lots of logs, flush the returned regions so next time through
* we can clean logs. Returns null if nothing to flush. Names are actual
* region names as returned by {@link HRegionInfo#getEncodedName()}
* @throws org.apache.hadoop.hbase.regionserver.wal.FailedLogCloseException
* @throws IOException
*/
public byte [][] rollWriter() throws FailedLogCloseException, IOException {
return rollWriter(false);
}
/**
* Roll the log writer. That is, start writing log messages to a new file.
*
* Because a log cannot be rolled during a cache flush, and a cache flush
* spans two method calls, a special lock needs to be obtained so that a cache
* flush cannot start when the log is being rolled and the log cannot be
* rolled during a cache flush.
*
* <p>Note that this method cannot be synchronized because it is possible that
* startCacheFlush runs, obtaining the cacheFlushLock, then this method could
* start which would obtain the lock on this but block on obtaining the
* cacheFlushLock and then completeCacheFlush could be called which would wait
* for the lock on this and consequently never release the cacheFlushLock
*
* @param force If true, force creation of a new writer even if no entries
* have been written to the current writer
* @return If lots of logs, flush the returned regions so next time through
* we can clean logs. Returns null if nothing to flush. Names are actual
* region names as returned by {@link HRegionInfo#getEncodedName()}
* @throws org.apache.hadoop.hbase.regionserver.wal.FailedLogCloseException
* @throws IOException
*/
public byte [][] rollWriter(boolean force)
throws FailedLogCloseException, IOException {
// Return if nothing to flush.
if (!force && this.writer != null && this.numEntries.get() <= 0) {
return null;
}
byte [][] regionsToFlush = null;
this.cacheFlushLock.lock();
this.logRollRunning = true;
try {
if (closed) {
LOG.debug("HLog closed. Skipping rolling of writer");
return regionsToFlush;
}
// Do all the preparation outside of the updateLock to block
// as less as possible the incoming writes
long currentFilenum = this.filenum;
Path oldPath = null;
if (currentFilenum > 0) {
oldPath = computeFilename(currentFilenum);
}
this.filenum = System.currentTimeMillis();
Path newPath = computeFilename();
// Tell our listeners that a new log is about to be created
if (!this.listeners.isEmpty()) {
for (WALActionsListener i : this.listeners) {
i.preLogRoll(oldPath, newPath);
}
}
HLog.Writer nextWriter = this.createWriterInstance(fs, newPath, conf);
// Can we get at the dfsclient outputstream? If an instance of
// SFLW, it'll have done the necessary reflection to get at the
// protected field name.
FSDataOutputStream nextHdfsOut = null;
if (nextWriter instanceof SequenceFileLogWriter) {
nextHdfsOut = ((SequenceFileLogWriter)nextWriter).getWriterFSDataOutputStream();
}
// Tell our listeners that a new log was created
if (!this.listeners.isEmpty()) {
for (WALActionsListener i : this.listeners) {
i.postLogRoll(oldPath, newPath);
}
}
synchronized (updateLock) {
// Clean up current writer.
Path oldFile = cleanupCurrentWriter(currentFilenum);
this.writer = nextWriter;
this.hdfs_out = nextHdfsOut;
LOG.info((oldFile != null?
"Roll " + FSUtils.getPath(oldFile) + ", entries=" +
this.numEntries.get() +
", filesize=" +
this.fs.getFileStatus(oldFile).getLen() + ". ": "") +
" for " + FSUtils.getPath(newPath));
this.numEntries.set(0);
}
// Can we delete any of the old log files?
if (this.outputfiles.size() > 0) {
if (this.lastSeqWritten.isEmpty()) {
LOG.debug("Last sequenceid written is empty. Deleting all old hlogs");
// If so, then no new writes have come in since all regions were
// flushed (and removed from the lastSeqWritten map). Means can
// remove all but currently open log file.
for (Map.Entry<Long, Path> e : this.outputfiles.entrySet()) {
archiveLogFile(e.getValue(), e.getKey());
}
this.outputfiles.clear();
} else {
regionsToFlush = cleanOldLogs();
}
}
} finally {
this.logRollRunning = false;
this.cacheFlushLock.unlock();
}
return regionsToFlush;
}
/**
* This method allows subclasses to inject different writers without having to
* extend other methods like rollWriter().
*
* @param fs
* @param path
* @param conf
* @return Writer instance
* @throws IOException
*/
protected Writer createWriterInstance(final FileSystem fs, final Path path,
final Configuration conf) throws IOException {
return createWriter(fs, path, conf);
}
/**
* Get a reader for the WAL.
* @param fs
* @param path
* @param conf
* @return A WAL reader. Close when done with it.
* @throws IOException
*/
public static Reader getReader(final FileSystem fs,
final Path path, Configuration conf)
throws IOException {
try {
if (logReaderClass == null) {
logReaderClass = conf.getClass("hbase.regionserver.hlog.reader.impl",
SequenceFileLogReader.class, Reader.class);
}
HLog.Reader reader = logReaderClass.newInstance();
reader.init(fs, path, conf);
return reader;
} catch (IOException e) {
throw e;
}
catch (Exception e) {
throw new IOException("Cannot get log reader", e);
}
}
/**
* Get a writer for the WAL.
* @param path
* @param conf
* @return A WAL writer. Close when done with it.
* @throws IOException
*/
public static Writer createWriter(final FileSystem fs,
final Path path, Configuration conf)
throws IOException {
try {
if (logWriterClass == null) {
logWriterClass = conf.getClass("hbase.regionserver.hlog.writer.impl",
SequenceFileLogWriter.class, Writer.class);
}
HLog.Writer writer = (HLog.Writer) logWriterClass.newInstance();
writer.init(fs, path, conf);
return writer;
} catch (Exception e) {
throw new IOException("cannot get log writer", e);
}
}
/*
* Clean up old commit logs.
* @return If lots of logs, flush the returned region so next time through
* we can clean logs. Returns null if nothing to flush. Returns array of
* encoded region names to flush.
* @throws IOException
*/
private byte [][] cleanOldLogs() throws IOException {
Long oldestOutstandingSeqNum = getOldestOutstandingSeqNum();
// Get the set of all log files whose last sequence number is smaller than
// the oldest edit's sequence number.
TreeSet<Long> sequenceNumbers =
new TreeSet<Long>(this.outputfiles.headMap(
(Long.valueOf(oldestOutstandingSeqNum.longValue()))).keySet());
// Now remove old log files (if any)
int logsToRemove = sequenceNumbers.size();
if (logsToRemove > 0) {
if (LOG.isDebugEnabled()) {
// Find associated region; helps debugging.
byte [] oldestRegion = getOldestRegion(oldestOutstandingSeqNum);
LOG.debug("Found " + logsToRemove + " hlogs to remove" +
" out of total " + this.outputfiles.size() + ";" +
" oldest outstanding sequenceid is " + oldestOutstandingSeqNum +
" from region " + Bytes.toStringBinary(oldestRegion));
}
for (Long seq : sequenceNumbers) {
archiveLogFile(this.outputfiles.remove(seq), seq);
}
}
// If too many log files, figure which regions we need to flush.
// Array is an array of encoded region names.
byte [][] regions = null;
int logCount = this.outputfiles == null? 0: this.outputfiles.size();
if (logCount > this.maxLogs && logCount > 0) {
// This is an array of encoded region names.
regions = findMemstoresWithEditsEqualOrOlderThan(this.outputfiles.firstKey(),
this.lastSeqWritten);
if (regions != null) {
StringBuilder sb = new StringBuilder();
for (int i = 0; i < regions.length; i++) {
if (i > 0) sb.append(", ");
sb.append(Bytes.toStringBinary(regions[i]));
}
LOG.info("Too many hlogs: logs=" + logCount + ", maxlogs=" +
this.maxLogs + "; forcing flush of " + regions.length + " regions(s): " +
sb.toString());
}
}
return regions;
}
/**
* Return regions (memstores) that have edits that are equal or less than
* the passed <code>oldestWALseqid</code>.
* @param oldestWALseqid
* @param regionsToSeqids Encoded region names to sequence ids
* @return All regions whose seqid is < than <code>oldestWALseqid</code> (Not
* necessarily in order). Null if no regions found.
*/
static byte [][] findMemstoresWithEditsEqualOrOlderThan(final long oldestWALseqid,
final Map<byte [], Long> regionsToSeqids) {
// This method is static so it can be unit tested the easier.
List<byte []> regions = null;
for (Map.Entry<byte [], Long> e: regionsToSeqids.entrySet()) {
if (e.getValue().longValue() <= oldestWALseqid) {
if (regions == null) regions = new ArrayList<byte []>();
// Key is encoded region name.
regions.add(e.getKey());
}
}
return regions == null?
null: regions.toArray(new byte [][] {HConstants.EMPTY_BYTE_ARRAY});
}
/*
* @return Logs older than this id are safe to remove.
*/
private Long getOldestOutstandingSeqNum() {
return Collections.min(this.lastSeqWritten.values());
}
/**
* @param oldestOutstandingSeqNum
* @return (Encoded) name of oldest outstanding region.
*/
private byte [] getOldestRegion(final Long oldestOutstandingSeqNum) {
byte [] oldestRegion = null;
for (Map.Entry<byte [], Long> e: this.lastSeqWritten.entrySet()) {
if (e.getValue().longValue() == oldestOutstandingSeqNum.longValue()) {
// Key is encoded region name.
oldestRegion = e.getKey();
break;
}
}
return oldestRegion;
}
/*
* Cleans up current writer closing and adding to outputfiles.
* Presumes we're operating inside an updateLock scope.
* @return Path to current writer or null if none.
* @throws IOException
*/
Path cleanupCurrentWriter(final long currentfilenum) throws IOException {
Path oldFile = null;
if (this.writer != null) {
// Close the current writer, get a new one.
try {
// Wait till all current transactions are written to the hlog.
// No new transactions can occur because we have the updatelock.
if (this.unflushedEntries.get() != this.syncedTillHere) {
LOG.debug("cleanupCurrentWriter " +
" waiting for transactions to get synced " +
" total " + this.unflushedEntries.get() +
" synced till here " + syncedTillHere);
sync();
}
this.writer.close();
this.writer = null;
closeErrorCount.set(0);
} catch (IOException e) {
LOG.error("Failed close of HLog writer", e);
int errors = closeErrorCount.incrementAndGet();
if (errors <= closeErrorsTolerated && !hasDeferredEntries()) {
LOG.warn("Riding over HLog close failure! error count="+errors);
} else {
if (hasDeferredEntries()) {
LOG.error("Aborting due to unflushed edits in HLog");
}
// Failed close of log file. Means we're losing edits. For now,
// shut ourselves down to minimize loss. Alternative is to try and
// keep going. See HBASE-930.
FailedLogCloseException flce =
new FailedLogCloseException("#" + currentfilenum);
flce.initCause(e);
throw flce;
}
}
if (currentfilenum >= 0) {
oldFile = computeFilename(currentfilenum);
this.outputfiles.put(Long.valueOf(this.logSeqNum.get()), oldFile);
}
}
return oldFile;
}
private void archiveLogFile(final Path p, final Long seqno) throws IOException {
Path newPath = getHLogArchivePath(this.oldLogDir, p);
LOG.info("moving old hlog file " + FSUtils.getPath(p) +
" whose highest sequenceid is " + seqno + " to " +
FSUtils.getPath(newPath));
// Tell our listeners that a log is going to be archived.
if (!this.listeners.isEmpty()) {
for (WALActionsListener i : this.listeners) {
i.preLogArchive(p, newPath);
}
}
if (!this.fs.rename(p, newPath)) {
throw new IOException("Unable to rename " + p + " to " + newPath);
}
// Tell our listeners that a log has been archived.
if (!this.listeners.isEmpty()) {
for (WALActionsListener i : this.listeners) {
i.postLogArchive(p, newPath);
}
}
}
/**
* This is a convenience method that computes a new filename with a given
* using the current HLog file-number
* @return Path
*/
protected Path computeFilename() {
return computeFilename(this.filenum);
}
/**
* This is a convenience method that computes a new filename with a given
* file-number.
* @param filenum to use
* @return Path
*/
protected Path computeFilename(long filenum) {
if (filenum < 0) {
throw new RuntimeException("hlog file number can't be < 0");
}
return new Path(dir, prefix + "." + filenum);
}
/**
* Shut down the log and delete the log directory
*
* @throws IOException
*/
public void closeAndDelete() throws IOException {
close();
if (!fs.exists(this.dir)) return;
FileStatus[] files = fs.listStatus(this.dir);
for(FileStatus file : files) {
Path p = getHLogArchivePath(this.oldLogDir, file.getPath());
// Tell our listeners that a log is going to be archived.
if (!this.listeners.isEmpty()) {
for (WALActionsListener i : this.listeners) {
i.preLogArchive(file.getPath(), p);
}
}
if (!fs.rename(file.getPath(),p)) {
throw new IOException("Unable to rename " + file.getPath() + " to " + p);
}
// Tell our listeners that a log was archived.
if (!this.listeners.isEmpty()) {
for (WALActionsListener i : this.listeners) {
i.postLogArchive(file.getPath(), p);
}
}
}
LOG.debug("Moved " + files.length + " log files to " +
FSUtils.getPath(this.oldLogDir));
if (!fs.delete(dir, true)) {
LOG.info("Unable to delete " + dir);
}
}
/**
* Shut down the log.
*
* @throws IOException
*/
public void close() throws IOException {
try {
logSyncerThread.close();
// Make sure we synced everything
logSyncerThread.join(this.optionalFlushInterval*2);
} catch (InterruptedException e) {
LOG.error("Exception while waiting for syncer thread to die", e);
}
cacheFlushLock.lock();
try {
// Tell our listeners that the log is closing
if (!this.listeners.isEmpty()) {
for (WALActionsListener i : this.listeners) {
i.logCloseRequested();
}
}
synchronized (updateLock) {
this.closed = true;
if (LOG.isDebugEnabled()) {
LOG.debug("closing hlog writer in " + this.dir.toString());
}
if (this.writer != null) {
this.writer.close();
}
}
} finally {
cacheFlushLock.unlock();
}
}
/**
* @param now
* @param regionName
* @param tableName
* @param clusterId
* @return New log key.
*/
protected HLogKey makeKey(byte[] regionName, byte[] tableName, long seqnum,
long now, UUID clusterId) {
return new HLogKey(regionName, tableName, seqnum, now, clusterId);
}
/** Append an entry to the log.
*
* @param regionInfo
* @param logEdit
* @param logKey
* @param doSync shall we sync after writing the transaction
* @return The txid of this transaction
* @throws IOException
*/
public long append(HRegionInfo regionInfo, HLogKey logKey, WALEdit logEdit,
HTableDescriptor htd, boolean doSync)
throws IOException {
if (this.closed) {
throw new IOException("Cannot append; log is closed");
}
long txid = 0;
synchronized (updateLock) {
long seqNum = obtainSeqNum();
logKey.setLogSeqNum(seqNum);
// The 'lastSeqWritten' map holds the sequence number of the oldest
// write for each region (i.e. the first edit added to the particular
// memstore). When the cache is flushed, the entry for the
// region being flushed is removed if the sequence number of the flush
// is greater than or equal to the value in lastSeqWritten.
this.lastSeqWritten.putIfAbsent(regionInfo.getEncodedNameAsBytes(),
Long.valueOf(seqNum));
doWrite(regionInfo, logKey, logEdit, htd);
txid = this.unflushedEntries.incrementAndGet();
this.numEntries.incrementAndGet();
if (htd.isDeferredLogFlush()) {
lastDeferredTxid = txid;
}
}
// Sync if catalog region, and if not then check if that table supports
// deferred log flushing
if (doSync &&
(regionInfo.isMetaRegion() ||
!htd.isDeferredLogFlush())) {
// sync txn to file system
this.sync(txid);
}
return txid;
}
/**
* Only used in tests.
*
* @param info
* @param tableName
* @param edits
* @param now
* @param htd
* @throws IOException
*/
public void append(HRegionInfo info, byte [] tableName, WALEdit edits,
final long now, HTableDescriptor htd)
throws IOException {
append(info, tableName, edits, HConstants.DEFAULT_CLUSTER_ID, now, htd);
}
/**
* Append a set of edits to the log. Log edits are keyed by (encoded)
* regionName, rowname, and log-sequence-id.
*
* Later, if we sort by these keys, we obtain all the relevant edits for a
* given key-range of the HRegion (TODO). Any edits that do not have a
* matching COMPLETE_CACHEFLUSH message can be discarded.
*
* <p>
* Logs cannot be restarted once closed, or once the HLog process dies. Each
* time the HLog starts, it must create a new log. This means that other
* systems should process the log appropriately upon each startup (and prior
* to initializing HLog).
*
* synchronized prevents appends during the completion of a cache flush or for
* the duration of a log roll.
*
* @param info
* @param tableName
* @param edits
* @param clusterId The originating clusterId for this edit (for replication)
* @param now
* @param doSync shall we sync?
* @return txid of this transaction
* @throws IOException
*/
private long append(HRegionInfo info, byte [] tableName, WALEdit edits, UUID clusterId,
final long now, HTableDescriptor htd, boolean doSync)
throws IOException {
if (edits.isEmpty()) return this.unflushedEntries.get();;
if (this.closed) {
throw new IOException("Cannot append; log is closed");
}
long txid = 0;
synchronized (this.updateLock) {
long seqNum = obtainSeqNum();
// The 'lastSeqWritten' map holds the sequence number of the oldest
// write for each region (i.e. the first edit added to the particular
// memstore). . When the cache is flushed, the entry for the
// region being flushed is removed if the sequence number of the flush
// is greater than or equal to the value in lastSeqWritten.
// Use encoded name. Its shorter, guaranteed unique and a subset of
// actual name.
byte [] encodedRegionName = info.getEncodedNameAsBytes();
this.lastSeqWritten.putIfAbsent(encodedRegionName, seqNum);
HLogKey logKey = makeKey(encodedRegionName, tableName, seqNum, now, clusterId);
doWrite(info, logKey, edits, htd);
this.numEntries.incrementAndGet();
txid = this.unflushedEntries.incrementAndGet();
if (htd.isDeferredLogFlush()) {
lastDeferredTxid = txid;
}
}
// Sync if catalog region, and if not then check if that table supports
// deferred log flushing
if (doSync &&
(info.isMetaRegion() ||
!htd.isDeferredLogFlush())) {
// sync txn to file system
this.sync(txid);
}
return txid;
}
/**
* Append a set of edits to the log. Log edits are keyed by (encoded)
* regionName, rowname, and log-sequence-id. The HLog is not flushed
* after this transaction is written to the log.
*
* @param info
* @param tableName
* @param edits
* @param clusterId The originating clusterId for this edit (for replication)
* @param now
* @return txid of this transaction
* @throws IOException
*/
public long appendNoSync(HRegionInfo info, byte [] tableName, WALEdit edits,
UUID clusterId, final long now, HTableDescriptor htd)
throws IOException {
return append(info, tableName, edits, clusterId, now, htd, false);
}
/**
* Append a set of edits to the log. Log edits are keyed by (encoded)
* regionName, rowname, and log-sequence-id. The HLog is flushed
* after this transaction is written to the log.
*
* @param info
* @param tableName
* @param edits
* @param clusterId The originating clusterId for this edit (for replication)
* @param now
* @return txid of this transaction
* @throws IOException
*/
public long append(HRegionInfo info, byte [] tableName, WALEdit edits,
UUID clusterId, final long now, HTableDescriptor htd)
throws IOException {
return append(info, tableName, edits, clusterId, now, htd, true);
}
/**
* This thread is responsible to call syncFs and buffer up the writers while
* it happens.
*/
class LogSyncer extends HasThread {
private final long optionalFlushInterval;
private AtomicBoolean closeLogSyncer = new AtomicBoolean(false);
// List of pending writes to the HLog. There corresponds to transactions
// that have not yet returned to the client. We keep them cached here
// instead of writing them to HDFS piecemeal, because the HDFS write
// method is pretty heavyweight as far as locking is concerned. The
// goal is to increase the batchsize for writing-to-hdfs as well as
// sync-to-hdfs, so that we can get better system throughput.
private List<Entry> pendingWrites = new LinkedList<Entry>();
LogSyncer(long optionalFlushInterval) {
this.optionalFlushInterval = optionalFlushInterval;
}
@Override
public void run() {
try {
// awaiting with a timeout doesn't always
// throw exceptions on interrupt
while(!this.isInterrupted() && !closeLogSyncer.get()) {
try {
if (unflushedEntries.get() <= syncedTillHere) {
synchronized (closeLogSyncer) {
closeLogSyncer.wait(this.optionalFlushInterval);
}
}
sync();
} catch (IOException e) {
LOG.error("Error while syncing, requesting close of hlog ", e);
requestLogRoll();
}
}
} catch (InterruptedException e) {
LOG.debug(getName() + " interrupted while waiting for sync requests");
} finally {
LOG.info(getName() + " exiting");
}
}
// appends new writes to the pendingWrites. It is better to keep it in
// our own queue rather than writing it to the HDFS output stream because
// HDFSOutputStream.writeChunk is not lightweight at all.
synchronized void append(Entry e) throws IOException {
pendingWrites.add(e);
}
// Returns all currently pending writes. New writes
// will accumulate in a new list.
synchronized List<Entry> getPendingWrites() {
List<Entry> save = this.pendingWrites;
this.pendingWrites = new LinkedList<Entry>();
return save;
}
// writes out pending entries to the HLog
void hlogFlush(Writer writer, List<Entry> pending) throws IOException {
if (pending == null) return;
// write out all accumulated Entries to hdfs.
for (Entry e : pending) {
writer.append(e);
}
}
void close() {
synchronized (closeLogSyncer) {
closeLogSyncer.set(true);
closeLogSyncer.notifyAll();
}
}
}
// sync all known transactions
private void syncer() throws IOException {
syncer(this.unflushedEntries.get()); // sync all pending items
}
// sync all transactions upto the specified txid
private void syncer(long txid) throws IOException {
Writer tempWriter;
synchronized (this.updateLock) {
if (this.closed) return;
tempWriter = this.writer; // guaranteed non-null
}
// if the transaction that we are interested in is already
// synced, then return immediately.
if (txid <= this.syncedTillHere) {
return;
}
try {
long doneUpto;
long now = System.currentTimeMillis();
// First flush all the pending writes to HDFS. Then
// issue the sync to HDFS. If sync is successful, then update
// syncedTillHere to indicate that transactions till this
// number has been successfully synced.
synchronized (flushLock) {
if (txid <= this.syncedTillHere) {
return;
}
doneUpto = this.unflushedEntries.get();
List<Entry> pending = logSyncerThread.getPendingWrites();
try {
logSyncerThread.hlogFlush(tempWriter, pending);
} catch(IOException io) {
synchronized (this.updateLock) {
// HBASE-4387, HBASE-5623, retry with updateLock held
tempWriter = this.writer;
logSyncerThread.hlogFlush(tempWriter, pending);
}
}
}
// another thread might have sync'ed avoid double-sync'ing
if (txid <= this.syncedTillHere) {
return;
}
try {
tempWriter.sync();
} catch(IOException io) {
synchronized (this.updateLock) {
// HBASE-4387, HBASE-5623, retry with updateLock held
tempWriter = this.writer;
tempWriter.sync();
}
}
this.syncedTillHere = Math.max(this.syncedTillHere, doneUpto);
syncTime.inc(System.currentTimeMillis() - now);
if (!this.logRollRunning) {
checkLowReplication();
try {
if (tempWriter.getLength() > this.logrollsize) {
requestLogRoll();
}
} catch (IOException x) {
LOG.debug("Log roll failed and will be retried. (This is not an error)");
}
}
} catch (IOException e) {
LOG.fatal("Could not sync. Requesting close of hlog", e);
requestLogRoll();
throw e;
}
}
private void checkLowReplication() {
// if the number of replicas in HDFS has fallen below the configured
// value, then roll logs.
try {
int numCurrentReplicas = getLogReplication();
if (numCurrentReplicas != 0
&& numCurrentReplicas < this.minTolerableReplication) {
if (this.lowReplicationRollEnabled) {
if (this.consecutiveLogRolls < this.lowReplicationRollLimit) {
LOG.warn("HDFS pipeline error detected. " + "Found "
+ numCurrentReplicas + " replicas but expecting no less than "
+ this.minTolerableReplication + " replicas. "
+ " Requesting close of hlog.");
requestLogRoll();
// If rollWriter is requested, increase consecutiveLogRolls. Once it
// is larger than lowReplicationRollLimit, disable the
// LowReplication-Roller
this.consecutiveLogRolls++;
} else {
LOG.warn("Too many consecutive RollWriter requests, it's a sign of "
+ "the total number of live datanodes is lower than the tolerable replicas.");
this.consecutiveLogRolls = 0;
this.lowReplicationRollEnabled = false;
}
}
} else if (numCurrentReplicas >= this.minTolerableReplication) {
if (!this.lowReplicationRollEnabled) {
// The new writer's log replicas is always the default value.
// So we should not enable LowReplication-Roller. If numEntries
// is lower than or equals 1, we consider it as a new writer.
if (this.numEntries.get() <= 1) {
return;
}
// Once the live datanode number and the replicas return to normal,
// enable the LowReplication-Roller.
this.lowReplicationRollEnabled = true;
LOG.info("LowReplication-Roller was enabled.");
}
}
} catch (Exception e) {
LOG.warn("Unable to invoke DFSOutputStream.getNumCurrentReplicas" + e +
" still proceeding ahead...");
}
}
/**
* This method gets the datanode replication count for the current HLog.
*
* If the pipeline isn't started yet or is empty, you will get the default
* replication factor. Therefore, if this function returns 0, it means you
* are not properly running with the HDFS-826 patch.
* @throws InvocationTargetException
* @throws IllegalAccessException
* @throws IllegalArgumentException
*
* @throws Exception
*/
int getLogReplication()
throws IllegalArgumentException, IllegalAccessException, InvocationTargetException {
if (this.getNumCurrentReplicas != null && this.hdfs_out != null) {
Object repl = this.getNumCurrentReplicas.invoke(getOutputStream(), NO_ARGS);
if (repl instanceof Integer) {
return ((Integer)repl).intValue();
}
}
return 0;
}
boolean canGetCurReplicas() {
return this.getNumCurrentReplicas != null;
}
public void hsync() throws IOException {
syncer();
}
public void hflush() throws IOException {
syncer();
}
public void sync() throws IOException {
syncer();
}
public void sync(long txid) throws IOException {
syncer(txid);
}
private void requestLogRoll() {
if (!this.listeners.isEmpty()) {
for (WALActionsListener i: this.listeners) {
i.logRollRequested();
}
}
}
protected void doWrite(HRegionInfo info, HLogKey logKey, WALEdit logEdit,
HTableDescriptor htd)
throws IOException {
if (!this.enabled) {
return;
}
if (!this.listeners.isEmpty()) {
for (WALActionsListener i: this.listeners) {
i.visitLogEntryBeforeWrite(htd, logKey, logEdit);
}
}
try {
long now = System.currentTimeMillis();
// coprocessor hook:
if (!coprocessorHost.preWALWrite(info, logKey, logEdit)) {
// write to our buffer for the Hlog file.
logSyncerThread.append(new HLog.Entry(logKey, logEdit));
}
long took = System.currentTimeMillis() - now;
coprocessorHost.postWALWrite(info, logKey, logEdit);
writeTime.inc(took);
long len = 0;
for (KeyValue kv : logEdit.getKeyValues()) {
len += kv.getLength();
}
writeSize.inc(len);
if (took > 1000) {
LOG.warn(String.format(
"%s took %d ms appending an edit to hlog; editcount=%d, len~=%s",
Thread.currentThread().getName(), took, this.numEntries.get(),
StringUtils.humanReadableInt(len)));
slowHLogAppendCount.incrementAndGet();
slowHLogAppendTime.inc(took);
}
} catch (IOException e) {
LOG.fatal("Could not append. Requesting close of hlog", e);
requestLogRoll();
throw e;
}
}
/** @return How many items have been added to the log */
int getNumEntries() {
return numEntries.get();
}
/**
* Obtain a log sequence number.
*/
private long obtainSeqNum() {
return this.logSeqNum.incrementAndGet();
}
/** @return the number of log files in use */
int getNumLogFiles() {
return outputfiles.size();
}
private byte[] getSnapshotName(byte[] encodedRegionName) {
byte snp[] = new byte[encodedRegionName.length + 3];
// an encoded region name has only hex digits. s, n or p are not hex
// and therefore snapshot-names will never collide with
// encoded-region-names
snp[0] = 's'; snp[1] = 'n'; snp[2] = 'p';
for (int i = 0; i < encodedRegionName.length; i++) {
snp[i+3] = encodedRegionName[i];
}
return snp;
}
/**
* By acquiring a log sequence ID, we can allow log messages to continue while
* we flush the cache.
*
* Acquire a lock so that we do not roll the log between the start and
* completion of a cache-flush. Otherwise the log-seq-id for the flush will
* not appear in the correct logfile.
*
* Ensuring that flushes and log-rolls don't happen concurrently also allows
* us to temporarily put a log-seq-number in lastSeqWritten against the region
* being flushed that might not be the earliest in-memory log-seq-number for
* that region. By the time the flush is completed or aborted and before the
* cacheFlushLock is released it is ensured that lastSeqWritten again has the
* oldest in-memory edit's lsn for the region that was being flushed.
*
* In this method, by removing the entry in lastSeqWritten for the region
* being flushed we ensure that the next edit inserted in this region will be
* correctly recorded in {@link #append(HRegionInfo, byte[], WALEdit, long, HTableDescriptor)} The
* lsn of the earliest in-memory lsn - which is now in the memstore snapshot -
* is saved temporarily in the lastSeqWritten map while the flush is active.
*
* @return sequence ID to pass
* {@link #completeCacheFlush(byte[], byte[], long, boolean)} (byte[],
* byte[], long)}
* @see #completeCacheFlush(byte[], byte[], long, boolean)
* @see #abortCacheFlush(byte[])
*/
public long startCacheFlush(final byte[] encodedRegionName) {
this.cacheFlushLock.lock();
Long seq = this.lastSeqWritten.remove(encodedRegionName);
// seq is the lsn of the oldest edit associated with this region. If a
// snapshot already exists - because the last flush failed - then seq will
// be the lsn of the oldest edit in the snapshot
if (seq != null) {
// keeping the earliest sequence number of the snapshot in
// lastSeqWritten maintains the correctness of
// getOldestOutstandingSeqNum(). But it doesn't matter really because
// everything is being done inside of cacheFlush lock.
Long oldseq =
lastSeqWritten.put(getSnapshotName(encodedRegionName), seq);
if (oldseq != null) {
LOG.error("Logic Error Snapshot seq id from earlier flush still" +
" present! for region " + Bytes.toString(encodedRegionName) +
" overwritten oldseq=" + oldseq + "with new seq=" + seq);
Runtime.getRuntime().halt(1);
}
}
return obtainSeqNum();
}
/**
* Complete the cache flush
*
* Protected by cacheFlushLock
*
* @param encodedRegionName
* @param tableName
* @param logSeqId
* @throws IOException
*/
public void completeCacheFlush(final byte [] encodedRegionName,
final byte [] tableName, final long logSeqId, final boolean isMetaRegion)
throws IOException {
try {
if (this.closed) {
return;
}
long txid = 0;
synchronized (updateLock) {
long now = System.currentTimeMillis();
WALEdit edit = completeCacheFlushLogEdit();
HLogKey key = makeKey(encodedRegionName, tableName, logSeqId,
System.currentTimeMillis(), HConstants.DEFAULT_CLUSTER_ID);
logSyncerThread.append(new Entry(key, edit));
txid = this.unflushedEntries.incrementAndGet();
writeTime.inc(System.currentTimeMillis() - now);
long len = 0;
for (KeyValue kv : edit.getKeyValues()) {
len += kv.getLength();
}
writeSize.inc(len);
this.numEntries.incrementAndGet();
}
// sync txn to file system
this.sync(txid);
} finally {
// updateLock not needed for removing snapshot's entry
// Cleaning up of lastSeqWritten is in the finally clause because we
// don't want to confuse getOldestOutstandingSeqNum()
this.lastSeqWritten.remove(getSnapshotName(encodedRegionName));
this.cacheFlushLock.unlock();
}
}
private WALEdit completeCacheFlushLogEdit() {
KeyValue kv = new KeyValue(METAROW, METAFAMILY, null,
System.currentTimeMillis(), COMPLETE_CACHE_FLUSH);
WALEdit e = new WALEdit();
e.add(kv);
return e;
}
/**
* Abort a cache flush.
* Call if the flush fails. Note that the only recovery for an aborted flush
* currently is a restart of the regionserver so the snapshot content dropped
* by the failure gets restored to the memstore.
*/
public void abortCacheFlush(byte[] encodedRegionName) {
Long snapshot_seq =
this.lastSeqWritten.remove(getSnapshotName(encodedRegionName));
if (snapshot_seq != null) {
// updateLock not necessary because we are racing against
// lastSeqWritten.putIfAbsent() in append() and we will always win
// before releasing cacheFlushLock make sure that the region's entry in
// lastSeqWritten points to the earliest edit in the region
Long current_memstore_earliest_seq =
this.lastSeqWritten.put(encodedRegionName, snapshot_seq);
if (current_memstore_earliest_seq != null &&
(current_memstore_earliest_seq.longValue() <=
snapshot_seq.longValue())) {
LOG.error("Logic Error region " + Bytes.toString(encodedRegionName) +
"acquired edits out of order current memstore seq=" +
current_memstore_earliest_seq + " snapshot seq=" + snapshot_seq);
Runtime.getRuntime().halt(1);
}
}
this.cacheFlushLock.unlock();
}
/**
* @param family
* @return true if the column is a meta column
*/
public static boolean isMetaFamily(byte [] family) {
return Bytes.equals(METAFAMILY, family);
}
/**
* Get LowReplication-Roller status
*
* @return lowReplicationRollEnabled
*/
public boolean isLowReplicationRollEnabled() {
return lowReplicationRollEnabled;
}
@SuppressWarnings("unchecked")
public static Class<? extends HLogKey> getKeyClass(Configuration conf) {
return (Class<? extends HLogKey>)
conf.getClass("hbase.regionserver.hlog.keyclass", HLogKey.class);
}
public static HLogKey newKey(Configuration conf) throws IOException {
Class<? extends HLogKey> keyClass = getKeyClass(conf);
try {
return keyClass.newInstance();
} catch (InstantiationException e) {
throw new IOException("cannot create hlog key");
} catch (IllegalAccessException e) {
throw new IOException("cannot create hlog key");
}
}
/**
* Utility class that lets us keep track of the edit with it's key
* Only used when splitting logs
*/
public static class Entry implements Writable {
private WALEdit edit;
private HLogKey key;
public Entry() {
edit = new WALEdit();
key = new HLogKey();
}
/**
* Constructor for both params
* @param edit log's edit
* @param key log's key
*/
public Entry(HLogKey key, WALEdit edit) {
super();
this.key = key;
this.edit = edit;
}
/**
* Gets the edit
* @return edit
*/
public WALEdit getEdit() {
return edit;
}
/**
* Gets the key
* @return key
*/
public HLogKey getKey() {
return key;
}
/**
* Set compression context for this entry.
* @param compressionContext Compression context
*/
public void setCompressionContext(CompressionContext compressionContext) {
edit.setCompressionContext(compressionContext);
key.setCompressionContext(compressionContext);
}
@Override
public String toString() {
return this.key + "=" + this.edit;
}
@Override
public void write(DataOutput dataOutput) throws IOException {
this.key.write(dataOutput);
this.edit.write(dataOutput);
}
@Override
public void readFields(DataInput dataInput) throws IOException {
this.key.readFields(dataInput);
this.edit.readFields(dataInput);
}
}
/**
* Construct the HLog directory name
*
* @param serverName Server name formatted as described in {@link ServerName}
* @return the HLog directory name
*/
public static String getHLogDirectoryName(final String serverName) {
StringBuilder dirName = new StringBuilder(HConstants.HREGION_LOGDIR_NAME);
dirName.append("/");
dirName.append(serverName);
return dirName.toString();
}
/**
* Get the directory we are making logs in.
*
* @return dir
*/
protected Path getDir() {
return dir;
}
public static boolean validateHLogFilename(String filename) {
return pattern.matcher(filename).matches();
}
static Path getHLogArchivePath(Path oldLogDir, Path p) {
return new Path(oldLogDir, p.getName());
}
static String formatRecoveredEditsFileName(final long seqid) {
return String.format("%019d", seqid);
}
/**
* Returns sorted set of edit files made by wal-log splitter, excluding files
* with '.temp' suffix.
* @param fs
* @param regiondir
* @return Files in passed <code>regiondir</code> as a sorted set.
* @throws IOException
*/
public static NavigableSet<Path> getSplitEditFilesSorted(final FileSystem fs,
final Path regiondir)
throws IOException {
NavigableSet<Path> filesSorted = new TreeSet<Path>();
Path editsdir = getRegionDirRecoveredEditsDir(regiondir);
if (!fs.exists(editsdir)) return filesSorted;
FileStatus[] files = FSUtils.listStatus(fs, editsdir, new PathFilter() {
@Override
public boolean accept(Path p) {
boolean result = false;
try {
// Return files and only files that match the editfile names pattern.
// There can be other files in this directory other than edit files.
// In particular, on error, we'll move aside the bad edit file giving
// it a timestamp suffix. See moveAsideBadEditsFile.
Matcher m = EDITFILES_NAME_PATTERN.matcher(p.getName());
result = fs.isFile(p) && m.matches();
// Skip the file whose name ends with RECOVERED_LOG_TMPFILE_SUFFIX,
// because it means splithlog thread is writting this file.
if (p.getName().endsWith(RECOVERED_LOG_TMPFILE_SUFFIX)) {
result = false;
}
} catch (IOException e) {
LOG.warn("Failed isFile check on " + p);
}
return result;
}
});
if (files == null) return filesSorted;
for (FileStatus status: files) {
filesSorted.add(status.getPath());
}
return filesSorted;
}
/**
* Move aside a bad edits file.
* @param fs
* @param edits Edits file to move aside.
* @return The name of the moved aside file.
* @throws IOException
*/
public static Path moveAsideBadEditsFile(final FileSystem fs,
final Path edits)
throws IOException {
Path moveAsideName = new Path(edits.getParent(), edits.getName() + "." +
System.currentTimeMillis());
if (!fs.rename(edits, moveAsideName)) {
LOG.warn("Rename failed from " + edits + " to " + moveAsideName);
}
return moveAsideName;
}
/**
* @param regiondir This regions directory in the filesystem.
* @return The directory that holds recovered edits files for the region
* <code>regiondir</code>
*/
public static Path getRegionDirRecoveredEditsDir(final Path regiondir) {
return new Path(regiondir, RECOVERED_EDITS_DIR);
}
public static final long FIXED_OVERHEAD = ClassSize.align(
ClassSize.OBJECT + (5 * ClassSize.REFERENCE) +
ClassSize.ATOMIC_INTEGER + Bytes.SIZEOF_INT + (3 * Bytes.SIZEOF_LONG));
private static void usage() {
System.err.println("Usage: HLog <ARGS>");
System.err.println("Arguments:");
System.err.println(" --dump Dump textual representation of passed one or more files");
System.err.println(" For example: HLog --dump hdfs://example.com:9000/hbase/.logs/MACHINE/LOGFILE");
System.err.println(" --split Split the passed directory of WAL logs");
System.err.println(" For example: HLog --split hdfs://example.com:9000/hbase/.logs/DIR");
}
private static void split(final Configuration conf, final Path p)
throws IOException {
FileSystem fs = FileSystem.get(conf);
if (!fs.exists(p)) {
throw new FileNotFoundException(p.toString());
}
final Path baseDir = new Path(conf.get(HConstants.HBASE_DIR));
final Path oldLogDir = new Path(baseDir, HConstants.HREGION_OLDLOGDIR_NAME);
if (!fs.getFileStatus(p).isDir()) {
throw new IOException(p + " is not a directory");
}
HLogSplitter logSplitter = HLogSplitter.createLogSplitter(
conf, baseDir, p, oldLogDir, fs);
logSplitter.splitLog();
}
/**
* @return Coprocessor host.
*/
public WALCoprocessorHost getCoprocessorHost() {
return coprocessorHost;
}
/** Provide access to currently deferred sequence num for tests */
boolean hasDeferredEntries() {
return lastDeferredTxid > syncedTillHere;
}
/**
* Pass one or more log file names and it will either dump out a text version
* on <code>stdout</code> or split the specified log files.
*
* @param args
* @throws IOException
*/
public static void main(String[] args) throws IOException {
if (args.length < 2) {
usage();
System.exit(-1);
}
// either dump using the HLogPrettyPrinter or split, depending on args
if (args[0].compareTo("--dump") == 0) {
HLogPrettyPrinter.run(Arrays.copyOfRange(args, 1, args.length));
} else if (args[0].compareTo("--split") == 0) {
Configuration conf = HBaseConfiguration.create();
for (int i = 1; i < args.length; i++) {
try {
conf.set("fs.default.name", args[i]);
conf.set("fs.defaultFS", args[i]);
Path logPath = new Path(args[i]);
split(conf, logPath);
} catch (Throwable t) {
t.printStackTrace(System.err);
System.exit(-1);
}
}
} else {
usage();
System.exit(-1);
}
}
}